UCSM showing the reason: NHS source pinning failed.
Hello
I have UCSM 2.2.3g and B200M4 with UCS FI 6248.
I'm getting NHS source pinning is not...
How can I solve this problem...
Please see attached screenshot for details...
Unless you configure VLAN disjoint, all the VLANS defined on UCS FI are included automatically in the trunks ethernet to the North; nothing special to do.
See also
http://ciscoquicklinks.com/Tip-Datacenter-UCS-uplink-port-configuration-...
Tags: Cisco DataCenter
Similar Questions
-
CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.
What am I supposed to do?
Thank you, Carlo Romano
Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.
Thanks a lot for the quick reply anyway.
Carlo
-
Edit event managed by this case in LabVIEW 2013 shows not specifiers of the event, Event Sources and events on screen resolution 800 x 600.
As far as I know, the list of supported resolutions is determined solely by the graphics card. It is possible that one used by the PC supports only 800 x 600 as maximum resolution, even if you plug an external monitor.
Like Dennis suggested, the recommended option would probably be to develop on another PC and only deploy an executable for the industrial PC. That's what we do with our systems (although not because of this problem, but because it makes sense. There absolutely no need to have the IDE installed in most of our systems).
Other options:
- See if you can get an update of the driver from the manufacturer to solve this problem.
- Plug a USB Monitor with its own driver.
- Try to hide the taskbar and make the smaller title bar in the hope that the bug manifests.
- Try remote access in the PC. I think that some remote access programs allow you to specify custom resolutions that are not affected by the original drivers. Remote Desktop seems to be a likely this option even if it has been awhile since I've used it.
- Check the BIOS. I saw at least one industrial PC where there was some settings in the BIOS to control the resolution, but I don't remember the details, and it was quite limited. I think that in this case, you can change the resolution, but then the image does not fill the entire screen.
-
The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.
I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
What is the reason for closing OAV46981 Bug 17911277 AVCLI REGISTRY firewall FAILED
Hello
I encountered a problem during the registration of a dbfirewall with a vault of Audit Server. both run on different servers 12.1.2.3.0 (vbox would be that this is a test)
the error I get is:
FVO-46981: unable to connect to the database with the 10.10.10.90 IP firewall. ORA-06512: at "AVSYS. ADM", line 4 ORA-06512: 'management. RA", line 355 ORA-29273: failure of the request HTTP ORA-06512: at"SYS." UTL_HTTP", line 1130 ORA-29024: certificate validation failure
So it seems to start with the CESTAMP failed validation
I found Bug 17911277 OAV46981 AVCLI firewall REGISTRY FAILS, but apparently not closed a bug (status 92) and I can see why (because the lines that explain it do not appear for me).
someone has encountered this before and found out the reason?
Thank you and best regards,
André
You can check the time of the AV and FW servers?
If they are not synchronized, you can get in this situation.
-
My Lightroom does not. It is showing the message - failed to open the Lightroom catalog called Catalog Lightroom because it is too new to be used by this version of Lightroom. You want to select a different catalog?
It is a catalog that you created on your computer, or coming from another computer?
If it is one that has been created on your computer, you can search your computer to see if you have two different versions of Lightroom installed. If so, then you want to open the new version of Lightroom by double-clicking its icon, and then you should be able to open the catalog.
-
I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.
Hi Rahel,
Please see Creative Coud connection errors
Hope that helps!
Kind regards
Sheena
-
How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?
Like I can't pin, I keep it at the top of the page with scroll effect 0.
It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.
Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.
-
Windows xp. Installed from administrator. Receipt module upgrade issues.
On WinXP + Firefox 4 versions show the default Menu, Vista and Win7 don't.
View > toolbars - Bar Menu = uncheck it
-
Could not find the ORA error behind this failed task
Hi friends,
In the part of the load, I got a task that failed following two as
I found the log file for the task that has failed two above to the location (D > orahome > 10gR3_1 > bifoundation > dac > Journal)SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive
For, SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive I found the newspaper below
For SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive I found the newspaper belowAll Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.625 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_GL_ACCOUNT_D W_ORA_GLREVAGGR_F_TMP W_ORA_GROUP_ACCOUNT_NUM_D_TMP W_ORA_GL_REVN_GL_F_TMP Target: "BIAPPS" Tables: W_GL_REVN_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_GL_REVN_FS:BIAPPS) TRUNCATE TABLE W_GL_REVN_FS "Truncate" for W_GL_REVN_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.75 SDE_ORA_Stage_Reverse_GLRevenueFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_GL_REVN_FS ------------------------------ 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has started. Successfully executed : TRUNCATE TABLE:W_GL_REVN_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_GL_REVN_FS 2012-07-30 16:17:12.828 TRUNCATE TABLE:W_GL_REVN_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:12.843 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_GLRevenueFact_DiffManDerive] will be failed.] Workflow run id [2233]. Start time: [Mon Jul 30 16:17:18 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_GLRevenueFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_GLRevenueFact_DiffManDerive.txt SDE_ORA_Stage_GLRevenueFact_DiffManDerive 2012-07-30 16:17:40.109 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_GLRevenueFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_GL_REVN_FS ------------------------------ Not Executed ------------------------------
But the error, I couldn't analyze the exact ORA error of the foregoing two session that does not. Can you friends, help me with the cause of this error so that I can recitfy this inorder to errors for my task failed to run correctly.All Task Batches Preceding Actions ------------------------------ SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template ------------------------------ 2012-07-30 16:17:12.703 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has started. Running Custom Sql list SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template Source: "BIAPPS" Tables: W_ORA_AR_XACTS_GL_F_TMP W_ORA_ARAGGR_F_TMP Target: "BIAPPS" Tables: W_AR_XACT_FS Default retries for this custom SQL is 1. executing sql (Truncate:W_AR_XACT_FS:BIAPPS) TRUNCATE TABLE W_AR_XACT_FS "Truncate" for W_AR_XACT_FS succeeded on "BIAPPS" Succeeded Successfully executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template (Number of retries : 1) Commands executed : SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template 2012-07-30 16:17:12.968 SDE_ORA_Stage_Reverse_ARTransactionFact_DiffManDerive:PRECEDING_ACTION:"Truncate Target Table" template has finished execution with Completed status. ------------------------------ Truncate Batch ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ Informatica Session Batch Upon Failure Restart Actions ------------------------------ TRUNCATE TABLE:W_AR_XACT_FS ------------------------------ 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has started. Successfully executed : TRUNCATE TABLE:W_AR_XACT_FS (Number of retries : 1) Commands executed : TRUNCATE TABLE W_AR_XACT_FS 2012-07-30 16:17:13.0 TRUNCATE TABLE:W_AR_XACT_FS has finished execution with Completed status. ------------------------------ ------------------------------ INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) ------------------------------ 2012-07-30 16:17:13.0 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) MESSAGE::: Irrecoverable Error pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive Status Desc : Failed WorkFlowMessage : ===================================== STD OUTPUT ===================================== Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], Windows 32-bit Copyright (c) Informatica Corporation 1994 - 2009 All Rights Reserved. Invoked at Mon Jul 30 16:17:39 2012 Connected to Integration Service: [Oracle_BI_DW_Base_Integration_Service]. Integration Service status: [Running] Integration Service startup time: [Sun Jul 29 10:41:49 2012] Integration Service current time: [Mon Jul 30 16:17:39 2012] Folder: [SDE_ORA11510_Adaptor] Workflow: [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] version [1]. Workflow run status: [Failed] Workflow run error code: [36331] Workflow run error message: [WARNING: Session task instance [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_Stage_ARTransactionFact_DiffManDerive] will be failed.] Workflow run id [2236]. Start time: [Mon Jul 30 16:17:19 2012] End time: [Mon Jul 30 16:17:24 2012] Workflow log file: [D:\Informatica\PowerCenter8.6.1\server\infa_shared\WorkflowLogs\SDE_ORA_Stage_ARTransactionFact_DiffManDerive.log] Workflow run type: [User request] Run workflow as user: [Administrator] Run workflow with Impersonated OSProfile in domain: [] Integration Service: [Oracle_BI_DW_Base_Integration_Service] Disconnecting from Integration Service Completed at Mon Jul 30 16:17:39 2012 ===================================== ERROR OUTPUT ===================================== Error Message : Unknown reason for error code 36331 ErrorCode : 36331 EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183) com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307) com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214) com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586) com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441) java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303) java.util.concurrent.FutureTask.run(FutureTask.java:138) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907) java.lang.Thread.run(Thread.java:619) (Number of retries : 1) pmcmd startworkflow -sv Oracle_BI_DW_Base_Integration_Service -d Domain_BIAPPS -u Administrator -p **** -f SDE_ORA11510_Adaptor -lpf D:\Informatica\PowerCenter8.6.1\server\infa_shared\SrcFiles\\BIAPPS.BIAPPS.SDE_ORA11510_Adaptor.SDE_ORA_Stage_ARTransactionFact_DiffManDerive.txt SDE_ORA_Stage_ARTransactionFact_DiffManDerive 2012-07-30 16:17:40.453 INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_Stage_ARTransactionFact_DiffManDerive:(Source : FULL Target : FULL) has finished execution with Failed status. ------------------------------ Analyze Table Batch ------------------------------ ANALYZE TABLE:W_AR_XACT_FS ------------------------------ Not Executed ------------------------------
Thanks in advance.
Kind regards
Saromeans that 'If this task fails that be parent' if the session fails, you're in the failure of the workflow state. DAC knows only the workflow state.
If you run the workflow in WFM, mark the task as completed in DAC.Tasks of children (Drop, Create, Informatica) DAC-> current Run-> in the lower pane, select all tasks, and then click the Details button
a pop window shows the list of tasks if exists elsewhere only a task will show you that is task Informatica.Right-click on the task-> update records-> (the State of the list Select)
Hope this helps
-
My Mozilla Firefox is a little buggy! What could be the reason?
My Mozilla Firefox behaves weird lately. I don't know how to explain this while I posted a picture below. This product only when I opened two or more TABS. When a tab is open, everything seems fine. But when I open another tab, I can see small squares that change their position and show especially in the navigation toolbar, but sometimes also in the browser (as in this case).
I have no idea what this could be. I tried to update my Firefox, that completely uninstall and install everything from scratch. Nothing has changed.
It does not appear in Internet Explorer 11 or in latest Chrome but only in Firefox.
I guess that's maybe another program which is associated with Firefox, but I can't find the solution.
If anyone has had a similar experience, please let me know how you solved it.
PS hope you can see in this photo the little squares. I scored the with the Red arrows.
I already tried to solve this problem and asked for help via Stack Overflow, but impossible to find the solution. Here is a link to my question here: http://stackoverflow.com/questions/29448005/my-mozilla-firefox-is-kinda-buggy-what-could-be-the-reason
I really hope someone can help me solve this problem. I love Firefox and do not want to use other browsers, but these bugs are so boring! Help, please.
Time to do some basic troubleshooting to locate your customizations (or combination of mods) which is causing that.
Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
If Firefox does not work, you can start Firefox in Mode safe as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- Click the menu button
-
map does not show the routes and directions
This feature is not yet supported in India.
http://www.Apple.com/in/iOS/feature-availability/#maps-directions
In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.
Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.
-
Everytime I try sending mail through Gmail FF 18.1, I constantly get the error message "you action failed. Please try again ". I have to use the HTML view in Gmail that I really hate. I tried the Mode without failure of Firefox as well but not good. Please fix this for me.
This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
If clearing cookies doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.
-
- Installed Firefox 9
- I am running Windows 7 64 bit
- I have Firefox pinned to the taskbar.
- When Firefox opens, there is a new icon which opens onto the bar spots. Normally Firefox would open within the icon that is pinned to the taskbar.
- When I close Firefox, the extra icon disappears.
- Firefox is acting like the icon that is pinned to the taskbar isn't still there.
Before performing the steps below, I suggest strongly that visit you the last known issues for the current version, specifically 9 FF release notes.
See:
1 detach the old firefox icon
2. go in c:\Program File (x 86) \Mozilla Firefox\
3. double-click on "firefox.exe" (window FF & icon will appear in supertaskbar)
4 pin this new icon by right-clicking > Pin to Taskbar (Firefox icon turns into white box)
5. make sure you can see hidden folders
windows.microsoft.com/en-US/windows7/Show-hidden-files
6. go on C:\Users\%yourusername%\AppData\Local
7 remove "IconCache.db.
8. open the Task Manager
9. kill explorer.exe by clicking on complete the process
10. in the Task Manager, file-> new task (run...) -> write "explorer.exe" without the quotes, press ok
-
What happened to the option View / Source? I used it all the time
How you look at the source code (HTML) for the page now that you have removed the option View/Source. I am now using Chrome for this reason...
Use one of them:
- Firefox > Web Developer > Page Source
- Tools > Web Developer > Page Source
- Right-click on a web page to open the shortcut menu and select the Source of the Page
Maybe you are looking for
-
How can I remove the design of the flag behind my navigation tabs?
Today, the Firefox home page asked if I wanted to put my country's flag in the menu bar or the toolbar (I don't know which). The change is applied, but I want to go back. I can't figure out how. The splatters of paint are totally entertaining and I c
-
I have to make my laptop faster
I bought this laptop last year on Thanksgiving day. I still love it, but its giving me problems. I was pushing it to its limits in recent times in performance and its been, for the most part, work with me. But I plan to soon go even further in the pe
-
Try to run a 'error checking' and 'defragmentation' on my computer
Hello My computer was slow, so I would like to run a 'error checking' and 'Defragmentation '. When I try to run the "error checking" I get the following message: "the disk check cannot be performed because the disk check utility needs exclusive acces
-
Remove a printing device ENTIRELY
I'm in "Control Panel > hardware and sound > devices and printers» When I try to remove a printer, the printer icon with the listed remains. I'm doing a right click > delete device. How to COMPLETELY remove this device? It is not marked as default
-
How to upgrade field flex on a human task data?
After entering a human task and assign the data how to update flex data on the ground while the task is always affected. I use the services of the task to communicate with the task and the filters apply according to the field of flex.I want to update