want to do a restore system with disks, but does not I need HELP!
I am eager to the system recovery on my HP computer I have discs of recovery system 1 and 2 and the extra recovery disk. but when I put in the drive of the installation wizard is not coming and I don't know how to run, I made the recovery for anw had the windows installed so my computer was as good as new once again, but this time it does not work I need help please! Thanks in advance
Looks like you are trying to run the Windows recovery. You don't want to do. BTW, please make sure that you have backed up your data on external media because after a destructive restore full factory all of your own files will be gone.
So let's try and start the computer from the recovery discs, you did. Place 1 disc in your drive and restart the computer. When you start your computer, you will see a message that says something like "Press Esc for Boot Menu". Press this function key. Then use your key to select your CD/DVD drive, press ENTER, and the HP system recovery process will begin. Use the advanced option to make the complete factory restore. MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
I am running Firefox on Windows 7 26. Last Windows necessary to make some updates to safety, the night I closed Firefox I normally do it, use the tab out and let windows to go forward with its updates. This morning I found that Firefox has been removed. I tried to find out that my last night sessionstore.js file still exists and it does. When Firefox came all my tabs have disappeared, also my favorites, modules, etc. I clicked on "restore previous session", but nothing happens. I have a file of last night bookmarks in the bookmarks folder, and the file sessionstore.js is dated last night when I closed Firefox in a normal manner. I'm puzzled. Firefox didn't fail, I closed it as I always do before that I have authorized Microsoft Windows Update and restart. Who am I lack/hurt? I leave this open session so that I can continue to have access to this file sessionstore, as I have it copied in a folder that I use for this kind of disaster. This windows necessary also deleted my MailWasher Pro program update, changed how the Windows Explorer and more 'fun '. Thank you, Microsoft. It is barely possible that I can recreate my tabs and it would be extremely aggravating, but I have no way to re-create all my favorites. I need help.
Hello
If you have not closed since the last time that you can type in "subject: sessionrestore ' on the page and there should be a list of tabs from last time. If this consistantly come please see the history on open gint settin settingandFirefox > General Options-> view my tabs from last time
Privacy > historyHave these options will prevent tabs away, after the browser is closed.
Please let me know if this does not resolve the question of restoration session being closed. We can help if it is touched by a plug-in by starting the browser in safe mode.
-
IPsec VPN Phase 2 does not. Need help with the debug output
Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.
Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?
What is the bottom tell me?
===========================================================
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
===============================================================================
ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexiClosure of session
CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.1
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)CCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741===============================================================================
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
pixfirewall hostname
domain ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0
255.255.255.0
permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1
255.255.255.0 0.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
1.1.1.3 outside IP address 255.255.255.0
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.0 255.255.255.0 inside
location of PDM 10.10.10.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
Timeout xlate 0:05:00
Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR
p 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set 1.1.1.2
card crypto outside_map 20 game of transformation-Petaluma_VPN
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m
Ode
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.5 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:8c0d4948407071d3515f1546cf8bc147
: end
pixfirewall #.
=========================================================================
CCC #sh run
Building configuration...Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
endCCC #.
!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/01.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255Hi David,
Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.
Let me know if it helps.
Thank you
Loren
-
PC installed disks, but does not recognize Droid.
My Droid works well offline. Today, for the first time, I tried to connect it to my PC via a USB cable. The computer recognizes the connection initial and installed new drivers. The Device Manager shows Motorola A855 USB drive as a hard drive, where he labeled H. The problem is that I can't drive hard H on Windows Explorer, which I use to transfer files or in my connections. I have a Vaio PC with Windows 7 64 bit.
I would like suggestions.
Thank you
Ed
/ * Style definitions * /.
table. MsoNormalTable
{mso-style-name: "Table Normal";}
MSO-knew-rowband-size: 0;
MSO-knew-colband-size: 0;
MSO-style - noshow:yes;
MSO-style-priority: 99;
MSO-style - qformat:yes;
"mso-style-parent:" ";" "
MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
MSO-para-margin: 0;
MSO-para-margin-bottom: .0001pt;
MSO-pagination: widow-orphan;
font-size: 11.0pt;
font family: 'Calibri', 'sans-serif ';
MSO-ascii-font-family: Calibri;
MSO-ascii-theme-make: minor-latin;
mso-fareast-font-family: "Times New Roman";
mso-fareast-theme-make: minor-fareast.
MSO-hansi-font-family: Calibri;
MSO-hansi-theme-make: minor-latin;
mso-bidi-font-family: "Times New Roman";
mso-bidi-theme-make: minor-bidi ;}On the Droid screen, pull down the notification bar. Where it says USB connected, which affect and then on the other screen select Mount.
-
View-PCoIP does not connect on the desktop with ViewPlanner, but does not connect manually
I saw this mentioned in a few subjects, but I've not seen a resolution.
I configured a remote view-PCoIP see Planner run profile. The customer and and food Office of VMs on. The Office is a newspaper and connect the client starts the view Client PCoIP. It connects on the view connection server, but not on the desktop. The error message is 'office 'Unknown' is not in the list of desktop titled. (see the folder of the image as an attachment).
I press the OK button on the error message, start the Client view manually, by using the same credentials see Planner in AD, and I am able to connect to connect to the server, then the virtual desktop computer. The job see Planner runs even at this place (if I don't stop to see Planner first).
Two days ago, that I was able to run a desktop computer without problem running 10 profile. Since then, I've added several hundred offices at the pool, no other configuration change I can think. The pool is an automatic with floating assignments, office computers are supplied with View Composer. The 'Test' AD security group has the right (see image file).
I don't understand why see Planner cannot connect to a desktop computer, so that I can do it manually.
I see the same behavior with a single or multiple, virtual machine run profile.
Here is an extract from the journal of the unit (all IP addresses are on an area of temporary laboratory, so I really don't like if they are exposed).
Thanks and greetings
Wednesday, March 26, 2014 23:17:29 DEBUG add users ['Test_1'] for security AD Group: Test
Wednesday, March 26, 2014 23:17:29 DEBUG all users added to AD security group: Test
Wednesday, March 26, 2014 23:17:31 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop: 0, Clients: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
Wednesday, March 26, 2014 23:18:19 registration of new customer INFORMATION: 10.128.33.73
Wednesday, March 26, 2014 23:18:19 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 0]
Wednesday, March 26, 2014 23:18:20 new INFORMATION server registration: 10.128.33.132
Wednesday, March 26, 2014 23:18:20 INFO current registered status machines: [pairs required: 1] [clients: 1] [server: 1]
Wednesday, March 26, 2014 23:18:20 INFO get the IP address Office VM-1 of VC
Wednesday, March 26, 2014 23:18:21 DEBUG returning to the current state: 0 with status message: [IP recorded: desktop computers: 1, customers: 1] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors), Clients: 0]
Wednesday, March 26, 2014 23:18:30 INFO get the IP address VM VC client1
Wednesday, March 26, 2014 23:18:30 INFO got the client1 virtual machine IP address: 10.128.33.73
Wednesday, March 26, 2014 23:18:30 INFO get the IP address Office VM-1 of VC
Wednesday, March 26, 2014 23:18:30 INFO obtained IP address for the virtual office-1 computer: 10.128.33.132
Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.73-> name: client1
Wednesday, March 26, 2014 23:18:30 DEBUG IP: 10.128.33.132-> name: office-1 computer
Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.132."
Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State = 'Unpaired', name = 'computer office-1 "where IPADDR = '10.128.33.132'".
Wednesday, March 26, 2014 23:18:30 INFO query: SELECT * from hostinfo where IPADDR = "10.128.33.73."
Wednesday, March 26, 2014 23:18:30 INFO Running query: UPDATE SET is_Client = '1' hostinfo, State is 'Unpaired', name = 'client1' where IPADDR = "10.128.33.73."
Wednesday, March 26, 2014 23:18:30 INFO registration remaining VMs
Wednesday, March 26, 2014 23:18:30 reached the threshold of the INFO for the number of machines... The plan of starting reference...
Wednesday, March 26, 2014 23:18:30 INFO waiting for virtual machines to settle and sleep during the time scale
Wednesday, March 26, 2014 23:18:40 DEBUG of waiting for prefixes map to be extracted from Server view...
Wednesday, March 26, 2014 23:18:41 INFO function call right with arguments: (pools: [], domain name: domaine.net, groupnames: ['Test'])
Wednesday, March 26, 2014 23:18:41 groups of security of the object DEBUG AD ['Test'] to the office pool
Wednesday, March 26, 2014 23:19:10 INFO assigning client-server for 1 pair
Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.73."
Wednesday, March 26, 2014 23:19:10 INFO Running query: UPDATE hostinfo SET state = 'Matched' where IPADDR = "10.128.33.132."
Wednesday, March 26, 2014 23:19:10 INFO query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('PCoIP-1VM', '10.128.33.73', '10.128.33.132', 'View-PCoIP', 'Test_1', "passw0rd", "waiting", '2014-03-26 23:19:10 ', 2)
Wednesday, March 26, 2014 23:19:10 request information: SELECT * from testinfo where testname = 'PCoIP-1VM' and test_state = 'pending' and ClientIP_FK = '10.128.33.73' and ServerIP_FK = '10.128.33.132. '
Wednesday, March 26, 2014 23:19:10 INFO -.
Wednesday, March 26, 2014 23:19:10 INFO launch the execution plan for the run profile
Wednesday, March 26, 2014 23:19:10 INFO -.
Wednesday, March 26, 2014 23:19:10 DEBUG begins to gather statistics periodically VC...
Wednesday, March 26, 2014 23:19:11 INFO from the workload for all assigned pairs...
Wednesday, March 26, 2014 23:19:11 INFO remote command running on 10.128.33.132 machine: Logoff
Wednesday, March 26, 2014 23:19:11 command run on the remote computer INFO: Logoff
Wednesday, March 26, 2014 23:19:11 INFO wait until all desktop computers have disconnected
Wednesday, March 26, 2014 23:19:21 INFO continues the race after waiting
Wednesday, March 26, 2014 23:19:21 INFO looking for name of the cluster for computer office-1
Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.73."
Wednesday, March 26, 2014 23:19:21 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.128.33.132."
Wednesday, March 26, 2014 23:19:21 request information: UPDATE SET = '1VM-PCoIP' test_name testinfo, Protocol is 'View-PCoIP', name of user = 'Test_1', password = 'Q1w2e3r4!', test_state = 'Running', start_time = "2014-03-26 23:19:11" where test_id = 2837
Wednesday, March 26, 2014 23:19:21 INFO running commands remotely with args: customer: 10.128.33.73, server: 10.128.216.88, Protocol: view-PCoIP, test_name: PCoIP-1VM, vmuser: Test_1, vmpasswd: Q1w2e3r4!, workprofile: {'IEbpm': 1 L, 'ARbpm': 1 L, "Thinktime": 2 L, "name": "StandardBenchmarkProfile_1i", "hosttime": 1, "random": 1, "iterations": 1 L, 'OMP': 60 L, 'video': 2 L, 'applist': ' WORD, ACROBAT, IE_APACHEDOC, EXCEL_SORT, 7ZIP} {, PPT, FIREFOX, OUTLOOK, IE_WEBALBUM, VIDEO '}, poolname: unknown, domain name: TMIOCONTROL
Wednesday, March 26, 2014 23:19:21 INFO by adding the callback function for the remote root object to ipaddr: 10.128.33.73
Wednesday, March 26, 2014 23:19:21 INFO added reminder for the command startWorkload on the client 10.128.33.73
Wednesday, March 26, 2014 23:21:02 INFO connection started from the client: 10.128.33.73I think the name conventions 'computer of office-{n}' and Office-{n}"may be causing the problem. Can you try just to office-{n} and go to View server, open a command prompt and then run "python c:\listener.pyc" and after the release?
-
Upgrade software HP D110 scans with apple, but does not complete scan
After all the things suggested, the printer/scanner will scan, shows me an overview, says has put images or work, but it does not appear there. Where the analysis? iMac OS 10.9.4, HP D110
Hi Gemini02
Thanks for your quick response. There are 2 missing pieces in your answer.
I need to change the "last printer used" default printer "HP Photosmart... »
then I needed to go to the image capture. Do the scan from there then click on & select by dragging the mouse over Preview, then confirm it. Then he would go to the place I had specified & this is.
I could not use image capture without default printer changing
TSSr
-
Siverlight I give permissions. How can I Lovefilm in this box, so I can use it to watch movies like this will not work in Loveilm.
Hi MayflyQT,
1. what browser do you use?
2. What is the exact error message that you receive?
You can follow this link & check if the problem persists:
https://www.LOVEFiLM.com/help/dyn_faqs.html?editorial_id=40849
Hope the helps of information.
-
JavaScript works with an alert, but does not work without it. Why?
This happened to me before, but I was able to solve my problem. Now I'm not.
Let me explain: I have a javascript function which I call when I double click on a line on a table:
[code]
function CallServ (evt) {} source var = evt.getSource (); AdfCustomEvent.queue (source, "call", { }, (false);
auxDblClick.call (this, source); } function auxDblClick (CBC) {} split var = src.toString () .split ('='); var idButton = split [1]; var split2 = idButton.split(':'); okButton = split2 var [0].concat(':'); for (var i = 1; i & lt; (split2.length - 1); i ++) {} okButton = okButton.concat (split2 [i], ' :');) } okButton = okButton.concat ('dc_cb1'); var comp = AdfPage.PAGE.findComponent (okButton); Alert (COMP); AdfActionEvent.queue (comp, comp.getPartialSubmit ()); }
[/ code]
As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.
I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.
So, why the function working with alert, but does not work with the alert off the coast? What Miss me?
P.S: jdev version 11.1.2.4.0I found the solution:
Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:
var t = document.getElementById (okButton); t.Focus (); Now everything works fine
-
I want to turn on my system with GPO restore
Hello
I want to turn on my system with GPO restore, we use windows 7.
some computers in our area shuts the system restore.
Is there a solution to enable the restoration of the system using GPO?
brgds
Dannebrog IT
You are in the XP Forum and must be in the Windows 7 forum that is here:
http://social.answers.Microsoft.com/forums/en-us/group/WindowsAnswers
Under XP, I know not how to solve the problem of the "restoration of the system disabled by group policy" and these problems are the result of malicious software (unless someone really disable your SR with Group Policy). Yor malware scanning programs are unlikely to fix it either.
Why do you think that your SR has been disabled with GPO?
In XP, the problem is one or both of these registry keys has been created/activated:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore\DisableConfig
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\SystemRestore\DisableSR
In XP, you can set their values to 0 (zero), or simply delete the key DisableConfg and DisableSR entirely. That will fix the immediate symptom of the problem, but does not relieve your system of malware that has brought the State (the real problem).
If this is the case for you, what do you use for malware protection you will not disappoint.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.
What you want to replicate from El Capitan in Yosemite?
- The file containing all the samples stored color of the Apple color picker?
- The color picker itself?
- Both?
Question 1 is a simple transfer of a single file.
- From the Finder, press shift + cmd + G keys to go to the folder. Copy and paste the following in this dialog box:
~/Library/colors - The file has your stored color swatch is: NSColorPanelSwatches.plist
- On Yosemite, quit Word, Pages and other applications that use the Apple color chart
- Repeat step 1 on your machine of Yosemite
- Rename (do not remove) the Yosemite NSColorPanelSwatches.plist existing NSColorPanelSwatches.plist.old
- Copy the color swatch file El Capitan in Yosemite file location
- Launch the applications that use the color chart to see Apple El Capitan from swatches.
-
iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help
iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help
Welcome to the Apple community.
If you don't remember the password, reset it to...
-
I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.
Original title: ipod
You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)
See also - http://support.apple.com/kb/TS1363
It will be useful.
-
I want to use makeup but Lightroom CC doesn't have the old menu dropdown to select. When I tried to click on "Reset of the Lightroom settings" to restore the old presets, it did not work. Help!
You must click on the Option where it says 'Black' and then you will be able to select soften the skin.
-
Disk Defragmenter does not open in Windows 7
Since I started using Norton, Disk Defragmenter does not work and my computer is very slow. How can I me Defrag to work and to speed up my computer?
There are 2 issues here:
1 Defragmenter does not
2 PC is slow.If the disk is very fragmented, it can cause the PC to run poorly, so let's handle defrag first and then we can look at the additional steps to speed it up.
There are several reasons why the built-in Defragmenter may not work correctly:
1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.
2. the disc is damaged and must be repaired. Solution:
a. open "My computer" and right-click on the drive that you want to disable frag.
b. Select 'Properties' and click on 'tools '.
c. Select "Check now" to check the drive for errors.
d. Select the two options and click on 'start '.(This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).
3. There may be malware on the PC
Solution - run the Antivrus, then Antispyware scans (can take a long time if ever made. Be patient):
a. analysis of the entire system with the anti-virus & manage everything that exists;
b. analysis of the entire system with Anti-Spyware & manage everything that exists;4. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:
a. start - all programs - Accessories - System Tools - System Restore (click here to open);
b. Select a good restore point before you start having problems with Disk Defragmenter.
c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").5. There are other programs that run the Defragmenter interruption integrated. Solution:
a. close all running programs.
b. If you think there may be some programs that run in the background.
c. press Ctrl + Alt + Delete and
d. Select "start Task Manager".
e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."6. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).
7. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with it in standard mode and stalking the interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.
8. Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.
There are several ways to re - install the built-in Defragmenter:
A:
a. open the menu 'start '.
b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
c. in the window that opens, find the file named "dfrg.inf.
d. right-click on "dfrg.inf" and "install".B:
a. go into "start > run" on your computer.
b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
3. click 'OK' to make the program automatically reinstall itself.C:
a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.Most of the problems will be resolved in #6 above, but if not and if your windows installation is otherwise works well, consider downloading a free trial of a commercial defragmentation tool rather than the drastic measures to restore the frame-s functionality.
Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.
Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...9 here is a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:
http://Disk-Defragmenter-software-review.TopTenReviews.com/
a. Select a program and install it. The best defrag programs are automatic and the top placers in the foregoing analysis can defragment everything using the PC. Place it at the top of the page was the only defragmentation program preventing fragmentation (see comment).
b, readers to defragment your drive.The PC should improve speed, as the above steps are performed. Here are additional steps to optimize PC for speed:
10. make sure that your PC has as much memory (RAM) as possible.
Solution - Know how much RAM your PC:
a. go to start > right click on 'Computer' > properties
b. this list the type of processor and speed and how much RAM is installed, and what version of windows is running and the Service Pack. Sign it, because it may be necessary later.
c. search your PC name and model # followed by 'memory' and see what is listed. This tells you what type of memory you need and how many "Sticks" your PC will accept.
d. get the maximum amount of memory your computer can contain and install it. Search for "how to install memory on one (your model name and #)" to find videos on how to do this if necessary.11. make sure that the registry is clean.
Solution: Get and run a good registry cleaner.
a. check to see if there is a registry cleaner already in the system;
b. otherwise, download CCleaner here: http://download.cnet.com/ccleaner/
c. run the registry cleaner until he finds and corrects any errors.Note: Be careful with registry cleaners as there are many autour with new ones coming all the time with some would have been causing more damage than they help. Use a proven reliability.
CCleaner is one of the originals and very safe.
Once all this is done, your PC will be in the best possible shape.
Good luck and let us know if you have any questions (ask your questions and I will then answer best I can).
Bill R TechSpec
PS: If after all that, the PC is still not doing well, repair may involve repairing the windows installation and possibly re - install windows itself. These aren't simple solutions. If so, indicate if and guidelines can be provided.
.. -
How can I check my backup burned restore disc filled properly or does not?
How can I check my backup burned restore disc filled properly or does not? He ran for 12 hours. My info is about 117 GB. He did not say, he just says no longer copy of backup disk in the process. I think 12 hours is a long time without a full review. When my hard drive failed after six months, my copy, I did not restore anything. More many times I tried to make a record to get an error just before the end. I want to be on the safe side. I don't have an installation disc since I bought this laptop pre-programmed Walmart. It is Vista Basic, so I'm out of luck if I have to redo the system and programs.
Hello
I suggest you follow the link and check.
Maybe you are looking for
-
Cannot delete Photos of iPhone 5 c device
title says it all, does anyone have the same problem? im running the latest iOS that I tried to remove some photos on my camera when I hit delete (the Trash button) it will just freeze
-
How to uninstall this upgrade. The old version was 3.6.something (I can't open FF to see). The upgrade will not work with this OS.
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
-
How to activate the screen of welcome and fast user switch client services for netware
How to activate the screen of welcome and fast user switch client Services for NetWare... How to restore and step to uninstall client services for netware
-
I have a Pavilion a1720n office computer that uses Vista Home premium OS. It has USB and USB2 ports. I plan to buy an external hard drive USB 3, thinking that my next computer will have the capacity of USB 3. In the meantime, is my computer a1720n li