U2415, a VGA and DVI video card?

Hello

We recently bought 4 u2415 dell screens for our company's graphic design team, I am a manger IT to my company, but the screen was not given by me and we encountered a problem linking them. The video card has only 1 single VGA port and a DVI port and because of this, I bought several adapters and cables to try to connect these monitors but I still can't get no signal, please help, I'm a little before I sent monitors to the advertiser. For VGA, I bought an active adapter convert it that HDMI port, I connect via dp to hdmi cable and get still no signal. For DVI, I bought a dp cable dvi and im still getting no signal. Please tell me what is wrong and if have a little chance to connect these monitors today before im refer to them.

The cables you bought are designed to go to DP to HDMI or DVI monitor video card. You can't go back.

The U2415 of the maximum resolution is 1920 x 1200 60Hz.So forget using the U2415 DP or CDM. The cheapest solution is this =
Computer video card DVI out-->--> U2415 HDMI DVI to HDMI Cable to

Tags: Dell Peripherals

Similar Questions

  • I tried to connect by Satellite to TV VGA and S-video help

    Hello

    I have Toshiba Satellite and I am trying to connect with the TV using S-video and VGA but not off them worked. It s deflected on television at the start of the laptop but not showing TV out on laptop when you press FN + F5 to switch. Coming to the settings display, attached box 2 after withdrawal of box 2 settings.
    Can you please help me?

    Thank you.
    Vinod

    Hello

    What laptop do you have exactly and how connect you to the TV?
    Did you use a VGA adapter S-video?
    If I understand the laptop supports only VGA and s-video TV port only.
    Is this good?

  • SR2180NX adding memory and a video card, how?

    I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
    I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.

    * Manufacturer * Compaq Presario
    * Product * RK548AA-ABA SR2180NX
    Total number of logical CPUS * 2
    Total physical memory * 1.00 GB
    Total number of optical drives * 1
    Total number of disks hard * 1
    Total number of video cards * 1

    * Memory *.
    ------------------------------------------------------------------------------
    * System memory * total physical memory * 1.00 GB
    * Free physical memory * 443,21 MB
    Total virtual memory * 2.00 GB
    * Free up virtual memory * 1.94 GB
    * Page file space * 2.24 GB

    * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
    * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
    * Manufacturer of memory * Hyundai Electronics
    * Date of manufacture memory * week 39, year 2006
    * Revision memory code * 4141

    * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
    * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
    * Manufacturer of memory * Hyundai Electronics
    * Date of manufacture memory * week 39, year 2006
    * Revision memory code * 4141

    * Video card *.
    ------------------------------------------------------------------------------
    * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
    * Video card chip Type * Intel (R) 82945G Express Chipset Family
    * Video card memory * 256,00 MB
    * Video card BIOS * Intel video BIOS
    *Driver*c:\windows\system32\drivers\igdkmd32.sys
    * Version * 7.14.10.1461, 25/03/2008
    ------------------------------------------------------------------------------
    and it's the plug to run the Sims 3
    ------------------------------------------------------------------------------
    THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION

    FOR WINDOWS VISTA
    * Windows Vista (Service Pack 1)
    * 2.4 GHz P4 or equivalent
    * 1.5 GB OF RAM
    * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
    * 128 MB video card with support for Pixel Shader 2.0

    For computers using built-in graphics chipsets, the game requires at least:
    * Intel Integrated Chipset, GMA X 3000 or more.
    * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
    * 0.5 GB additional RAM

    SUPPORTED VIDEO CARDS
    NVIDIA GeForce series
    FX 5900, FX 5950
    6200, 6500, 6600, 6800,
    7200, 7300, 7600, 7800, 7900, 7950
    8400, 8500, 8600, 8800
    9600, 9800, GTX 260, GTX 280

    Series ATI Radeon™
    9500, 9600, 9800
    X 300, X 600, X 700, X 800, X 850
    X 1300, X 1600, X 1800, X 1900, X 1950
    2400, 2600, 2900
    3450, 3650, 3850, 3870,
    4850, 4870

    Intel® Extreme Graphics
    GMA X 3 x 00 series
    Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.

    Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.

    Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
    The NVIDIA GeForce FX series is unsupported under Vista.

    and he also said when I watched the news of the memory of the BIOS screen:

    Installed memory 1024 MB/PC2-4200
    Bank 1 512 MB/DDR2 SDRAM memory
    Memory Bank 2 not installed
    Memory bench 3 512 MB/DDR2 SDRAM
    Memory bench 4 not installed

    I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

    Message edited by CareBear31 on 02/05/2009 13:02

    Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

    Change the power supply: This video on youtube is pretty decent for generic power supply switching.

    Thislinkhas information on opening the cover and remove the cover.

    When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

    Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

  • Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

    Hello

    You receive an error message?

    Method 1:

    You can update the drivers of graphics cards and check.
    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly


    Method 2:

    You can also perform a clean boot and check if it works:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article

    You can also check out the link:
    The problems of the game performance
    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
    Diagnose problems running DirectX
    http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  • HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

    I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

    Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

    I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

    Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

    LSUfan71

    Hello;

    Let me welcome you on the HP forums!

    I read your post about the use of the video taken two DVI and VGA and wanted to help.

    According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • Unable to play Minecraft and driver video card error message

    Recently I bought Minecraft, but the game won't load due to the following error:
    Bad video card drivers!
    -----------------------

    Minecraft could not start because it did not find an accelerated OpenGL mode. Generally, this can be corrected by updating the video card drivers.

    BEGIN 7fe0271 error REPORT
    Generated 08/11/11 15:20
    Minecraft: Minecraft Beta 1.7.3
    OS: Windows 7 (x 86) version 6.1
    Java: 1.6.0_26, Sun Microsystems Inc.
    VM: Java hotspot Client VM (mixed mode), Sun Microsystems Inc.
    LWJGL: 2.4.2
    [unable to get system (java.lang.NullPointerException) properties]
    org.lwjgl.LWJGLException: Pixel format not accelerated
    t org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelForma (Native Method)
    at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat (WindowsPeerInfo.java:52)
    at org.lwjgl.opengl.WindowsDisplay.createWindow (Windows wsDisplay.java:185)
    at org.lwjgl.opengl.Display.createWindow (Display.java:311)
    at org.lwjgl.opengl.Display.create(Display.java:856)
    at org.lwjgl.opengl.Display.create(Display.java:784)
    at org.lwjgl.opengl.Display.create(Display.java:765)
    at net.minecraft.client.Minecraft.a(SourceFile:294)
    at net.minecraft.client.Minecraft.run(SourceFile:716)
    at java.lang.Thread.run (unknown Source)
    ERROR a77717d2 END REPORT

    I looked online and the reason is that my graphics driver is not up-to-date, however, because use custom drivers Toshiba I can't go to the website of intel and get the newest, I know that my only current is obsolete, but there are no new drivers on the Toshiba site. Help, please!

    Hi OzzyAmir,

    Can you post what model of laptop, you have, please?

    Usually not speaking, there s no problem to install other display drivers, but it happens on your own risk because the drivers are not pre-tested by Toshiba.

    Intel drivers, you can install through the Device Manager > update drivers if you click on the graphics card. Then, choose the Advanced installation and choose the directory of the driver.

  • I spilled liquid on my G6 Pavilion and the video card no longer works

    HP Pavilion G6 series number 868R4-FV6RQ-BHRP9-BJCP9-BY2TY

    Running windows 7.

    A cat knocked over a cup spill liquid on the computer. He connected, blue return projected and restarted itself. Aside from the message that it is a Code of 43 for the video card driver, things seem to work.

    What can we do?

    Turn it off! Unplug the power cord!  Remove the battery!

    Partially disassemble the laptop and let it dry for 5 days in an air-conditioned room, back to gether and hope that there is no permanent damage.

  • A55 and PCIe video card installation

    Work with a 8705-DHU and try to install a video card into the PCIe slot to allow the use of two monitors.  The idea is to attach a monitor to the on-board and the new card for a second monitor, and then expand office.  I got the second card installed (PN 73P 2516) and see the family of chipsets Intel 946GZ Express, no other video card.  I expect to see two graphics cards in Device Manager, but see only one.  Both monitors work, but I can't extend the desktop, only clone.  Display Properties Windows sees only a graphics card and therefore only a single monitor.  Intel graphics options see 2 monitors, but allows only for monitors must be cloned.  I can't imagine what I'm doing wrong, I worked on the PC for a long time.  There are a number of FRU, (39J9334) on the map, but I am at a loss.  I'll update the BIOS tomorrow when I return to the system, but I'm looking for other ideas.  I used the drivers supplied with the card, found an update, but once installed the cloning stop working.  I couldn't find anything in the BIOS, so I am at a loss.  Any ideas/suggestions would be appreciated.

    Other research showing the card only supports clone mode on this particular system... too bad, I have not found this link before posting.

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-60292

  • p6216it and new video card

    Hi all

    I just buyed a desktop Pavilion p6216it and im intend to change video card PC. One that comes with the computer is an ATI HD4350 with 512 MB dedicated. I would replace this card with an Nvidia gtx260 896 MB (who need extra power).

    The power supply (PSU) that comes with the PC is a power of 300W and isn't any 6-pin Molex or PCI - X, but only 2 SATA power-free location.

    Now, I think I have 2 choices:

    (1) keep my power supply 300W for the gtx260 and buy an adapter to convert sata pci - x power (but perhaps 300W is not enough)

    (2) buy a new power supply (450W would be nice I think)

    What should I do?

    Thanks in advance and sorry for my English

    Treuz

    If you need extra power never so it wouldn't really be 'better' unless you can get one of the same quality for about the same price (or less) than the supply of 450W. Go to an increase in the power supply would ensure that you have enough power, if you add accessories or cards in the future however.

  • Food and update video card for Pavilion s5 - 1021p

    I want to upgrade the power supply 270w in my Pavilion s5 - to 500-600w 1021p and replace the graphics card integrated with a Radeon 4650 video card.  Is it possible, given the constraints of size?  Any help is appreciated!

    Hi callen3625,

    According to HP Partsufer, the power supply of your PC is not included because it has a separate part number.  This is also confirmed by the information contained in the library of Services HP partner.  The block of power SUPPLY HP Partsurfer therein is 220 watts.

    Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

    Even more recent slimlines are other graphics cards AMD that work with a 220 Watt power supply.  Look here and here.

    Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

    You should contact HP support and get a recommendation of the video card or maybe even HP Partsurfer.

  • All usb ports not working does not correctly and the video card are not available with DVI cable

    I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

    Hello

    What is the brand and model of the computer?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

    Remove and reinstall all USB controllers.

    a. to remove and reinstall all USB controllers, follow these steps:

    b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

    c. click on the Hardware tab.

    d. click the Device Manager button.

    e. expand Bus USB controllers.

    f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    g. restart the computer and reinstall the USB controllers.

    h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

    Method 3:

    Update your drivers chipset system to the manufacturer's website and check the status of the issue.

  • M70e Dual - VGA and DVI (Quadro FX380) display adapters

    Hello

    Recently, my team received M70e SFF machines with two monitors to work on. These computers for some reason any, that all came with nVidia Quadro FX380 workstation GPU, I installed the drivers for nVidia cards and chips intel integrated (both work fine individually). My problem is that I can't run at the same time, I can only have a monitor works at any time.

    Currently running Win7 Pro 32-bit on all machines and have checked the settings of the BIOS for the graphics cards, I get the following options:

    IGD (which I suppose is the graphics card integrated due to its activation the VGA only)

    PCI/IGD (integrated/regular PCI card, only the VGA monitor works)

    PEG/IGD (integrated/PCIe, only VGA works)

    PCI/IGD (PCI/integrated, only VGA works)

    PCI/PEG (PCI/PCIe, only monitor connected to the quadro works)

    PEG/IGD (PCIe/integrated, it's that I want to work, but only the quadro works on this one)

    PEG/PCI (PCI/PCIe, quadro only works)

    I looked everywhere in the BIOS for all the other options which refer to the screen, but I had no chance.

    Any ideas?

    Thanks in advance.

    EDIT: I forgot to mention that I did not the ADD2 adapter that works very well alongside the integrated graphics card, may not try with the Quadro as there is only 1 slot PCIe.

    It is not possible to have dual display where one view uses integrated Intel and other uses of the Nvidia card. Dual display on Lenovo computers is only possible with the card installed ADD2 (using Intel integrated graphics card), OR if a dual display capable graphics card is used. These dual cards usually have the DB-59 on the back connection and require a dongle to cut two monitors signals. Later maps of ADD - 2 (the one reference you at Compuvest) is capable of a signal only DVI, VGA screens do not work.

    See this link HERE for more information. Lenovos of information available for the management of this function is sorely lacking.

  • Satellite C660-1LD and OpenGL video card

    Hello

    I bought a program that needs a graphics card with openGL driver - how do I know if my laptop has this? If it is not person knows if I can get one and if so where to go?

    Also how can I update the driver on my laptop (if I need because I think they get the automatic updates)?

    Thanks for your help.

    Elain

    Hello

    OpenGL is a standard specification and an interface for applications that produce 2D and 3D computer graphics. OpenGL is open source.
    There is also another standard called DirectX. This is from Microsoft and most graphic drivers media and contains the DirectX instead of OpenGL.

    How to get the OpenGL?
    Well, the OpenGL must be part of the graphics card driver, so you have to find a driver already include the OpenGL as shown here:
    http://www.OpenGL.org/wiki/Getting_Started

    Satellite C660-1LD seems to be equipped with a graphics Intel HM55 HD card.
    That's why I recommend the Intel page for these drivers.

  • power supply and the video card update

    Hi im planning on getting a cx600 power watt corsair and a sapphire radeon hd 6870, but I want to fit the PSU. I have a h8 hpe - 1240t. also, I hear the 6870 is 10.5 in and want to ask if my big enough to put in this big computer card. Thank you

    Hello

    Go with the card XFX 6870 that I quoted above, because it is an easier installation and it has 2 GB of memory frame buffer.

  • The upgrade of power and a video card

    I have a HP Pavilion Elite HPE - 410 t

    I am a dealer of stock and want to run 3 monitors with a diamond 6670.

    The card is 7 in long and a double wide, although it seems that the fan is taking extra space

    I need the power upgrade.  I see recommended Corsair, but I found a post that said HP was the only son of a 24 connector pins that would fail to supply 3rd party.

    Will be the privateer and the card to adapt?

    Thank you.

    I've not used one, but he claims he mirror, extend or rotate. I'll take 'mirror' to signify to display the same image on another monitor. I take "extend" meaning display a new picture above, below, left or right of an existing image.

    Frank

Maybe you are looking for