U160 - fresh WIN7 install

Similar Questions

• Edge 14 - drivers WiFi on a fresh Win7 install

  Hi-

  I recently formatted my hard drive and put my own copy of Win7 on my Thinkpad Edge 14 (0579-A62). There is no recovery partition more. After being surprised that Win7 was no driver integrated for display or WiFi, I plugged in an ethernet cable and went on the Lenovo support site. I tried all the networking: WLAN drivers, but none of them leave work wireless. I installed the Intel PROSet software and it just says: "the driver is not installed" so I guess that it has nothing to do with the WiFi key on the keyboard. Any ideas?

  Thanks for your help RedEd12, but I had to go a different route to resolve this.

  I went to Device Manager, went to properties for the uneven device and looked at the Vendor ID and the device ID and the google channel.  I discovered that the wireless network adapter is a Realtek RTL8188CE which is NOT one of the factors listed on networking: WLAN section on the page of the driver of Lenovo.

  I got the drivers here: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&ProdI... (Do a search for "8188CE").

  Shame on you, Lenovo. I lost $13 on a USB Wireless Adapter earlier today before I understood that.

• Computer can't find D: / /, load win7 install disk, but he finds no problem

  Computer can't find D: / /, load win7 install disk, but he finds no problem

  TuneUp utilities reports
  Statements from Windows that device "TSSTcorp CD/DVGW SH-S182F ATA Device" does not work properly.

  Device Manager reports
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Windows Update driver reports
  Windows has determined the driver for your device is up-to-date

  Downloaded 3 replacing driver software, none of them reports a problem with the driver

  Thought I could reinstall win7 but if it does not reinstall the driver faulty, I won't be able to install the player software

  All help get will be appreciated

  Why would install you software on your D drive or partition?

  Any program .exe must be installed where the operating system is which is the conventional way and supported way :)

  Personal folders may be located on other partitions, but programs are better installed where the operating system.

• Why used win7 install motorola peripheral PSG to interface

  Why used win7 install MTP ive installed motorola mobile Motorola phone drivers device interface but victory moved the interface of the MTP driver

  Hello

  Check out the link and follow the steps.

  http://www.Motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD

  You can also try by selecting the device failed in Device Manager and manually install the driver by selecting the device as a storage device USB mass and not to the default instrument of PSG.

• USB3 Driver install fails after installing fresh Win7

  Today, I did a full 64 fresh install of Windows 7 (using supplied Alienware DVD) of my Alienware Laptop M17xR3.  After finished with updates installed so Win7 Windows7, I went to the web page of Dell Alienware and installed all the recommended drivers.

  In my device manager, all components of the system have been scanned and work well except one... my USB controller under other.  Its my USB 3.0

  I tried to install this driver recommended several times following...

  NEC USB 3.0, v.2.0.26.0, A00see details
  R289408.exe

  The installation fails every time saying: error - 2: the system cannot find the specified file.

  Here's a screenshot:

  

  My serial number is CW2B5Q1

  

  It is probably just a standard set of drivers NEC and Renesas. Have you tried to manually unzip archive and look inside or run from there?

  Have you tried letting Windows load a Windows-Update driver?

• Fresh win10 install a Studio XPS 7100.

  You will need to do a fresh install of Win 10 for one SSD on a Studio XPS 7100 with HDD doubtful.  If cloning will not work.   Backup media is 5 years old, so I prefer to do a new installation

  I did the upgrade of Win10, worked after trying 4, 2 failure dodgy hard drive, used Window Media Creator to get an upgrade to work.

  Win10 actually cleared up some locking problems I had on Win7

  I used Windows Media creator for trying to install fresh on the SSD, but no operating system found after the attempt.

  What do I need to reinstall Dell software to make it work?   What are the steps for a new installation.  Links or information

  Thanks for any direction you can give me.

  If you have successfully activate Windows 10 previously. Follow the instructions here to download the .iso image file:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  Then follow the instructions here to install from the .iso image file:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-10/Windows-10-clean-reinstallation-via-bootable-USB-from-ISO/

• HP Pavilion DM1: Pavilion DM1 * clean * Win7 install... no COA sticker?

  My wife has an HP Pavilion DM1 is a slug running and I want to do a clean install of Win7 without all the bloatware that is come upon her, but realized that this little book is not a Microsoft COA top sticker to do the reinstall.  HP did ship of this machine without an activation code Win7 on it?  If Yes, is there a way I can get the code to make a * clean * install or should I just use the system recovery disk to go back to the factory?  I have a few old machines COA stickers, but did not burn one if I had to.  Any help/info is appreciated.

  You are the very welcome.

  The recovery disks should be pre-activated and there should be no need to enter a product key.

  But you will need to uninstall the bloatware that will be reinstalled, unless your recovery disks for a reduced recovery.

• Satellite C670D - cannot install the ATI driver on Win7 installed costs

  I have a C670D and cams with Win7 Home Prem
  I have Win7 Enterprise edition and installed.

  It looks good, but the dosn´t graphics work. I have try´d the pilot in the Support section, but they didn t work.
  The site of ATI theres no driver for it.

  Maybe I just need a driver of the APU, but I can't find anything.
  Maybe someone here can help.

  Hello

  What Satellite C670D-xxx you have exactly?
  Do you have an error during the installation of the driver?
  Have you installed a Win 7 Enterprise 32 bit OS?
  The European driver Toshiba page provides only a display driver ATI for Win 7 64 bit system.

  More information would be really appreciated!

• win7 install on the laptop CL 2023 g7

  I did a fresh install of Windows 7on model Pavilion g7 2023cl (after repartitioning the HD and formatting).  The base OS installed OK, but no drivers for the PCI bus, bus SM, peripheral USB, etc. were installed.  The download page for the driver for this laptop in particular has drivers for display, etc., but nothing for the chipset (driver download other pages have chipset drivers available).  What must be installed to get the basic features recognized?

  You are the very welcome.

  You need this driver for the wired NIC - a second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  For the wireless, do like this...

  Go to Device Manager and click on the network controller device.

  At the top of the network controller window, click the Details tab.

  Now, you see a Description of the list system default list drop-down property.

  Drop down on it and select the second element (Hardware ID).

  Now, you see 3-4 lines of characters, the upper line starting with PCI\VEN.

  After this first line of characters.

• Satellite L450 - 18K - Win7 install failed because of lack of CD-ROM drive

  I want to install Win 7 on my laptop Satellite L450 - 18K. The laptop boot from the CDROM. I get the start installation window. When I press 'Install now' I get the message error "CD-ROM driver is missing.

  I can't find a CD-ROM driver on the Toshiba homepage.

  How can I install WIN 7 cost?

  Thank you in advance for your help!

  You try to start the installation while the OS is running or what?
  And what happens when you start with the installation disc?
  You want to install Windows update or do the new install of Win7?

• x 220 mSata SSD OCZ Nocti Win7 install fails

  Hello guys,.

  Today, I installed a new Nocti of OCZ 60 GB SSD in my x 220 msata location. at the same time, I got a hitachi 320 GB 7200 RPM lenovo stock disc.

  the ssd is perfectly recognized by the bios. I use version 1.22.

  now, I want to install win7 on my ssd, which has already been installed on my hard drive.

  I put my copy of win7 on a USB key, it starts, select windows install.

  However, arriving at the screen "Select the driver to install.", I get an error thrown to me:

  "A required CD/DVD drive decive driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I have not driver on my hd/ssd and States of Web site of ocz which a) none is needed, and b) that none is provided.

  I tried to install without having the hd attached, the same error.

  Any of you guys have ideas on how to possibly solve the problem?

  See you soon!

  for one, I have not use this ssd in a laptop.
  It's a terrible sandforce laptop.
  You must use one of the intel ready models boot much better power profile.
  more sandforce tell it different not good for the laptop.

  What is a clone?
  you did, or a copy of win 7 with the windows 7 usb tool.

  You must use a very important 4 GB model or bios does not have a usb of larger size.
  more little won't hold win7.
  You must convert an iso, then make the USB bootable and had not accused the file system on the key.
  I use a special wrench just to install win 7 only.

  in the bios, you can select the USB as a boot first or 2nd order.
  2nd, so you must press the start command menu to select a boot device.
  you not on port 0 is your right to Board, you will need to select the first boot to usb in this menu.
  Make sure also that in bios flat disk of port 0 is not stopped the ist and the msata is moved to the top online.

  some easy ways could be pulling the 2.5 and then he select auto.
  You must specify the pc what you're doing.
  you don a thing out of use and who does not go to port 0 but a new port for the reader.

  If you select usb in the bios the first order when you reboot your system with the installation it will reinstall in a loop that why tyou select not this first, but use the menu screen. F9 or something depoends on the pc manufacturer.
  If you fall into a traction of the loop, the main cause of the image is already there so next restart windows by default to the disk image and complete the installation.

  I know a lot of info here but win 7 can be easy to install or hard depending on if you have it down pat.
  I did over 100 installs so I know everything inside and out and even I forgot to do something from time to time.

  Check again it is a good image on the button who made the right size in the right way and he fully bootable (huge deal - bootable)).
  Select the msata as the new boot ist or 2nd as rom is foirst for most.
  the old disk is 2nd.
  PROMT you F to select the USB drive as the new boot device.
  is nothing another pluged and do not use the combined port but I did lol he worked or sata port 3.

  ALSO - it's a big deal make sure that usb get you is a start control device which means power immediately.
  normally we lone usb on most laptops.
  Some will not be powered until this that completely initialized, this means no power when first restart.
  Commen problem on mobile phones when we have the beta version of windows on the USB.
  Some phones only maintain a usb on the first step.

  look at the light of thumb it will show if cela a port not starting.

• C6280 with duplex, win7, installed package complete aio and 2 updates. lack of duplex

  C6280 is directly you connect to the router. This has never worked on my lenevo G530 wireless connect to the router. However the installation on my duplex Tower is ok. the tower is dell with win7 pro direct connect to the router. Help

  Hello
  Make sure that the automatic duplex printing option is selected:
  
  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.
  
  Automatic duplex printing should now available.
  
  Kind regards
  Shlomi

• Win7, installed on the RAID1 does not work Windows Update and messneger (SID problem)?

  Hi, first of all the machine description

  OS: Win7 Pro 64 bit Original and new
  MB: ASUS P7H57D-V EVO
  Processor: Intel Core i7 860
  RAM: 4 x 2 GB Corsair XMS3 CMX4GX3M2A1600C9
  Graphics: Ati Radeon HD5670
  HARD drive: 2 x WD GP 1 TB - 1 x Seagate 1 TB

  Problem: a bit long to explain...
  I first tried to install the OS on a RAID1, so initially I set raid in the bios with the 2 WD1Tb, then I created the table and I started the installation.
  WIN DVD it recognises the table, it starts installing, it made the first reboot, when is close to finishing it gives an error that cannot complete the installation. I spent 10 days trying to solve the problem without result.
  So I decided to work around the problem, I installed the operating system on a single hard drive, then I cloned the HDD for the RAID1.
  Everything seems to go well but... Update Windows and MSN Messenger will not connect, as having a problem of equality SID.
  If I clone the installation of work, everything works on a different disk included WIN UPDATE and Messenger.
  Cloned on the table, right.
  The table is correctly recognized by WIN7, I downloaded the latest drivers from the Asus MB site, but the problem remains

  What can I try?

  Thank you to everyone

  If 'update of Windows and MSN Messenger' [AKA Windows Live Messenger] are not connected, the chances are it is a network problem. And then...

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. If Win7 64 bits is pre-installed on the computer when you bought it, a free trial Norton or McAfee came preinstalled, too? (No matter if you have never used or activated).

  =======================================

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

  How TO activate the automatic update enabled or disabled
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates (Vista & Win7).

• Defragmentation after fresh re - install

  I just did a reinstall fresh Windows XP, Office 2003, all service packs and updates. Then download and install lastes versions of essential programs such as adobe software, Java, Flash, Quicktime and security. Then the settings imported and set up Outlook. I thought that I should defragment the hard drive at this point (before you install all my other 3rd party programs and all my backup files) so that the Windows operating system would occur at the optimal level. However, when I run the analyzer tool he says have not defragment now. Should I still defragment now or is better to leave it alone and install all my backup files and 3 third party programs. Wait while the analyzer tool reports the need to defragment.

  I look forward to the notice of hearing thereon. Thank you!

  The whole issue of defragmentation is still somewhat controversial. Many people believe that it is a valuable tool and to often do to improve performance.

  On the other side are those who believe that the defragmentation is not only unnecessary, but actually shorten the life of a hard drive.

  In the bad old days of FAT and Windows 3.x files got quickly fragmented and with the speed of hard drives, this caused a significant deterioration of the recovery of files, thereby slowing down the performance of the system. Frequent defragmentation was required. With the arrival of NTFS, file, however, the file system has become much more resistant to fragmentation. This reduces the need to defragment often. With the fragmentation of the speed of modern readers, the impact of (and need) has been reduced substantially.

  As John John has pointed out, it does no harm to defragment. I count not on Windows assessment to judge whether to defragment or not. If it has been awhile, go ahead. In your case, it is not a bad thing to do.

  I actually use a program called Diskeeper that automatically detects and prevents the fragmentation and also will be defrag if it detects that it is necessary and it makes when there is no demand on the processor or hard drive. Do a good job? You bet. It's so transparent that you are not yet aware unless you check the Task Manager. Is this necessary? It is open to debate. I love it and use it.
  Kind regards
  Hank Arnold
  Microsoft MVP
  Windows Server - Directory Services
  http://it.Toolbox.com/blogs/personal-PC-Assistant/

  18/09/2010 21:17, sjeb wrote:

  I just did a reinstall fresh Windows XP, Office 2003, all service packs and updates. Then download and install lastes versions of essential programs such as adobe software, Java, Flash, Quicktime and security. Then the settings imported and set up Outlook. I thought that I should defragment the hard drive at this point (before you install all my other 3rd party programs and all my backup files) so that the Windows operating system would occur at the optimal level. However, when I run the analyzer tool he says have not defragment now. Should I still defragment now or is better to leave it alone and install all my backup files and 3 third party programs. Wait while the analyzer tool reports the need to defragment.

  I look forward to the notice of hearing thereon. Thank you!

  Best regards, Hank Arnold (MVP - DS)

• Laptop delivered x 64 Vista, but x 86 installed Win7 - install 64-bit drivers or 32-bit?

  My Presario F572US delivered as a 64-bit with Windows Vista installed.  I upgraded the RAM to 2 GB and installed Windows 7 Home Premium 32-bit.

  If I understand correctly, install the 32-bit operating system on the computer portable 64-bit is OK, but should the drivers I have installed (Win7 compatible, updates, new devices or software, etc.), when a choice must be made, be 64 bit or 32 bit versions?

  Hello:

  You must install drivers 32 bits on 32-bit and 64-bit drivers on a 64 bit OS.

  64-bit drivers won't go even after the initial pilot run line on a 32-bit system, so you cannot install them even if you wanted to.

  IMO, you have made a wise decision, installation of an OS 32-bit on a PC with only 2 GB of memory.

  A 64 bit OS requires more memory space and the drive to run a 32 bit OS. Not double, but more.

  I would never install an OS 64-bit on any PC with less than 4 GB of memory.

  Paul