TZ400 package monitor Mess

Similar Questions

• A slight doubt for Friday :) - (monitoring)

  Hi all

  I wonder if there are others who are watching the ODSEE and possibly another form of an environment hybrid DS using the CN = monitor package [1]?

  I know that this package is pretty old and looks like somehow abandoned (I tried to contact the dev - no response) but it seems to provide what I am after. Just wondering if there is

  something out there that would allow to better understand or that I should be directed to rather than cn = Monitor.

  o positive in my view is that this package monitors the cn = entry monitor directly rather than by a MIB or something.

  o it is relatively simple to install.

  [1] <http://cnmonitor.sourceforge.net control LDAP - CN = monitor

  -Kevin

  Hello

  To monitor Department, I see 3 options

  -Use of Oracle Enterprise Manager with the Department plugin as described in Oracle System Monitoring Plug-in for Oracle Directory Server

  -Use cn = Monitor directly

  -Use the package you mention.

  The layout of data in cn = Monitor is not officially documented and may be subject to changes between different versions, so, using the tools of Andreas Andersson can be risky because only a few people use it about and nobody took over the project I think. However, cn = size of the screen is fairly stable between versions, so it would be useful to give a try.

  Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• NB520 - get Bluetooth to work

  Hi all

  looking for advice on setting up bluetooth on my new laptop.
  Can't get the bluetooth device work properly.
  I downloaded the bluetooth driver package monitor & filter on the Toshiba site, nothing happens.

  Any advise?

  Also, I was informed there is a bluetooth 3.0 update available, but I am at a loss on how to do it too!

  Any help appreciated.

  First are you sure that your laptop supports Bluetooth?
  You have BT label at the bottom of the unit?
  What NB 520 - xxx you have exactly?

• Routing between LANs on X 0 and X 2

  I configured X 2 with a separate static IP X 0 and trying to get the subnet behind X 0 to communicate with the subnet behind X 2. For starters, I can't even a response from the X 2 IP address ping during the ping from a position on the X 0 subnet or even from the SonicWall diagnostic page.

  Package monitor reveals my ICMP packets are dropped due to a firewall rule, but I can't say who, or what it will take to allow packets between two subnets.

  I've worked a bit with the creation of a LAN-> firewall rule of LAN for all sources of ports/services all IP of destination X 2, then destination all IP interface, but still no response. I tried a firewall rule, all services/ports since a post on the X 0 LAN at all and still nothing

  It takes what firewall rule to allow traffic between my two subnets?

  If you try to ping IP address X 2 of X 0 field, you will need to add a ping management rule.

  LAN > LAN

  X 0 subnet > X 2 all IP management via Ping

• Lenovo Splitscreen messed my monitor - Ideapad Y560

  Hello. I have a Lenovo Ideapad y560 and completely messed up my monitor. The material is very well, but I played around it's a little bit and you click a custom split screen option and now I can only see a weird pattern now (didn't have a second monitor plugged. Maybe she?). I'm going to atach a picture so that you can see for yourself. I can still see my mouse and move t. and everything seems to work perfectly, but I can't see anything. I tried to reboot and after the login screen, he returned to the model. I can still start normally in safe mode without any problem.

  If you have a solution please let me know.

  The fixed! I ran repair the system and after the reboot, it works beautifully.

• VI Packager to pick up a big mess

  Hello

  I inherited a mess.

  I have used Labview 6.1 in the past, but I'm far from an expert, but I'm used to and understand almost everything.

  LabVIEW 6.1 had no project manager in former days.

  I have a VI that operates a piece of test equipment that is critical to our business. (I'll call him 'App')

  She was treated by several people on a journey of several years.

  -It was created in Labview but do not know what version.  It should always run using LV 2010 present environment (not a runtime engine).

  -He will NOT run in LV 2012.  I've tried it.

  -It was NOT created by using the project manager.  It's a bunch of VI and VI Sub and things that Labivew has decided that he needs.

  -He was always performed by using the LabView developers environment (it was never integrated into a standalone application.)

  -It is big enough and in all directions.

  -It has a scale, (NOR-DAQmx) and fuctions and calibration DAQ, files that I also keep intact.

  My question is: How can I "collect" all the bits and submarines in a project so I can compile in a stand-alone package?

  When I look at the main shaft of the VI, it called stuff in every sense, and these files that are in every sense are not in the folder where the main VI.

  Should change to LV2012, I'm afraid that if I Pack properly this application, I will never lose it.  Can I rev the application until 2012 of Labview?

  Is there a way to gather all this in a nice neat package by using the project manager or is there a 3rd party Packer that I can use?

  Specific useful responses are always very much appreciated.  Comments out of place, not so much.

  Lebowski

  If she should always run in LV2010 then continnue your development in LV2010.

  If you want to "Project-ize" the application then take an empty LabVIEW project and add the main VI. Under dependencies will be placed all the subVIs called. You can then use this list to drag - move add up all the necessary subVIs in space project, using virtual folders to make the easy to navigate look.

  To ensure that you have a good copy, use the feature save project as to make a copy of the project elsewhere (for example, a network location, or a memory stick) which will give you the option to include all dependencies.

  Cleaning the location of files, switch the elements of files project tree by selecting CTRL + E on each dependency and place the disk each dependency in a more preferable location. You can book this process for the cloned project to make sure that you don't move screw in the original application (which can be expected for other applications).

  Once here, you can then consider examines why it does not work in 2012, but if you need to work in 2010 I develop in 2012 because the conversion of backs can be heavy

• IOS monitoring packages

  Hi ARSHAD,.

  Posted by: albertobrivio - May 19, 2006, 8:11 am PST

  I would like to know if in IOS environment command like "show conn" or "capture" normally available in the firewall PIX, so take a look at the passage of package source/destination address/port interface.

  Concerning

  Alberto Brivio

  Alberto,

  If you have IOS Firewall context, then you can get the output as

  See IP inspect session details (if you have a firewall IOS configured and applied on the interface).

  If you want to monitor all packets go out from the interface, you must check the technology "netflow".

  Activate "penetration of ip stream" on the specific interface and then 'show ip cache flow' you will be able to see the flow of traffic.

  If you are interested in some features like 'tcpdump' ability to sniff in IOS let me know as well.

  Thanks and greetings

  Arshad

• Cursor mess between monitors in a dual configuration monitor

  I have a Setup dual monitor and often when I move my cursor between two monitors using the lower part of the screen the cursor takes the form (usually to something that resembles an eyelash on the side). I can usually force it to change by moving quickly in this area several times until it turns into. The drivers are up to date and I noticed a number of messages concerning similar behavior, I can't find a permanent solution. I tried to change the profile of cursor and that had no effect on the behavior.

  I would really appreciate it if someone could put a permanent solution to the problem.

  Thank you!

  Hello

  I read a lot about this too without encountering a 100% checked the solution that worked for each user with this problem. I doubt that there is a reason or cause behind it.

  This does not sound like a problem with the graphics card driver, so you will want to ensure that you have updated if you have not already.

  I read that if you enable the functionality of the mouse trail, then turn to the track all the way up to 0, where it is not visible, you can work around the problem. It is more of a workaround, but if the results are not having the cursor between displays to spoil, it is worth giving a shot.

• I mess with the display option (win + p), monitor losing signal, cannot bring him back.

  At first, I have a monitor, I tried something and end by pressing win + p and change the mode of display for projector only, losing the signal on my screen and can't put back T_T.

  Try win + P several times, it does not work. (A DVI connect to display the map - work).

  Then I stop, reboot, no signal is returned.

  Then I have connected 2 monitors and signal is back, I can change all fashion perfectly. (1 DVI + 1 D - sub - work)

  But, when I remove another monitor signal back to the first step. No signal to monitor. (1 DVI works again - not)

  So now I have to connect Monitor 2 (even if I don't use it) and there is signal monitor, if I remove one, I lose everything.

  Do you have any idea how to fix this annoying problem?

  Fixed it, by removing the cable, put the cable, remove the other insert this one delete and in about 50 times and windows blend and fix it for me * _ *;

• Cisco IDS 4.1 probes in HA? monitor package drops?

  Hello

  can someone tell me if Cisco IDS sensors provide high availability or failover capabilities? If so, how and where to fix?

  Is there a form any notification drop package when sensor starts a fall of packages under full load?

  Hello

  IDS sensors do not provide high availability or failover capability.

  Under a high load of the sensor can be configured to alert of hamid question the 993 which States "package dropout rate exceeded the threshold. This threshold is set by default to 5% (Total dropped packets / Total packets received in a time interval). You must enable this GIS as it is disabled by default.

  Hope this helps

  Thank you

  Madhu

• The Oracle has EM package for monitoring Data guard

  I need to know if a EM supervisory package Dataguard Oracle, that's our SSO database that is replicated through Data guard

  Hello

  It can control and you can click on a button in MS do the switchover - it is fully integrated.

  Don't know what 'pack' it is considered part of the property... or if you have some of them, without needing extra licenses - not sure.

  See you soon,.

  Rich

• Content of library photos - necessary Expert Package

  I've had my MacBook for about 5 years now and I have an insane amount of Photos stored for the past 14 years, but during that time, my library of Photos being scenes has become a bit of a mess. (I think)

  My photo library app itself is very good, but there a total of scatter gun approach to sync my Photos with iTunes (via a cable not iCloud) allows to synchronize some and not others. Now he has decided to not to sync album art by June 2016 for some strange reason.

  I think that it has been corrupted and dare I say I have tinkered around with the "package contents" so I need help

  What records I should have in the contents of package of Photos? I have the following: -.

  Apple TV Photo Cache - I know it's for my Apple TV which is fine

  Spare part - no article here

  Data - photos contained here, no idea what it is for?

  Data.noindex - photos contained here like above?

  database

  iPhotolock.data

  iPod Photo Cache - I know that allows you to synchronize the photos to my iPhone and I deleted before you try and make it work

  Masks - no article here

  Masters - it's the only place where my original showing in Photos is kept? (14 items)

  Plug-Ins - no article here

  Previews - curious as to what this is?

  Private - no idea what it is for?

  ProjectDBversion.plist

  Projects.DB

  resources - no idea what this? Photos here too

  Miniatures - what is - it used to? I had 16 points here, it should not match the masters?

  I'd love to get it back to scratch so any ideas and would love someone to answer some of the questions above

  You are chasing a dream - you may (0r can't) get the answers to all or part of these but he questions not because you can't fix anything and if you messes with the content library autour probably have corrupted you it

  I daresay I could have tinkered around with the "contents of the package.

  rather than wasting time on a quest usless you need

  1 resolve to stay out of the inside of the library in the future - there is not serviceable by the user

  2. now, either restore a working library from before you "tinkered" around

  3 - or start over with a new library, then drag each file in master file to the icon in the Dock to import into the new library of Photos

  LN

• Driveway and packages

  I have a MacPro of 2009. Recently, I changed all my records. The boot drive is now SSD. I downloaded a fresh copy of logic X on this drive and can't with her.

  First of all, enter car doesn't work simply. When I record select a track, I can see the counters are moving, but hear no sound through the canal. I have to click the Enter button to move audio via. He agrees that if the channel is logging on with the selected entry button, the channel should always pass the audio from the source during playback of the track, but it's not. This isn't the behavior that I'm used from logic after several years of use.

  Also, is there a way to get its default to saving in a folder rather than a package?

  Hello

  Chris Crabtree wrote:

  First of all, enter car doesn't work simply. When I record select a track, I can see the counters are moving, but hear no sound through the canal.

  Switch from Logic Pro X > Preferences > Audio > general

  Enable a software monitoring, disable the entry followed only for the track has worn and tracks active record

  Chris Crabtree wrote:

  Also, is there a way to get its default to saving in a folder rather than a package?

  Here, LPX "remembers" the last format selected, so if I save to a folder once, which will remain as the default.

  TDC

• External monitor works but integrated screen is not

  Hello

  I have a model of Macbook Pro 13 of the retina (mid-2013) .

  A few months back the display has stopped working, but when I hooked to an external monitor everything worked as expected except the screen of course.

  I took it to the service center and a descent computer repair shop and they both said that display connection with the logic board is fried and they need to fix the logic board that retina display is fine.

  The price they are quoting is about $ 900, which is not fair.

  The logic card cannot be repaired?

  anyone else in a similar situation?

  If all the otherwise failed I think I'll delete the entire display of macbook. Someone knows how to do this?

  Thank you!

  Welcome to the CSA!

  Because of the tiny parts and connections on a logic board, repair is usually not an option. I don't say it can't be done, but it's hard to find someone who can / will work on resolder delicate bits on a LB (redistribution) without making a mess of labor law.

  You live in the United States? If so, ask about a "repair." Instead of working on the computer in the Apple Store, they send to Apple rehabilitation center where they pretty much fix everything what they find wrong inside (with the exception of the display unit itself) for a flat rate that is much lower than the cost that you quoted for repair in the store. I believe that the current price for this service is approximately US$ 315.

  The only downside I see is that the repair takes about a week, largely during the transportation to and from the depot.

  If you are not in the United States, ask anyway. I don't know what Apple has implemented for this kind of repair outside the United States.

• I downloaded "A lot" to get a package of follow-up aid and now it is whenever I start Firefox - how do I remove it from my screen?

  I downloaded the 'many' monitoring program to track a package.
  I managed to remove the program, but there is still a page of advertising "A lot" that appears whenever I start Firefox. To access my main Roadrunner page, I click on a "Roadrunner" icon at the top left. I would go back for the Roadrunner homepage appear as soon as I click on Firefox to instead of having the advertising page 'A lot' appear. Any help in getting it removed would be appreciated.

  Please check that your settings-> https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page homepage