U2410 and MacBook Pro - monitor is just a mismatch?

Similar Questions

• LoJack - how to allow LoJack to see my MacBook and MacBook Pro in Guest Mode

  THIS IS in MY OSX 10.7.5 and 10.11.5 REGUERDS.

  There, everyone using a guest account with LoJack installed on their MacBook and MacBook Pro?

  Well, I do, then how do all of my accounts of my Macs to users COMMENTS to have 100% full access to Absolute Software for Mac can be seen through their software LoJack that I use in the Admin account?

  LoJack share with the guest account?  If so, how?

  LoJack uses IP addresses to locate my articles, and somehow, even if the Guest user has 100% access to the Internet (with an official IP address), LoJack do not see through intellectual property - he sees her where he was before--way out there across town.

  I tried several times on BOTH of my Macs and LoJack does not see either Mac when I was logged in the comments my account - at this current location - 30 hours.

  But when logged in to my Admin account - she sees him like a charm!

  Using a double NAT configuration? That might explain things.

  When you use the network of comments he is given a completely different IP range and if you double NAT that can cause serious problems.

• Before you synchronize my iMac and Macbook Pro, in my menu bookmarks, all my favorites were colored icons - now they have disappeared - how to bring them back?

  Before you synchronize my iMac and MacBook Pro, in my Bookmarks Menu dΘroulant, all my favorites were colored icons - now they have disappeared - how to bring them back?

  It seemed to work on my FF 9.0.1 and Lion Mac. When I tried to set this parameter on FF 8.0.1 was ALREADY set to "FALSE". Must be something else?

• MacBook Air and Macbook Pro for a country with a moderate speed internet

  Hello.

  Please can anyone provide me suggestions on what kind of Macbook (preferably between the Macbook Air and Macbook Pro) to buy? I will be moving to Nigeria and will love a stylish laptop that I can use when there is a poor network.

  Thank you.

  The two manage networks in the same way... slow food makes slow refresh, fast food done fast refresh.

  My concern would be supported in Nigeria.  New units of the retina are sealed and cannot be repaired easily, and if you perform self-service you cancel the warranty Apple Stores years FSAA (Apple authorized service providers) are your best source of support.

  Keep several good backups in case of failure, as although Macs are reliable, the bad parts pass through.  There are also thieves in all regions of the world who love bright shiny Macs.

• iMAC and MACBOOK Pro user.  CC for member photographers.  the iMAC in Photoshop CC2015 and LR upgrade went well.  Update of the MacBook is showing that trial versions, not permanent.  How can I fix it?

  iMAC and MACBOOK Pro user.  CC for member photographers.  the iMAC in Photoshop CC2015 and LR upgrade went well.  Update of the MacBook is showing that trial versions, not permanent.  How can I fix it?

  Go to Adobe Creative Cloud

  Hello

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• I have a MacBook Pro, beginning 2011, just upgraded to 8 Ram and have the storage capacity of 500 GB.  I need more storage for photos.  How much more can my grip of Mac, and it makes sense to add a computer that old?

  I'm trying to decided if I should try to add more storage to my lap top existing, or buy a new one with more memory.  I am a Photogaphy and need a lot of storage.  I have a MacBook Pro, in early 2011, just upgraded to 8 GB of Ram so I could upgrade to OSX E Capitan and add new software. I have 500 GB storage now and need a lot more. Would love 2 TB or more.

  What is the maximum I can add to my laptop? And does make sense to do?

  On the largest practical size warehouse readers coming always internally are about 1, 000 GB.

  To go more than you would have to decide if the portability was an important issue, because additional disks should probably be external. The Mac can support dozens of external hard drives. If you do not carry them, 'office' readers are faster and can be found in larger sizes. Their PIN 12-volt Motors require a lot more power that can be provided using Bus power, while they use their own power supplies.

• New iMac and Macbook Pro to run Snow Leopard?

  Hello, I just record music using Garageband that runs on Snow Leopard. My old 2008 iMac is dying and I need to know: what is the newest iMac or Macbook Pro which will be held in Snow Leopard? Thank you!

  Click here and check; Moreover, any Intel Mac can run Mac OS X Server 10.6 within an emulator such as VirtualBox.

  (143883)

• New Office 2011 & Webroot Desktop iMac and MacBook Pro

  OK, we have a macbook pro that we run MicrosoftOffice 2011.

  We have now bought an iMac of office.  We cannot add our 2011 buy microsoft office version for the iMac (only good for a laptop or personal computer).  I need something like office 2011 for the new office.

  I know there was a lot of changes there on the software on what we can and can't do...

  What are the best options for going forward so I can get microsoft office 2011 or something like that, for the new office.

  Also the store 'gave us"webroot and said we really, really need to have that on our desk.  I am not of this opinion.  Does anyone else have an opinion?

  Whatever your question has to do with Boot Camp?

  If you have Office for Mac questions you can ask your question in the Office for Mac forums where the Office of the Mac gurus hang out.

  If you have an iMac problem you could try asking the community of iMac located here: iMac

  If you are looking for just an Office program, you can try LibreOffice.

  You don't need or want all third-party antivirus or programs of 'cleaning up' on your Apple computer.

• WRT310N v1 and MacBook Pro wireless questions

  Hi all

  I had problems with my v1 WRT310N current wireless. I have a macbook pro (early 2009) with mac os 10.5.8. I have cable internet, a DHCP connection. I have a computer and cable to the PS3 via the router, and they work perfectly. The wireless, has however never been what it should be. Internet load slow, even if the connection speed is quite good (not as fast as the devices wired, but close).

  Wireless settings are:

  wireless configuration: manual

  network mode: mixed (the Macbook can get wireless n by iPhone is just g)

  Radio band: standard 20 mhZ

  broad channel: 9 (cannot change this with this config, if I'm not wide channel at 40 mhZ)

  standard channel: 11

  SSID broadcast: enabled

  I've got security WPA2 with AES encryption. I defined the interval of tag to 75 and thresholds of Fragmentation and RTS on the left by default. The firewall is turned on, and "filter anonymous internet requests" is disabled. I wonder if I'm losing ground so by broadcasting a mixed signal, instead of just G or just N I tried to pass only Wireless-n, but there is no significant change (and the iPhone cannot connect at all).

  Any input at all would be really appreciated. I hope that I don't have to fork over $30 for linksys just to get technical support. Thanks in advance.

  AH! Finally got the bandwidth wireless at the height. The solution was, of course, the simplest available: move the router to a better location. Before that I had hidden in a corner near a window - probably sent most of the signal across the street. He now has a line of sight clear to each room. Assume that Occam's Razor is famous for a reason.

  Thanks for the help!

• Print via Wi - Fi on Photosmart Premium C309 connection problem on an iMac and MacBook Pro

  Hi all

  I just bought and installed a Photosmart Premium C309.

  I am running the latest Mac OS 10.6.5 on two computers: an IMac and a MacBook Pro.

  The printer software installation went well and I was able to print via USB cable.

  Then I connected the printer to my wireless network (Modem-Router: Fritz!) Box Fon WLAN), again without problems.

  I printed out a page of the control panel the printer network Test and got "no problems found. Congratulations on the successful your printer wireless installation.

  But when I tried to print via the wireless network, I continued to get "printer offline".

  I have disabled the firewall on the computer but no joy.

  Now, I'm unable to print via the USB port that the printer is "offline".

  Help!

  Thank you

  Problem solved! It has to do with Hello.

  When you set up the printer with the HP installation wizard must install the Hello printer drivers when you are prompted to choose the drivers. Simple.

  Thank you.

• PremierePro CC 2014 crashes 'Impossible to find capable games modules. Latest Mac Pro and MacBook Pro

  I get this message that you try to start the application on my MacPro 6.1, but there is no update for the display drivers that I can find.  They are AMD over-pants D700. It breaks down just on start up on my MacBook Pro late 2013.  Both have all updates.   Any ideas?

  Hello

  Please go to the following location to move the Adobe folder on the desktop,

  User library > Application support >

  User library > preferences >

  Make sure that you are in the library user not in the library system.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Please rename the Adobe folder in the documents to old.adobe

  Now try and launch.

  Hope that helps.

• 5.4 Lightroom on iMac and MacBook Pro

  I have been using Lightroom on my iMac (OS X 10.7.5) with an external 4 TB drive plugged with my Lightroom Catalog and pictures stored on it. I just bought a MacBook Pro (OS X 10.9.2) and loaded my second copy of Lightroom on it.

  I want to use my MacBook Pro when I travel to download the RAW files, edit and post pictures online etc. I don't have access to my catalog any when they travel. On my return, I want to have all my edited photos on my home iMac. They need not be kept on the laptop after that.

  My external hard drive is too big to travel with (heavier than the laptop), but I have a smaller, that I can use for the trip. I wanted to just keep a catalog at home, but not sure of the most effective way to achieve. Any help appreciated gratefully.

  You can export your images on the MBP of catalogue (file > Export catalogue) and import the catalog into your catalog master iMac. File > import from another catalog.

• New user with the iMac and MacBook Pro...

  I just ordered Lightroom 3, and while I'm waiting for delivery, I did the research so that I set up correctly from the start.  My husband and I are amateur photographers, not professionals.  So, we have a lot of pictures, but not thousands.  I take most of the photos.  I do not use RAW, but sometimes my husband does.  We use Photoshop Elements 8 to edition and iPhoto to produce books, export to our iPad, etc..  We have 2 computers... an iMac and a MacBook Pro.   All the reading I've done, I think I should install the Lightroom Catalog to the shared drive on our iMac.  All photos that we can live on this share drive (when importing we can mark with our own name so that we can each make a collection of our own photos).  As I understand it, each of us could use our own space on the iMac's Lightroom to access this library shared, to make our own edits, etc.

  First question... is what I said above correct and it seems like the best way to organize?

  Second question... it is now quite easy to access my files from my MacBook on our home network bridge.  It will be easy to access files via Lightroom when they live on the iMac but I want to use the MacBook instead?

  No help to you all, experts out there would be greatly appreciated!

  Thank you, Cindy

  Well, wireless will be /technically/ work. Because the wireless network connection simply provides a conduit through which is an extra layer of stuff system of sent files (probably AFP or SMBFS or something) for you give access to remote files and directories, you can see the performance is not acceptable.

  Some people report performance ok with remote catalogues and managed files, but many have catalog locally, with the managed pictures on drive accessible via a protocol of remote files.  Despite this, I suspect that some of these people are connected via gigabit ethernet.

  You will find that the network connection or the remote file system protocol may bring slow unreasonable things.

  Another restriction is that, under the right circumstances, Lr will change behavior to prevent you from using it in network. I forgot the exact circumstances in which this happens (I think it was reported that in other threads). I remember that it is limited to the import dialog. It will probably cause problems for you since the paths you use will probably be impossible to distinguish from local paths, but I wanted to mention it just in case.

• Sierra and MacBook Pro

  Sierra runs very slowly in my MacBook Pro. All applications take a long time to open.

  A few simple things first:

  -clear the NVRAM (now restart until you hear the chime a couple of times, and then release the command-option-P-R keys)

  -reset the SMC

  -start in Safe Mode and start again normally

  If this doesn't produce any improvement, download and run Etrecheck and post the report here.

  Most often, the problem is a software conflict caused by programs that were not updated to run in the current version, or by the user who installed an antivirus or "cleaners" that cause all sorts of problems.

  The report will let us know what software is running and should give a clue as to what is the cause of the slowness.

• Bluetooth connection between iPhone 6 and MacBook Pro (mid-2014)

  I'm trying to connect my iPhone to my MacBook Pro 6 so that I can use the universal Clipboard function in the Sierra. Both devices are updated, software-wise, and both devices meet the requirements of continuity system.

  When the settings bluetooth for the MacBook, I see my iPhone listed as a discoverable device.  When I click on the "even" button, the numeric code appears, followed by the notification on my iPhone to confirm the code. As soon as I confirm it, the screen bluetooth on my MacBook poster that my phone is connected for a few seconds then disconnects.  After that, my phone will say that the device, that I am trying to connect is out of reach, even if both devices are currently sitting side by side on my coffee table.

  It could very well be a simple solution to what I forget quite simply, if I appreciate any help that can be provided.

  

  Hi olly739,

  I understand that you do not want to use the universal Clipboard with your iPhone and your Mac. If both of your devices meets the hardware requirements so the following configuration requirements, you are ready to use the universal Clipboard (no necessary Bluetooth pairing).

  • Each device is connected to iCloud with the same Apple ID.
  • Each device has two turned on Bluetooth.
  • Each device has Wi - Fi enabled.

  Steps to follow for the universal use of Clipboard:

  1. On a single device, copy the text, image or video as you normally would. This content is added automatically to the Clipboard of your other device nearby. She stayed briefly, or until replace you it by copying something on each device.
  2. On the other device, paste the content as you normally would.

  Continuity of use to connect your Mac, iPhone, iPad, iPod touch and Apple Watch
  https://support.Apple.com/en-us/HT204681

  Sincerely.