UAC message "do you want to allow the program following an unknown Publisher to make changes to your computer?

Similar Questions

• System Restore cannot run ' do allow you the program following an unknown Publisher to make changes to this computer: rstrui.exe '? "

  I'm trying to run a system restore, and I have Windows 7.  The problem started when Yahoo hacked my Google with Firefox search engine.  I could not understand how to get my search engine to Google, so I tried to do a "system restore."  I get a message from "user account control" who says: ' do you want to allow the program following an unknown Publisher to make changes to this computer: rstrui.exe Editor: unknown origin of the file: hard drive of this computer. "  I think that rstrui.exe is actually the Windows program for the restoration of the system, but I don't think I should get a message like "Editor: unknown."  I ran Malwarebytes Anti-Malware and Spybot, but came to nothing.  If my system restore has been disabled?

  Hello

  This can help you, because these are a few reasons for problems with SR:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  See you soon.

• How can I turn off the "do allow you the program following an unknown Publisher to make changes to this computer?" popup with the application compatibility Wizard? "

  The title says it all really.
  I try to use WinMerge, a program I've used for years.
  Now, every time that I throw I get say popup "want allow you the program following an unknown Publisher to make changes to this computer".

  I tried to use the application compatibility Wizard to solve this problem, and I managed to get to the pop-up window IF I run the program from the inside of the Act.
  But if I try to start the Dowes program I get the popup :(

  I guess I must be missing something in the law so that it works all the time.

  Any help/suggestions appreciated.

  Thank you

  The title says it all really.
  I try to use WinMerge, a program I've used for years.
  Now, every time that I throw I get say popup 'want allow you the program following an unknown Publisher to make changes to this computer?'.»

  I tried to use the application compatibility Wizard to solve this problem, and I managed to get to the pop-up window IF I run the program from the inside of the Act.
  But if I try to start the Dowes program I get the popup :(

  I guess I must be missing something in the law so that it works all the time.

  Any help/suggestions appreciated.

  Thank you

  Hello

  This message appears when the application doesn't have an authority root certificate. These types of notifications can be disabled from user account control settings.
  [1] method: Using Control Panel to change UAC settings
  CAUTION: Turn off UAC is NOT recommended
  • On the start menu, select Control Panel
  • Go to system and security > Action Center
  • In the left pane, select change user account control settings
  • Drag the button scroll never notify
  • Click OK to save your settings

  OPINIONS: UAC can avoid potentially dangerous applications to make changes on your computer. Disable UAC would disable the feature for all programs and not for a specific special application.
  Thank you
  I hope this helps :)

• Message "do you want to allow the following program to make changes to this computer?", in windows 7 "

  I just got this new laptop, and I got tired to remove my accout paswsword so I have things that him... and now every time I try to change things it appears: "do you want to allow the following program to make changes to this computer?  It then invites me type an administrator password and then click Yes. and there is no space to type my password... and also I can only except the No. I can't insert a cd... I have HELP lol

  Access is denied.

  now what? He still does not

  This happens because only Bikesh T jumped an essential step on many machines. Here you go:
  1 log in under an administrator account.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET user administrator / Active: Yes

• Whenever I open Word 2007, UAC asks if I want to allow the program to make changes to this computer

  original title: notification of user account control

  Whenever I open Word 2007 notification of the user account control window appears, asking me if I want to allow the following program to make changes to this computer. How can I stop this and why this is happening? This only happens with Word 2007.

  Whenever I open Word 2007 notification of the user account control window appears, asking me if I want to allow the following program to make changes to this computer. How can I stop this and why this is happening? This only happens with Word 2007.

  Hi kathleen,.

  When this happens, bottom right of the window that appears, you will see blue' when thease noticefication appears, click on it and then just pull the slider down a notch by default.

  hope this helps

  ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster

• How to stop the pop up message: do you want to add the _ directory to your search path?

  After you install LabVIEW 8.6.1f1 on a new PC, every time I choose one of my screws via her select a VI... palette, I get a pop up message saying: ' you want to add the "P:\CWalker\COREYs LabVIEW subs projects\Phoenix" directory to your search path?

  I've already added 'LabVIEW P:\CWalker\COREYs subs projects\Phoenix' in the option search for VI and restarted path LabVIEW, but the message does not appear.

  Yes, this is how I added the directory.

  Since then, I managed to stop the pop-up message.

  Of course, I had deleted some of the default values, such as "-*" of the VI option search path and that caused the popup message.

  Thank you!

  Corey

• "How to stop this message"do you want to install the plugin required to view media on this page.

  How to stop this message "do you want to install the plugin required to view media on this page.

  I don't need the plugin to play the video ok

  If it comes from the Flash plugin you can switch pref plugins.notifyMissingFlash false on the topic: config page.

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Each time you start firefox asked me if want to allow the program to make changes to the computer

  Whenever I start firefox, I wonder if I want to allow the program to make changes to my computer. Do not have this problem until I updated to the new version.

  This has happened

  Each time Firefox opened

  == I've updated to the new version

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.

  You should also check the firefox.exe program properties in the Firefox program directory.

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• When I try to install Flight Simulator, I get a message asking if I want to allow the program to make changes to my computer.

  original title: RealFlight G5 RC Flight Simulator

  I am trying to install a Flight Simulator, (RealFlight G5) manufactured by large aircraft.

  Great plans is an honest company and I have read nothing but

  good things about this product. "In any case when I'm trying to istall it after the message.

  you want to this editor, or what ever it is said, to make changes to your computer"

  nothing happens after you click Yes. A few seconds of the round circle

  When the memo pointer is then nothing. This has happened with other programs?

  Thank you.

  Hello

  Run the Fixit and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

  Hope this information helps.

• Whenever I use Adobe Creative Cloud, I have the same question; do you want to allow the following program to make changes to this computer. Whenever I click OK. But the question is always every time. I have download the new versin of the designer c.

  See the previous question.

  Please follow every time I use Adobe Creative Cloud, I have the same question, you want to allow the following program to make changes to this computer. Whenever I click OK. But the question is always every time. I have download the new versin of the creative c

  Double Post

• Get the message "do you want to save the changes you made?

  Hi all
  
  I activated the zoom for the standard form of profiles (applications developer) open a new custom form that is used to enter additional information for profiles.
  Two fields profile option id and the profile on the new form option name should get the value in the calling form. Based on these values the new form should show the custom intermediate table data if the record exists.
  If there is no data in this profile of the user must be able to enter information and create new record and commit to the DB table.
  If there is data in the file should be displayed and if the user updates of any field, you have to refresh the record in the DB table.
  I created two new parameters in the new profile_option_id and profile_option_name form which gets its value from the calling form through the custom.pll changes.
  Now, when the new form opens, I see the 2 default fields. But it pops up the message "do you want to save the changes you made?
  If I say no, then the data are displayed for the existing record. If I click Cancel, and then nothing happens.
  Please help me to understand the reason for the pop-up message when the form is opened.
  I changed only a TIME-NEW-FORM-INSTANCE trigger to the new form.
  
  Start
  If (: parameter.profile_option_id is not null) and (: parameter.profile_option_name is not null)
  then
  set_block_property ('NAPP_USR_PRF_OPTIONS_TBL', DEFAULT_WHERE, 'profile_option_id =' |: parameter.profile_option_id |) "(ET profile_option_name = ''' ||: parameter.profile_option_name || ''');"
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;
  end if;
  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();
  end;
  
  I use form 10g and DB version is 11.2.0.2.0
  
  Thank you
  Chrystel

  Hi Olivier,.

  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;

  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();

  After having assigned the value in any field and then using exectue_query triggers the message.
  If option 1 is...
  If you need to assign then first use execute_query; then assign a value

  Option 2 is...
  Use commit_form and then use execute_query;

  I hope this helps...

  Hamid

• Lately everytime I open firefox I get the window «do you want this program to make changes to your computer...» »

  Hello

  I would be so grateful to know how to fix t his, because it's really getting on my nerves.
  

  I have windows 7 pro 64 bit. I mostly always use firefox. Whenever i opened a  new browser, I never got hit with the windows badge and "Do you want this program to make changes to your computer...." or something to that effect. YOu who have windows 7 know what I mean. Of course I click yes, but I NEVER had to do this before. I don't know what changed, what might have happened. I had to have help with some software unrelated to firefox and someone had remote work on my notebook, but he should not have changed browser settings. It is really irritating me to now end to always open the browser now and have to hear that annoying thing and the badge.
  

  My other browsers IE and chrome do not do this.

  How can I fix this? It was never the case before for years.
  

  Thank you thank you very much in advance. I can't use this browser if that's going to happen, he finds himself on my nerves.

  A possible cause of this message, it is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.
  If you cannot make changes, and then start Windows Explorer as an administrator.

• How can I stop "you want to allow Firefox to make changes to your computer?

  I started to download Firefox 4 and do not think that it has finished. 3.16.6 just downloaded again, but when I open Firefox it still says "do you want firefox to make changes to your computer. What I have to delete something and start again?
  Cheryl

  Check that you are not Firefox running as administrator.
  
  Right click on the desktop Firefox shortcut and choose "Properties".
  
  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.
  
  You should also check the firefox.exe program properties in the Firefox program directory.

• The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.

  This came after I installed an iTunes update and wouldn't let me open iTunes.

  This comes first when I clicked to open iTunes:

  The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.

  Then this happens after I crossed the first window that displays the above message.

  iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).

  What does that mean? Why is he doing this? How can I solve this problem? I almost lost all my music, so can't do nothing about it, but why iTunes no longer works?

  Hello Geordie,

  This is probably due to a bad iTunes update. I recommend you to please refer to the http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-message-missing-msvcr80dll-when-trying-to/c8b05024-c4bc-4d14-87ef-4dcbb51c8c97?page=1&tm=1390761398091 thread and an update on the status of the issue.