UC520 # squeeze flash: command does not exist - need help
Hi all
I am having trouble with a UC520. After the update, removal and the phoneloads to the flash Uploader: memory, it is almost full. (But there should be more space available).
When I use the command display flash: or dir/all/recursive flash: the UC500 told me there are 4.505.600 bytes available (123.678.720 bytes used) my card flash 128 Mr. but when I the sum of simple files file sizes it is only 64.543.836 bytes so it must at least be free 60Mbytes.
After some research, I think that the problem is that the flash is fragmented or files where not propperly / entirely deleted.
To resolve this problem Cisco offers the command squeeze . But this command does not exist on the CPU. How to solve this problem, do you have any suggestions?
-Patrick
Wow. I have no idea this is.
I guess you can back them up and get down them. Maybe after some research on orphans' on flash iOS.
Tags: Cisco Support
Similar Questions
-
How to create Error: table or view does not exist - please help
I'm learning to oracle for my new assignment, I come from sql server environment, so I know concept of procedures and functions but found pattern concept is different here. In any case, I'm trying to create procedure in which I'm trying to insert records into a table from another table. Here is my code:
create or replace PROCEDURE UDPINSERTEMPLOYEE AS BEGIN INSERT INTO employee(empid,lastname,firstname) select employee_id, Last_name, First_name FROM HR.employees; END UDP_INSERTEMPLOYEE;
And I got these errors:
- Procedure TempUser.UDPINSERTEMPLOYEE@test
- Error (4,2): PL/SQL: statement ignored
- Error (4.99): PL/SQL: ORA-00942: table or view does not exist
I've tried INSERT INTO employee (empid, lastname, firstname) values (1, 'Last Test', 'First Test') and it works fine.
What wrong with my procedure? Help, please.
Thank you.
Hello
Unless this procedure is located in the HR schema, it needs SELECT on HR.employees table privileges.
Say the procedure is located in the FUBAR scheme (in other words, connect you to Oracle as FUBAR to create).
To grant privileges on the table HR.employees to FUBAR. Then connect like HR and say:
GRANT SELECT ON employees to fubar;
or, if you want everyone on your system to be able to query this table
Employees of SELECT GRANT IT to THE PUBLIC.
If you're not allowed to do this, ask your DBA to do. All the tables in the HR schema provided by Oracle were put there by Oracle to demonstrate things in the documentation. There is nothing secret or dangerous about reading anything in this scheme. On my system PUBLIC has privileges SELECT on all tables in the HR schema.
If the employee (plural) table is not in the same schema as the procedure (e.g., FUBAR), so you must INSERT privileges on the table, too.
Oracle doesn't have a way to grant privileges on all the tables in a schema; You must grant privileges on each table, one at a time.
-
want to do a restore system with disks, but does not I need HELP!
I am eager to the system recovery on my HP computer I have discs of recovery system 1 and 2 and the extra recovery disk. but when I put in the drive of the installation wizard is not coming and I don't know how to run, I made the recovery for anw had the windows installed so my computer was as good as new once again, but this time it does not work I need help please! Thanks in advance
Looks like you are trying to run the Windows recovery. You don't want to do. BTW, please make sure that you have backed up your data on external media because after a destructive restore full factory all of your own files will be gone.
So let's try and start the computer from the recovery discs, you did. Place 1 disc in your drive and restart the computer. When you start your computer, you will see a message that says something like "Press Esc for Boot Menu". Press this function key. Then use your key to select your CD/DVD drive, press ENTER, and the HP system recovery process will begin. Use the advanced option to make the complete factory restore. MS - MVP - Elephant Boy computers - don't panic!
-
Flash Player does not: Please please help
Hi, I have installed and uninstalled flash player at least 30 times now... but still its not working... Please help me... I really need help... Please please
Hi, thanks. I'm sure you know that you must use the 32-bit browser, because there is no Flash Player support for 64-bit.
Also, you must be the administrator and use the administrator account to install Flash Player.
Download uninstaller and save it to your desktop:
http://kb2.Adobe.com/CPS/141/tn_14157.html
Download the Flash Player for Internet Explorer installation program, and then save it to your desktop:
http://fpdownload.Macromedia.com/Get/flashplayer/Current/Install_flash_player_ax.exe
Be sure to read and follow the uninstall instructions as there are a few things you should do first. When you are ready to use the uninstall program, close all browsers. Launch the uninstaller and when you're finished, restart. Since you have IE, reboot again. When it is finished, run the Setup program and when done, reboot once.
Click here to test: http://www.adobe.com/software/flash/about/
Thank you
eidnolb
-
I use Adobe Livecycle 8.2, somehow the admin pwd is locked. Need help to reset. Anyone know how I can do?
If the account got locked due to the consecutive attempts with wrong password, it will get automatically unlocked after the time specified in the account lockout settings but if you forgot the password and want to reset it, then you can go through the blog below
hope that helps...
Santosh-
-
IPsec VPN Phase 2 does not. Need help with the debug output
Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.
Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?
What is the bottom tell me?
===========================================================
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
===============================================================================
ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexiClosure of session
CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.1
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)CCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741===============================================================================
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
pixfirewall hostname
domain ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0
255.255.255.0
permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1
255.255.255.0 0.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
1.1.1.3 outside IP address 255.255.255.0
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.0 255.255.255.0 inside
location of PDM 10.10.10.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
Timeout xlate 0:05:00
Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR
p 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set 1.1.1.2
card crypto outside_map 20 game of transformation-Petaluma_VPN
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m
Ode
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.5 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:8c0d4948407071d3515f1546cf8bc147
: end
pixfirewall #.
=========================================================================
CCC #sh run
Building configuration...Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
endCCC #.
!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/01.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255Hi David,
Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.
Let me know if it helps.
Thank you
Loren
-
Big flash file does not open please help
Hi all
Can someone help me please. I have a flash file that is 74 193 KB, it opens quickly on my pc but when I place the load on my site it takes forever to open. What can I do to make it open fast iss he os on one of my important links.
Please please help
generally, when creating for the web, you don't want more than 1 MB or more... people don't like waiting for things to load a T1 connection... it would take 6 minutes, Dial-up would take 3 hours... you certainly need that flaked into small sections and make it more dynamic.
-
Pavilion dv6: HP 3D driveguard does not work. need help.
Hi guys. I use a computer hp dv6 laptop. I had updated my OS from windows 7 to windows 10 months ago or not. I had a few problems that's why I had to reset my pc. now when he finished, he left a file on my dektop namely "apps removed". you're probably awarre of how it works. the problemm is that when I was on win 7, HP 3D driveguard worked very well. but now, I downloaded the driver from this link (http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_124661_1) and I'm installing, it shows a msg in a dialog box indicating "hp Driveguard cannot install, equipment of the accelerometer is not present or supported on this device" why what is happening? What should I do to make it work?
Hello:
It is the latest version of the driver 3D driveguard for your laptop.
FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe
The link you posted doesn't have no info on it.
-
Several boxes click 1 slide does not - novice needing help
I currently have 4 boxes click on a slide. The student must click to find out what surprising ingredient is included in each product. However, after clicking on one or two, the slide appears out max on time and no other boxes click then display the text when you click on it. I saw a few other elements published on this topic, but I'm at the beginner level and it mentioned or advanced collection actions. Can you provide step by step details for how to ensure that the student is able to click and see all four boxes text, before moving on to the next slide? I have a screenshot below - thank you!
Hello and welcome,
Replace the simple action (I think you used a simple action) by a standard tip action and the reading head will not move.
http://blog.lilybiri.com/why-choose-standard-over-simple-action blog post, or if you prefer a video
I also give a break to the button continue and shorten box click so that their break is before the break of the button continue. For the click boxes that break is at the end of their calendar, which is in your case the end of the chronology of the slide. For buttons, you can time the pause in the timing of their properties panel accordion.
Lilybiri
PS why you post in the forum of advanced Adobe Captivate users if you are a 'beginner '?
-
2 printers - can print only a - print processor does not exist?
I have two printers - one that I just bought. I installed the new without any problems, that is a series of Deskjet 3510. The other is a series of deskjet 6980. I want to use two printers, but when I try to print the 6980 is not in the drop-down list. I see when I look at the printers in my computer, but he can't see it when I try to print. I tried to reinstall the 6980 and it says that the print processor does not exist. Help, please!
There's a troubleshooter created by HP
Please try the HP printer installation wizard
or use this link: www.hp.com/go/tools
-
Satellite L300 - peripheral USB need drivers that does not exist
Satellite L300 race Win Vista 32 bit, connection of new devices (for example the card reader USB Signalex), I ask for a device driver that does not exist on the computer or on the Web and should not be necessary.
How to do this? My previous laptop under Vista did not ask this.
Hi Greenman,
Have you tried other USB devices such as a USB or disk external DRIVE with USB interface? Normally you n t need additional drivers for most USB devices except printers for example.
More I recommend removing all the USB ports on the Device Manager and then restart the laptop.
-
Why can not search for contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist why this before it was ok
original title: the search for contactsHi Sam,
First select the operating system you are using, or maybe give an indication on the operating system installed on your computer. While other members of the community can help you with this problem.
You use Outlook?
Are you referring to outlook contacts?
Reference: http://support.microsoft.com/kb/555375
-
I need to move my e-mail to another account. Moved jobs and that the e-mail does not exist. Unable to get my password.
Hello
Please see change associated with Adobe ID email address
Hope that helps!
Kind regards
Sheena
-
I am running VMware Player on a host Ubuntu 14.04, Win 7 pro x 64 comments. When I start the client OS VMWare gives me this warning
So I want to allow the use of the "reserved host RAM" option instead of playing with the pagefile, but setting told me to doesn't seem to exist in VMware Player
Is there something I can add to the VMX file to enable this option?
Porto Richardson wrote: this setting for VMware Player is found in the file config.ini to the player %allusersprofile%/VMware/VMware
The OP said "I'm under VMware Player on a Ubuntu 14.04 host" so the file name and path you mentioned is not applicable.
@LukeJS host on a Ubuntu (Linux) from the file name won't get the .ini extension and will be simply called the config and will be parked at/etc/vmware /. So with the machine virtual shutdown is not suspended and VMware Player closed then a Terminal used the following command.
sudo nano/etc/vmware/config
Then add the following line.
prefvmx.minVmMemPct = "100".
It is essentially the same parameter that gets the value of the UI of VMware Workstation preferences for submission in response to the message that despite the instructions contained in the message does not exist in the VMware Player preferences user interface.
-
create new folder, but the path does not exist. That's why I need to create!
I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits. In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent. But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist. Which may be the reason I'm trying to create the new folder. Everything seems to be able to do is to slect the existing folders. Where is the creation of a new part of catalogue record?
If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.
Maybe you are looking for
-
IF statement back to '0' on empty cells
How can I get an IF statement to display a cell instead of '0' when it encounters a blank cell in the formula? I want to empty E2 is B2 is blank In cell E2 = IF($a2="Media",B,"") A B C D E F G 1 Media 0.1% 0.5% 1.5% 0.1% 0.5% 1.5% 2 Media 0,0% 0,0% 0
-
Delete spam / advertising home
Hi, I installed the latest version of Skype from the game store and I now this section on top of the main screen: Some buttons are part of the native user interface, but they are rather spam: if I click on them, they open a site at random "dating." H
-
Toshiba Netbook, Trying fix but error code f3-f100-0010
Toshiba NetBook that is not going to fix itself you know the screen after hitting f8 safe mode it safe mode which Repair your computer< it="" goes="" straight="" to="" error="" f3-f100-0010=""> What does that mean?
-
How do I reboot from a cd.
I have a ' virus Backdoor.Tidserve! inf on my computer. " I have no cd of XP Recovery console, so I try to use the Norton recovery boot cd. However - when I try to reboot from cd drive, XP keeps coming with "can not do: code 5. Any ideas on how to so
-
I have problem with dashboard. I would like to summarize all vCPU for VM separately for different OS type. There is in "Operating Sytem" in "Long name" TopolgyType - OS type designating with value e.g. the Linux kernel. How to get the table with all