U2415 Service Menu!

Similar Questions

• Investigation of Toshiba TL938 service menu

  Hello

  I just bought TL938 TV. It was the last in the store and worked as a sample.
  Is there a way to check its hours of service? I believe that in the menu service should have such an option, judging from my old Samsung LCD TV. Thanks in advance.

  I can't speak from personal experience, because I have not used the service mode. I found two informal sources (but what TV manufacturer makes public access to service mode?) who seem to be Concord on this method:

  _I. Toshiba LCD Service Menu Code_

  1. press the {MENU} button on the remote control.
  2. turn on the icon 'picture '.
  3. press the {9} {3} {0} {1} on the remote control buttons.
  The Service Menu appears with the following Modes:
  'Options' - 'adjustments' - 'Selections '.
  4. use the {OK} button to access and navigate between these Modes
  5. to change the use of values {FLIGHT +} {(VOL-) {P} + {P}-}
  6. to exit, press {MENU} button.

  http://tvservicemenu.blogspot.ro/2011/06/LCD-Toshiba-TV-service-menu.html
  http://factory-reset.com/wiki/Toshiba_Service_Menu

  II. Another (?) way: how to access to a Toshiba Service Menu_

  1. turn on the Toshiba TV. You can either press the button on the remote control or the button on the remote control itself.
  2. press the "Mute" button on the remote three times.
  3. press "Mute" again and hold, then press the "Menu" button on the side of the TV.
  4. release both buttons together at the same time. You will see a ' happen on the television screen.
  5. press on the "Menu" key once more on the side of the TV. You will now be in Mode 'Service' of the Toshiba television.

  http://www.ehow.com/how_7158562_access-Toshiba-service-menu.html

  What I haven't lived successfully on my TL938, however, is the so-called "clone mode" when you use 'Toshiba Channel Editor' request for official sources:
  http://www.Toshiba-OM.NET/firmware.php
  I followed the instructions according to the PDF ' ToshibaEdit Quick-English manual ' downloaded from here:
  http://portalcp.toshiba-tro.de/documents/10781/6dd55351-6749-41e7-8d21-cb5b8b7b07f9

  _Enter Mode_ TV Clone:

  1. press on "MUTE" on the remote control.
  2. press on "MUTE" again and keep holding down.
  02:03 press "VOL -" button direct control TV
  (depending on your model, this can be either a button key or a front sensor side)
  4. the Clone Mode will be displayed.
  5. Select 'TV USB' or 'USB to TV '.

• Z6200: z6200 penetrates is not in service menu?

  I am having trouble with my z6200 penetrates is not in the service menu. I press the top arrow + cancel + power for 5 seconds. It turns on then back directly to the exit? I'm trying to fix a 24:10 error and it really is strarting to annoy me.

  Someone please help

  Hello

  You must use the OK key instead of the Cancel.

  Best regards

  Mike G

• I can't find the charger OR in the Service menu

  I'm trying to detect the intruments to NOR-MAX, a connected by USB - DAQ and the other connected by USB-serial. Despite the USB - DAQ appearing in Device Manager, it is not in NOR-MAX. And while I can see the USB-Serial COM port, I can't communicate with the instrument. The help resource suggested that I make sure that the mDNS NI answering Service and device charger NEITHER were running. I found NImDNSRS running in the Services menu, but the device loader OR none were. I found advice on how to turn it on, but I don't know what I need to install to make it available.

  Looks like you have not installed the drivers of devices OR from the enumerator GPIB tea service and a few others are missing too.  You can download the file here and here

  NOTE: drivers eventually got too big for a DVD and both are needed for a full install (part of why it comes on USB3.0 sticks now)

• Code service menu

  Hello. I would like to know if there is a code to access the Service on Defy menu and if yes which is this code...

  Thanks in advance
  

  As I said earlier, this code will not be provided here.

  http://bit.LY/x96GD8

• ScanJet 7000NX Service Menu?

  Hello

  I need to enter the menu of service on my HP 7000NX scanner to do a reset. The admin menu is protected by password and for the life of me, I don't remember my password, so I need the service PIN. Can someone point me in the right direction?

  Thank you

  He solved. If someone runs into a locking of these, you can reset the admin password by:

  Loosen the three black screws on the back panel, carefully sliding the Assembly. Find the 'COM' connector on the motherboard of the right side.

  Pin a RX pin 2: Texas, pin 3 is GND, this thread to an adapter or cable RS232 (reverse your RX and TX lines on the end of the computer).

  Open a console with 115200 baud

  Hold down the CTRL key, and then press the 'f' key repeatedly until the EFI shell appears

  Run the command "dmpstore d AdminPwd" to remove the password

  Run the command "reset" to restart the scanner.

  You now have access to the menu Admin without password it is worth noting that you can not do that thing with a USB keyboard (thankfully).

• Refresh security in Shared Services menu is not available

  We have EAS 9.3.3 and when I right-click the Security node, I don't see the security of Refresh of SS in the menu. I logged in using admin id and I already checked the permissions. I read recently in some documents that EA Refresh is no longer necessary and the menu is no longer present in the EA. Can someone please confirm this? If this isn't the case, please let me know where I should be looking. A quick response to popular.
  
  Thank you

  In 9.3.3 the possibility to update security of shared services is no longer necessary
  Take a look at the Readme:-http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/esb_93300_readme.pdf
  Article - "deletion of synchronization of security between Essbase and Shared Services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to change the Services Menu.

  Installed WordService to test. Ran very well but I have no reason to keep it. I removed all traces of it except, WordService choices that are listed in the preferences of Services. It does not hurt anything for them to be there, but if someone knows which file needs change or to delete I wouldn't mind if they were gone.

  TIA

  Look in your library in the folder of the User Services:

  ~/Library/services/

  You also can right-click on the item in the preferences of Services (keyboard shortcuts) and choose to Revel in the Finder, and it will open a window to the Services folder.

  If it's there, move it to the Recycle Bin and restart the computer.

• Impossible to update firmware (CM1410) 20131028 - no RFU on Service menu CM1415fnw

  I have trouble to update the firmware of my printer.

  Model CM1415fnw

  Type of connection without wire/Hello

  Service ID 21094

  FW Version 2010-11-25.

  Driver HP LaserJet CM1415fnw 1.0 Version

  Product number CE862A

  I am connected via a MacBook with OS X 10.9.2. I have Parallels Desktop 9 installed under Windows XP.

  I downloaded and installed the latest driver for my computer.

  HP LaserJet Pro CM1415fn color MFP series Full Software Solution - OS X 10.9 Mavericks2014-01-31, V...

  I downloaded the Mac firmware update. File name: CM1410_MFP_Series_FW_Update - 20131028.dmg [1/1, 48.86 M] Version 20131028. When I try to run the update of the firmware on Mac, I get the error message "cannot open"HP Firmware Updater". You must eject the disk image. "Preferences | Security | Allow applications downloaded from anywhere. I tried to download the update several times, in the event that a download has been altered. Did not help.

  I downloaded the firmware from the Windows Update. File name: CM1410_MFP_Series_FW_Update - 20131028.exe [1/1, 12.12 M] Version 20131028. When I run the update of the firmware in Windows, the "HP LaserJet Professional CM1410 MFP Series Firmware Updater 20131028" program runs in a window. I am able to choose my printer "HP LaserJet CM1415fnw (41 d 33)". I click on the Firmware 'send '. The 'Progress' bar shows the progression up to the end. I click on "Exit". But nothing happens on the side of the printer. And the firmware information remains the same.

  Hi frustrat10n,

  I understand that you can not update the firmware of the printer.

  I'll be happy to help you.

  There is no RFU on this printer. Just continue.

  I checked the site and it is not an update of the firmware that you can run on 10.9.

  I would say for temporarily, connect the USB cable and try upgrading the firmware on a PC or a computer with 10.8 or less.

  It might work if you are using bootcamp on side windows, but probably not by parallels.

  Why do you need to update the firmware of the printer?

  You have problems?

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great weekend!

• Essbase Studio 11.1.2.3 version service menu drop-down

  Hi gurus,

  I have a version of the 11.1.2.3 on Windows Server 2008 R2 environment, and whenever I start the Essbase Studio Service it just stops.

  I found the following at EventViewer:

  The description for event ID 0 in source HyS9EssbaseStudio_epmsystem1 is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Java Virtual Machine has finished with a code 1, the service is stopped.

  the message resource is present, but the message is not in the string/message table

  Anyone know what this means and what is the origin of this service?

  Thanks in advance,

  Concerning

  Hello!

  I found the problem. The password DB Essbase Studio has been exceeded (as you can see in the newspaper Essbase Studio below):

  [2014 01-16 T 09: 41:23.448 - 02:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] as configuracao servidor Studio sao recuperadas propriedades do registro Oracle.

  [2014 01-16 T 09: 41:23.461 - 02:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] land of configuracao server: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.

  [2014 01-16 T 09: 41:23.481 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] recorder configuracao maintains: C:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.

  [2014 01-16 T 09: 41:23.482 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Inicializando.

  [2014 01-16 T 09: 41:23.484 - 02:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved

  [2014 01-16 T 09: 41:26.179 - 02:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] false Ativado client status

  [2014 01-16 T 09: 41:26.191 - 02:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] O client of titular faith criado para o produto HUB - 11.1.2.0

  [2014 01-16 T 09: 41:27.138 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao para carregar sap pilot.

  [2014 01-16 T 09: 41:27.151 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao carregar driver para teradata.

  [2014 01-16 T 09: 41:27.157 - 02:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: ] Falha ao carregar driver para netezza.

  [2014 01-16 T 09: 41:27.252 - 02:00] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] e possible estabelecer conexao com o servidor não Oracle: ORA-28001: the password has expired [[ ]]

  .

  ]]

  [2014 01-16 T 09: 41:27.304 - 02:00] [hyperion] [ERROR] [ESSSTD-145015] [com.hyperion.cp.driver] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection] [SRC_METHOD: createSQLConnection] e possible estabelecer conexao com o servidor não Oracle: ORA-28001: the password has expired [[ ]]

  .

  ]]

  [2014 01-16 T 09: 41:27.306 - 02:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: RJ1 - 2 K 8-BI-P06] [nwaddr: 172.16.0.5] [tid: 10] [user name: System] [ecid: 0000KEQqivqFw0G6yzuXMG1IpwLR000001, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Nao e o armazenamento catalogo initialize possible. Verifique se o land server.properties contemporary have information corretas. [[

  com.hyperion.cp.catalog.exceptions.CatalogInitializationException: Nao e initialize o armazenamento dados mechanism possible.

  at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:91)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:104)

  at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)

  to com.hyperion.cp.catalog.Catalog. (Catalog.java:81)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName(Class.java:169)

  at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)

  to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)

  at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)

  at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)

  at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)

  at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)

  Caused by: com.hyperion.cp.driver.util.DriverConnectionException: Nao e possible estabelecer conexao com o servidor Oracle.

  at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:297)

  to com.hyperion.cp.driver.adapters.sql.SQLConnection$ ConnectionPool. (SQLConnection.java:1229)

  at com.hyperion.cp.driver.adapters.sql.SQLConnection.construct(SQLConnection.java:450)

  at com.hyperion.cp.driver.ConnectionManager.getConnection(ConnectionManager.java:113)

  at com.hyperion.cp.driver.DriverEngine.getConnection(DriverEngine.java:60)

  at com.hyperion.cp.server.QueueableTask.setMetadataConnection(QueueableTask.java:53)

  at com.hyperion.cp.catalog.storage.StorageFactory.initialize(StorageFactory.java:73)

  ... 11 more

  Caused by: java.sql.SQLException: ORA-28001: the password has expired

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:397)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)

  at oracle.jdbc.driver.T4CTTIfun.processError(T4CTTIfun.java:689)

  at oracle.jdbc.driver.T4CTTIoauthenticate.processError(T4CTTIoauthenticate.java:455)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)

  at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:387)

  at oracle.jdbc.driver.T4CTTIoauthenticate.doOAUTH(T4CTTIoauthenticate.java:814)

  at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:418)

  to oracle.jdbc.driver.PhysicalConnection. (PhysicalConnection.java:678)

  to oracle.jdbc.driver.T4CConnection. (T4CConnection.java:234)

  at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)

  at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:567)

  at java.sql.DriverManager.getConnection(DriverManager.java:582)

  at java.sql.DriverManager.getConnection(DriverManager.java:154)

  at com.hyperion.cp.driver.adapters.sql.oracle.OracleConnection.createSQLConnection(OracleConnection.java:280)

  ... more than 17

  ]]

  After having found this user to the DB Server service started without any error.

  Thank you all for your time.

  Kind regards

  Alvaro

• Photosmart premium C310a missing c: eallinone enable web services in the web services settings menu

  I am trying to connect via the GET more button in the main menu and the printer will not connect to internet, everything else works fine. Look at web services menu not enabled email eprint printer is disabled. looking at

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903 it shows enable web services, such as a menu item, that it is not present on my c310a. Any ideas?

  Hi @hunterj1957

  Welcome to the Forums of HP's Support. I understand that you are unable to access one of the applications on your Photosmart Premium C310 printer.

  I've included a link to a post of @PrintApper respect to platelets called HP Apps Service retirement on several printers.  It has information about apps on your printer.

• Reduce the Overdrive (ghosting) by using the Menu of Service, GN246HL

  I would like to have access to the service menu so I can reduce my overdrive settings to correct the overshoot. This has been requested for years, turn on Acer!

  

  Found the service menu but not option

• Defragmentation and menu of services

  Hello

  Looked defragger computer hubbys to see he did not task since 2007!  Considered the responses all over the internet and I am now stuck.

  Scheduled task has been set to automatic but the calendar says 'never' to perform according to defrag.  I went into the services menu to see if disk defragmentation is enabled and it is not there. I can defragment manually, and it seems to take hours.  Anyone know how I can add this new in the services menu so that I can implement to perform tasks automatically.

  Thank you.

  Hello Carla,.

  If you run Disk Defragmenter automatically or manually, Disk Defragmenter may take a few minutes to a few hours at the end, depending on the size and the degree of fragmentation of your hard drive. You can still use your computer during the defragmentation process. It runs in the background

  I explained in my previous answer how to schedule a task for disk defragmentation.

  Your second response, I understand that you know how to schedule the task, but could not find the scheduled task in Task Scheduler

  Please follow the steps below to find

  Click Start , type Task Scheduler in the search field and select the Task Scheduler when it appears.
  If you are prompted for permission, click continue .
  In the left column , double-click Task Scheduler Library , thenMicrosoft , Windows , Defrag .

  Here, you will be able to find the scheduled task

  Note: To view them properly, you must display hidden task. Clickview , and then click Show hidden tasks

  I hope this helps

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to update Windows 7; Service will not start, get "Access denied" error then message 0 x 80070005

  I can't start the Windows Update. I tried to start the service in the services menu. I received the "access denied" message then message 0 x 80070005.  have no idea what it is. The PC is a Dell desktop computer around the age of 4 months and no other problems. McAfee virus proctestion updates Windows 7 amd dual core, thin PC works well. Although I would really like to start my service. I checked the Dependices and are all in service and has begun.

  * Title *.
  I can't start windows updates. I go to the services section of my new pc Dell desktop windows 7 amd dual core. the__message says "access denied." message 0 x 80070005. I have NO idea what it is and now I can't update. The PC works well otherwise

  A trial free McAfee or Norton came pre-installed on your computer when you bought it?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  There is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

• Background Intelligent Transfer Service is listed a @%SystemRoot%\System32\qmgr.dll,-1000

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I am running Windows XP SP3 on a desktop computer. I have a problem with windows update does not, I think the problem is the BITS service.
  In the Services list, Windows Update is listed and put on the market but (BITS) Background Intelligent Transfer Service is listed as ' @% SystemRoot%\System32\qmgr.dll,-1000.»
  I tried to follow the instructions on this link.http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-not-listed-under-services-in-win-xp/9e0a3fe5-e193-4441-b3f4-85df0e9b42aa
  I did a search for qmgr.dll and only found a location C:\WINDOWS\system32.
  Research has not found
  C:WINDOWS\ServicePackFiles\i386
  C:WINDOWS\system32\bits
  I also tried
  Microsoftfixit.wuRNP.13130938846183180.1.1.Run.exe
  Microsoftfixit.wuMATSKBRun.exe
  MicrosofFixit.wu.RNP.12309915728318878.Run.exe
  Don't know why there are three versions?
  I run some antivirus scans and found a problem on a second hard drive. I removed the disk and another scanner so that the C drive is clean. I don't know what caused this, but I don't think it's a virus.
  I think I have my installation disc, so perhaps this is an option to use.
   
  Hope someone can help.
  Thank you

  I think that another procedure also credit Xircal will work for your script, so I copy and paste it here.  This assumes that you have no subfolder named bits in the system32 folder

  Here are the steps to follow if you have qmgr.dll in C:\WINDOWS\system32

  1. Go to C:\WINDOWS\system32, right-click and select new | Folder
  2. Name bits (lower case) If you lose the highlight, click on new folder to select it again and then hit F2. Delete "new folder" and rename it to bits
  3. Open C:\WINDOWS\system32 still once, find qmgr.dll, right-click and choose copy from the menu.
  4. Open C:\WINDOWS\system32\bits and choose Paste. You should see qmgr.dll appear in the bits folder.
  5. Then, go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK (If you have run on the start menu, hit instead of key Windows + R)
  6. Do the same with this file: regsvr32 qmgrprxy.dll
  7. Restart the PC and then copy / paste this command into the field run:
  
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf
• If you are prompted to insert the Windows installation CD, ignore this and in the dialog at the bottom where it says copy the files, change the path to C:\WINDOWS\system32
• Restart the PC and then go to the Services and you should be able to see BITS in the list. Open the Services menu, go to start / run, copy and paste services.msc and click OK.
• In the Background Intelligent Transfer Service BITS or is visible in the list, double-click it, and then click on the Start button. This step is just a test to make sure it works properly.
• If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll
• Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup
• Restart again, and then proceed as follows:
• Go to this link and install the IE8 November update:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41074
• Finally, go to the Windows Update site and you should be able to download normally.

  Update regarding the step #14

The linked TechNet page

http://TechNet.Microsoft.com/en-us/security/dn481339

will give you a link for each update of the cumulative months for internet security explore who you must manually download and install before you will not be able to access windows update

https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.