U16 anomaly of image in the container Image Imaq Vision

Similar Questions

• IMAQ Vision Image structure

  I currently grabbing an image, using my own equipment and windows messaging and do it in memory as a bitmap image.  How to copy this image in a structure Image IMAQ Vision.  I see other threads that the structure is the owner, but is it possible to copy the raw data in the structure of the Image.  The only way I can achieve this is to write in a BMP file, and then use the () imaqReadFile to read back in. It takes a lot of time, it would be much faster if I could copy from one location to another.

  You can use imaqArrayToImage(), but I've always found this difficult to use function.

  my favorite way is to create a new image of the right size using imaqCreateImage(), then get a pointer to the first pixel using imaqGetImageInfo() and fill pixels directly by copying the data in the buffer of the image. I already showed how to access pixels directly on this forum. You should pay attention to the size of your pixels and the format of the image (RGB, grey levels).

• Keep the container above the images (depth?)

  Hello, I have a container and some images. The images are added by the user - it can add as many images he wants at any time. When a new image is added to the container is no longer visible image is above it.

  How can I do to the container always exceeds the images? I thought that this could be the z axis, but when I changed its value there is no visible results.

  addChildAt(child,0) will add a child under any view of the existing objects. addChildAt (child, numChildren-2), it will add under the high display of the current page object.

• Slide show 100% width - Image to file at the top of the container for slide show

  I would use a slide show width 100%, in the image of tank in proportion and have the image itself axis to the top of the container, as it is resized. Currently, the behavior is that the image is resized the center of the culture of the top of my images. I would have rather high pin and let the low get cropped as increases the width of the browser.

  Any code Add ' l, I can add to make this happen?

  Thank you!

  Hi Josh,.

  Would not be possible in the slideshow, you can try using the composition where you can fill out the image in the target window and choose the placement of the image but the width of 100% is not available in the compositions.

  Kind regards

  Akshay

• How can I create a label twist wrapped around a cylindrical container of a square image, like the label of the container of pringles chips paper?

  Hello

  I'll make a new packaging for a product that my company will launch next month. The packaging is cylindrical and paper twisted and wrapped around a cylinder.

  I finished the label in Adobe Illustrator, and it's a square image. Now, I want to design the label in the form of torsion that hurts the cylindrical container like the label of the container of pringles chips paper.

  Please give me some advice or instructions that may help me to design the label my desired form. Thank you...

  Kaddour,

  You may be, based on the version cut showing a cup which begins and ends at the level of the corners (guides are your friends):

  Round 1) create the complete label goes all the way, in the form of basic rectangular/square (works both a rectangle and a square, this last just have the same width and height), with all the works of art;

  (2) to decide the number of cuts;

  (3) create an oblique path right from the upper left corner (you can use the line Segment tool) for somewhere farther to the right, and then with the reference Point in the range of transformation the left superior value changes the value of W to the total width of the rectangle divided by the number of cuts, this will give you the right angle;

  (Pass 4) a copy of the straight path of 2) to the right by its value of W;

  5. Select two straight paths of 3) and 4) and Ctrl / Cmd + J to join them so create a parallellogram with twice the value of 3 W) / 4);

  (6 moving copies of the parallellogram left and right by the W of the value of 3) / 4), repeat until you have covered the original rectangle.

  (7) let the parallellogram on the far left where it is (covering the left upper part of the original rectangle) and move the others down by the height (of the original rectangle / the parallellograms), leave one where it is and continue with the remaining until they are all under one of the other;

  (8) copies of the original rectangle of 1 move) downwards by its height until you have rectangles behind the parallellograms.

  (9) for each set of parallellogram and rectangle, select both and object > clipping mask > make.

  (10) select and group;

  Now you should have the final shape and look of the rectangle cut as a group of clipping masks, done digitally; You can use as it is to cut a single label, or you can:

  (((11) copies of shifting to the right by the W of the value of 3) / 4) to have multiple labels to cut.

  This obviously requires a fairly precise cut, but it may be less critical than usual, given the nature of the twisted label.

• Anomaly of image button

  The curious saga continues.

  Anomaly of today is the creation of a custom graphic button. Dutifully, I appointed the three button States more down and placed the PNG format in the gallery. I've done it before, no prob.

  When I try to apply the button image, the button does not matter in the pref list in the project; I can't simply apply the button image. The image of the button do not "open."

  No explanation, that I know and not something described previously according to search.

  What could I do it wrong?

  Duh. The name of the button too long.

• Place anomaly scale image

  A funny thing happened on my way to the theatre...

  A few days ago I placed an image in a file Illie, linked, scale 100%.

  This morning, I needed to edit the file in Photoshop. It was cropping a bit above the bottom of it, thus changing its dimensions.

  Just to check that everything was still OK at the end of Illie (because it is somehow, I figured that it wouldn't), I opened the file Illie.

  And here, everything was not okay. The placed image itself had intensified by somewhat % becomes too wide.

  Rather than tinkering with the scale, I placed the image again and he came to the right size.

  I noticed that exactly the same thing happens when I'm Illie open while I'm editing the image. Jumping image placed visibly when Illie shows the new size.

  Can someone tell me why this is and how Illie recognize the size of the placed images?

  It does calculate the area or what is happening?

  Here is an example I tried later, have not kept the original size:

  File original image 63.218 x 47.414 mm (placed in Illie at 100% scale)

  Cropped in PS to 63.218 x 44.027 mm

  Changes in Illie 64.846 x 45.161 mm (scale 102.576%)

  I can't make sense figures. Someone out there is better in mathematics that I am? (Of course it takes!)

  To correct the bounding box in your example, in the drop-down menu from the links Panel menu first select Image Embed and link it then.

  As he said John uses a container. It is for the Assembly reference and clipping if you select this option in the window Placement. In your example the container and processing including in form but they are not the same thing - the placement of fill option shows this. You can check that if you rotate the image in your example, then go to object > transform > reset Bounding box, then in the links Panel, open the investment options and try different options to see how the image changes its placement.

• I really want to get the IMAQ Image IMAQ Arry case to Image.vi files

  Hello!

  Although already, I installed LabVIEW8.2 and NOR-IMAQ, I don't have IMAQ Image cases and IMAQ Arry Image.vi files.

  To use the infrared camera, I need them.

  I really want to get the case Image IMAQ Arry Image.vi files IMAQ.

  How can I get these files?

  Please, let me know the methods.

  Sincerely!

  Thank you very much for your explanation.

  Solve the problem.

  Have a nice day ^ ^

• How an image IMAQ transformed into table, divide it into two parts and show them as IMAQ image after?

  Hello

  I currently use the vi IMAQ to get a real-time picture out a camera with 1024 * 1024 pixels.

  What I try to do is:

  (1) get the image IMAQ (OK)

  (2) put it in Array (OK)

  (3) get 2 smaller bays, each containing half the lines, a high-ranking, the other a low ranks (not OK)

  (4) do some calculations with these tables (come / divide them) (not OK)

  (5) display the resulting table of calculations as a map pixels like the first image IMAQ XY, I had (not OK)

  Could you please guide in the resolution of the present? I'm confused litle...

  (Step 3), I realized that the use of the VI "remove table" could be good, but I do not understand how to select half of the lines (high or low)

  (Step 4), I think I won't have any problem to do.

  Step 5) this one I'm lost, I can only trace some waveform, but never a card-pixel XY as the IMAQ

  Thak you!

  I think it is just a reference to the image (that is, as passing in a blank canvas). For example, I think you could re - use your image IMAQ coming - you might like it for reasons of performance, or because she puts up things like the size of the image / canvas. It is not very well explained in the documentation, but if you look at a few examples IMAQ integrated, it might be useful.

• Determine the size of the container when using SizeUnit.PERCENT

  Hello

  How can I determine the width and height of a container, when I use the percentage of the size of the container?

  I have the following code, but this.width and this.height are both 0, causing the background sprite is not to demonstrate:

     public class HeaderContainer extends Container
      {
          private var _imgCategory:Image = new Image();
          private var _lblTitle:Label = new Label();
          private var _matrix:Matrix = new Matrix();
          private var _sprBackgroundColor:Sprite = new Sprite();
          private var _tfmtTitle:TextFormat = new TextFormat();
  
          public function HeaderContainer()
          {
              margins = Vector.([5,5,5,5]);
              debugColor = 0xCCCCCC; // grey
              flow = ContainerFlow.HORIZONTAL;
              align = ContainerAlign.NEAR;
              size = MyConstants.HEADER_SIZE;
              sizeUnit = SizeUnit.PERCENT;
              initializeUI();
          }
  
          public function initializeUI() : void
          {
              with (_sprBackgroundColor)
              {
                  x = y = 0;
                  graphics.beginFill(0x0000FF, 1);
                  graphics.drawRect(0, 0, this.width, this.height);
                  graphics.endFill();
              }
              ...
          }
  

  Have you tried to call the initializeUI method after the container has been added to the scene? You can easily register a handler to do this.

• Width of the container compared to the width of the banner graphic

  Uses DW CS5.5.  I have a 955 px wide container.  Within this container, I placed three such different DIV as defined using CSS: .banner (who is 955 px wide and spans all the top of the container, then two DIVS below, named .column_left and .column_right.

  I have a graph that is 955 px wide that I will place in .banner DIV at the top of the page.  The width of the graph, the DIV .banner width and width DIV container are all defined with the value 955 px wide, would this cause problems?  What is the 'best practices' for this?  The graphics are slightly less 955 px to ensure that it is not overflowing the container?  The .banner DIV must also be less than the width of the container to avoid problems related to the overflows?  Just try to be less confused regarding my initial design of the model I am formatted.

  It is the first of the two questions today, with that I need to get help.  The other is to use the background image in the container, which I will ask separately.  TKS.

  Any element that you insert as a div is positioned just after the chart because it is space available depending in the natural HTML flow, unless the image is launched which will remove the natural flow of html.

  I try as much as possible use of divs as possible that does not always work because l become lazy and start to insert some divs more than what is strictly all because there is a natural tendency to think that each element is in its own division sometimes there is place to be, but very often there is no good reason It's just down to sloppy coding.

  If it of just a unique banner image and is not part of a slide show, it is probably not a reason why it should be in its own div.

  The divs create you a more difficult page becomes to maintain when you return after a few months of update of content.

• I hurt in Dreamweaver cm³ 2015 - in the liquid in the container, it is not all - help!

  I'm building my first site for CS5 and a lot has changed... mainly reagents necessary actions. I built a home page using the container of liquid and by inserting sensitive images by using the start menu. When I take it up to the size of the Tablet and mobile, I find myself with a mess. Can someone help me?

  Work with the Legacy fluid grid layouts?

  If so, it seems you could make it back. LFGLs require you to start with the mobile version of the site and work your way upward through Tablet and desktop computer.

  The mobile css is actually global styles used by all 3 series, or crushed by the two series later (Tablet and desktop). Tablet replaced the (global) mobile and desktop replaced both.

  If you start the office and try to work down, things will be continuously break and drive you up the wall.

• Make fixed scrolling bg relevent to the container div not viewport

  Hi, I'm experimenting with a design reagent and css etc. Im having a problem with something.

  I am just to test the bg images and put an image as a bg for a div when the option scroll centres nicely and is relative to the container DIV. If, however, I got it fixed, then it becomes from the window, which means that when you scroll to the top he chops of the upper part of the image turned off. Y at - it a way with css to stop what is happening.

  #contentright {(width: 25 %; background-image: url(/images/neilquote.gif);}

  background-repeat: no-repeat;

  background-attachment: fixed;

  background-position: 100% 50%;

  padding-top: 10px;

  float: left;

  }

  http://www.stuartskelton.co.UK

  His image on the right side.

  Its not even something I really need but is now listening the hell out of me.

  Thanks for the research.

  Change this:

  #contentright {(width: 25 %; background-image: url(/images/neilquote.gif);}

  background-repeat: no-repeat;

  background-attachment: fixed;

  background-position: 100% 50%;

  padding-top: 10px;

  float: left;

  }

  to do this:

  {#contentright}

  Width: 25%;

  ("background: url("/images/neilquote.gif ") non-repetition fixed straight transparent 170px;

  padding-top: 10px;

  float: left;

  }

  We will assign a fixed position, no repetition in bg, horizontal right of div and 170px vertically from the top of the div to fill the space above this div (header area).

• Adaptive layout of loading in the container (from Simon Widjaja tutorial)

  Hello

  I worked on a tutorial teaching Flexible Layouts, by Simon Widjaja.

  DGE-animate-and-the-edge-Commons-Library/ http://TV.adobe.com/watch/Create-Like-Crazy-with-Adobe-Edge/flexible-layouts-using-Adobe-e

  Its really a good tutorial. The reactive part is pretty basic, but for the adaptation of the part Im having problems, we load the code from github.

  I created the Adaptive symbols and copied all the code.

  IM asked to create a div container. It's simply a true rectangle? with a code.

  When I saw it, the only thing I see is the container (the rectangle).

  I don't know if people have done this, if someone might know what could be the problem?

  I have my file here:

  https://DL.dropbox.com/u/2093612/flexible.zip

  Thank you very much

  Hello

  Your images are not loaded. Why? Capitalization.

  You named your rectangle: "hasdaptativeContainer".

  You called (creationComplete and window.resize) from: adapativeContainer.

  Therefore, change your "A".

  You use: EdgeCommons-0. 6. 0.js

  It returns errors.

  EdgeCommons-0. 4. 0.js does not return an error.

  EdgeCommons 0.4.0: download the example files.

• Why can't I paste HTML into the container target widget?

  I can't paste the code in the container HTML target lightbox widget. After ensuring that I chose the image frame, I delete the placeholder image (ribbed sheet) by pressing DELETE (Mac).  I have to reselect the container internal and choose object > insert HTML but he always puts out the widget! I managed it in the past, but with the latest version it is impossible. It's driving me crazy!

  Once the HTML object is inserted in the page, you can drag it into the target.