UCS B service health profile: inoperable and my front-end server of red lights.
Hi all
UCS B service health profile: inoperable and my front-end server of red lights.
Description: health: inoperable
ID; 225695
type equipment
cause: equipment inoperable
Code: F0317
I do this, the major is not OK. but the server is good work
fltComputePhysicalInoperable
Error code: F0317
Message
Server [id] (see service profile: [assignedToDn]) health: [operation] Server [chassisId] / [slotId] (see service profile: [assignedToDn]) health: [operation]
Explanation
This error occurs generally when the server has encountered an error diagnostic.
Recommended action
If you see this error, perform the following actions:
Step 1 If the error occurs in the Cisco UCS Manager GUI, capture one or more screenshots of the error message and to other related areas.
Step 2 Check the results of the POST to the server. In Cisco UCS Manager GUI, you can access the general tab for the server POST results. Cisco UCS Manager CLI, you can access the POST results via the post command show under the scope of the server.
Step 3 Though theserver.
Step 4 If the actions above has not resolved the problem, run the command of technical support see the and contact Cisco Technical Support.
fault doct
http://www.Cisco.com/en/us/docs/unified_computing/UCS/TS/faults/reference/UCS_SEMs.html
What theis question?
Hello
Please open a TAC SR to get replaced for server 1/1 CMOS battery. After that you replace, alerts inoperable see service profile would also get cleared out.
Padma
Tags: Cisco DataCenter
Similar Questions
-
BlackBerry 8900 smartphones will be no more power up and a red light blinks!
I have a new 8900 and put in place all OK. It now will not power and all I have is the red light flashes intermittently. Have tried removing the battery but no joy.
Someone at - it ideas please?
If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.
(1) make sure that you have Blackberry Desktop Manager installed.
http://NA.BlackBerry.com/eng/services/desktop/
(2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):'c:\program files\common research in motion\apploader\loader.exe' /nojvm
(3) the Application Loader Wizard will appear - click on "next".
(4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
(5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track. -
the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-coreHi ravichandrans36,
Thank you for using Microsoft Windows forum.
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
To resolve this issue, follow these steps:
1 delete the profile by using the computer properties dialog box. To do this, follow these steps:
a. Click Start, right-click computer and then click Properties.
b. click on change settings.
c. in the System Properties dialog box, click the Advanced tab.
d. under user profiles, click settings.
e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
2. Click Start, type regedit in the start search box and then press ENTER.3. Locate, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList4 right-click the SID that you want to delete and then click on remove.
5 log on to the computer and create a new profile.
For more information, see: http://support.microsoft.com/kb/947215
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Kind regards
Aziz Nadeem - Microsoft Support -
I can not connect to. Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Can someone please help soon, I have to finish a project that I can't do without my files. I tried several times to log in to my user account, but it keeps showing an error message. I typed my password and the message is "service user profile Service has no logon. User profile cannot be loaded. I tried to restart my computer, the file sharing with another person on this computer to try to access my files, but nothing seemed to work. It just happened all of a sudden, yesterday I was on the computer and turn off the computer for the first time in a while. Before as I would just close the laptop, so I would not waste time log. But today I tried to open a session and received an error message and I can't connect to my user profile. Help, please!
Hello
· You did recently changes to your configuration?
Try to follow this link: http://support.microsoft.com/kb/947215
-
I created a new Admin account and when I went to her, I got the message:
"The service user profile Service has no logon. The user profile Service failed to load.
What's up with that?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
I had the same problem. Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked. Then I reinforced to the back and looked at the whole picture. It turns out that it wasn't a computer after all problem but a question of the user. Under folder C:/users/default in the end I managed to delete all subfolders except appdata. So when you went to create a new user he could not find the correct files to copy to the new profile to store information in. To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine. Of course I could create my comments and new users account once again. Finally. -
Re: Satellite C660-242 - "the service user profile Service has no logon.
By turning on the laptop the following message when you try to enter the password
"The service user profile Service has no logon.
"Unable to load the user profile.Hello
Check http://support.microsoft.com/kb/947215 and post comments to the first Microsoft document on this issue.
-
Log the user in the section problems - the service user profile service has no logon
Hello
Every time I try and log on to the laptop computer, the following message is displayed.
"The service user profile Service has no logon.
Unable to load the user's profile.other profiles can be connected without any problems.
If you can help that would be great
See you soon
Check http://support.microsoft.com/kb/947215
Maybe this can help you. -
Could not connect to the service user profile Service.
I have a little disconcerting problem. Every day or two, I can not connect to Windows correctly. When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:
"Unable to connect to a windows service.
Windows could not connect to the service user profile Service.
This problem prevents limited users to logon to the system.
As an administrator, you can review... »Shortly after this message, I get a windows error message saying:
"Location is not available.
C:\Windows\system32\config\systemprofile\Desktop is not accessible.
Access is denied. »This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.
While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.
I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."
I'm not sure what that means at all, but I hope that one of you people can help.
Thank you!
Hello any Leafs fan,
Thanks for posting on the Microsoft answers Forum.
Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.
Usually, when the above error occurs, it is due to a corrupt user profile.
The best way to fix this is to remove the user profile.- Go to the Start button
- Right click on computer
- Go to the properties
- Go to Advanced System Properties on the left pane
- Select the Advanced tab
- Go to the user profile Section and click on the settings button
- Find the profile for the
that you want to remove and click Remove. (It's the best way to remove the local profile in Windows Vista). - Connection again and you will get a new profile.
- To get your Favorites return, go to the old profile in C:\users and copy the data manually.
The only way to identify what caused the error with the user profile is to try to reproduce it.
If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.
If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.
You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.Please post with your results and if you need further assistance.
Sincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
not able to load my 1st admin. The user's profile, every time I try to load the message appears "the failure of the service USER PROFILE SERVICE to open a session. I tried some of those ways, but nothing happens. Please help me with this problem...
1. reboot your computer and press F8 multiple times until you see a menu similar screen, if you see the Windows startup screen, then repeat this step2. highlight and press enter on Mode safe mode with command prompt. Try to connect to it. If it still does not work, proceed to step173. If you are able to connect, once the command prompt appears, type: net user administrator Word of past / active: Yes (you can specify the password for the administrator account.)4. If you get a message "the command completed successfully" and then restart your computer by typing: shutdown - r5. start again by pressing F8, but this time choose just the SafeMode.6. you will be able to log in as administrator with the password set in step 37 hit (windows logo) + r.8. type regedit9. once the Registry Editor opens, search for HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList10. in the left pane, find the one that begins with S-1-5... and ends with. BAK; If you can't find one, go to step 1511 right-click and click Rename, and then change it. TO BAK. BK12 right-click with the same numbering but without the. BAK and Add. BAK add at the end13. right click on the one that you have renamed in BK and clickRename, remove the. BK14. Subsequently, you have activated the. BAK to the end of the second entry in the first. That should probably fix your problem.15. If you do not find one. BAK then try this: open Explorer Windows for C:\Users\Default\AppData\Local\Application data16. If you find an other Application Data below the one you are on, and then delete. Who should probably also solve your problem.17. If you can not log in Mode safe mode, restart and press F8 until you see the menu again, and then press enter highlightingRepair your computer18 wait for all the Windows files to finish loading, then hitNext when it asks for the language of the keyboard.19. try to connect here also, choose your username in the menu drop-down, type the password, then go to step 2320. If it still doesn't work, then if you still have your Windows installation CD, put it in, and then restart your computer.21. press F12 until you see a menu of boot options, choose boot from CD22. the language of the keyboard and then click Next. Find repair your computer for a little below the center-left.23. choose Open command prompt and type: net user administrator / Active: Yes password (here again you can specify a password)24. close the command prompt and click on restart and go to step 5 "Here's a Fixit for cause of you, so that you don't have to do it yourself:
http://support.Microsoft.com/kb/947215
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
"The service user profile Service has no logon. User profile cannot be loaded. »
When I try to log on to my site its tell me what; "The service user profile Service has no logon. User profile cannot be loaded. »
Hello cockateils8,
Thank you for visiting the website of Microsoft Windows Vista Community.
Try the rest of the stage in this article:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
To resolve this issue, follow these steps:
- Delete the profile by using the computer properties dialog box. To do this, follow these steps:
- Click Start, right-click computer and then click Properties.
- Click on change settings.
- In the System Properties dialog box, click the Advanced tab.
- Under user profiles, click settings.
- In the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
- Click Start, type regedit in the start search box, and then press ENTER.
- Search for, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList - Right-click the SID that you want to delete and then click on remove.
- Log on to the computer and create a new profile.
Pasted from http://support.microsoft.com/kb/947215>
This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. - Delete the profile by using the computer properties dialog box. To do this, follow these steps:
-
Original title: cannot open a session
I get the message "the service user profile Service has no logon. User profile cannot be loaded. "I can't get on my computer. What can I do? Help, please! I need to get the work done.
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I can't log on to my laptop. I get the message "the service user profile Service has no logon. User profile cannot be loaded. "Can anyone help?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
Satellite L300-19Y - wireless LAN is not in the list of devices
Hi I need to throw this one out there incase I throw my pc a bridge... I have a Toshiba Satellite L300-19Y which recently gubbed the HD, so I replaced and am trying to install XP SP3. However, even with what i belive to be the correct drivers I can't
-
restore or save files not here say.
Original title: windows vista. Someone please help me my son has screwed up with the scores of his laptop and some how deteled the recovery partition on it so now when I try and do a restore or backup it says files not there also a new installation i
-
Try to send a photo by e-mail on Picasa, the message comes back that they don't recognize or accept Internet Explorer - that is what I have. Makes no sense.
-
list with separators as options
Hello I really need help to draw a separator between list items and add the icon at the beginning. IM desperate please help Thank you
-
Essbase calc script to determine the number of occurrence
Hellois it possible within a calc script to determine the number of occurrence of a value in the account dimension?I have an account called ranks which can contain any value between 1 and 10. I would like to know how many times each value is repeate