UEFI does not not after HDD SSD

Similar Questions

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• G7-1368dx Pavilion: Pavilion G7-1368dx does not recognize my ssd.

  I have problems to an ssd added to my computer.

  I tried two more different: 530) 1 Intel series-256 GB and 2) Crucial Mx100 - 512 GB.

  The Crucial drive is the one recommended by the tool of their compatibility.

  I tried calling HP support but everything what they told me was that my computer does not support an ssd and I think they're wrong, as I read messages like this http://h30434.www3.hp.com/t5/Notebook-Hardware/Does-HP-G7-1368DX-support-SATA-III/td-p/2798639http: /...  where Sergiy already has one installed and works.

  I tried several different softwares, tried tried cloning backup all seem to succeed but the when the drive is installed and I try to start I do not found disk errors.

  I also tried to use HP restore disks that I created with the HP recovery tool, they are unable to find the drive either. Even an iso of Win7 directly downloaded Microsoft can't find it.

  Thanks in advance.

  This is to help nothing else out there if they have a similar problem with ssd is not seen on the hdd0 port, but that a regular hdd works fine.

  Get a motherboard replacement for SATA cable. For some reason, one that came with my computer would see a normal hard drive, but not just any what SDS (I tried 4 different brands, so it wasn't a thing of brand).

  

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• y510p does not recognize the SSD to the first boot.

  I have a new y510p that I received this week. First thing I did was to replace the HD 1 TB with my own OCZ Vertex 4 256 GB SSD Drive.

  When I turn on the laptop for the first time, it does not find a bootable device (through network devices, then says no bootable device). If I use ctrl + alt + delete to restart the laptop, it detects the drive on its own and begins booting in Windows.

  I would like to understand why this does not work the first time? I went into the BIOS and I saw that it says that there is no hard drive detected.

  This worries me a bit, like maybe one day, he decided to no longer recognize the drive after the ctrl-alt-del?

  Everybody that experience and have a work around?

  Thank you!

  Hey Z,.

  I appreciate your response! That's actually what I thought as well. What is strange, this is even after the firmware update, it seems, the question was always present, but I just had my laptop for a while and it booted up and it starts right in Windows.

  I was thinking about it. On the first boot after the update of the firmware probably had some time to "finalize" the update of the firmware, firmware update require a power cycle.

  Maybe the firmware update solve the problem after all, and it only took an another start after the initial report so that it can work properly

  I guess my advice to anyone having the same problem with a disc OCZ Vertex 4 is to spend at least 1.5 firmware (which is what I am now, and it's working properly). Beware that OCZ 1.3-> 1.4 and 1.4-> 1.5 will destroy the data on the disk, so if that's your primary drive, back up everything.

  I'm glad it works now!

• Satellite L500 - 19 X does not after all liquid spill

  Hello

  Newbie here, pleased to meet you all.
  I got a Toshiba L500 19 X, who has a problem, the keyboard does not work, at all.

  This happened after a spillage, or so I thought.
  I fixed a few laptops which have been submitted to liquids, but this one is different.
  In this case the laptop works brilliantly, is not a problem except for the keyboard does not.

  I have attached an external usb k/b and it works perfectly. I stripped the laptop down to the mobo and there is no sign of a reversal of liquid.
  I use a large magnifying glass to inspect the Board, usually find something blow over, but does not in this case.

  Nevertheless I cleaned the mobo and everything seems fine. But the k/b will not work.
  I am come to the conclusion that the problem COULD be an update of the bios of electronics, or corrupt.

  I have d/load the latest version of the Bios, gaining 2.10, but when I go on install it tells me that the current bios is equal to or newer than the one I have d/load and flash will not take place.

  I come hat in hand, to help if possible, and to see if anyone has had the same problem.
  Maybe point me in the right direction.

  The bad news is that there is a problem with the motherboard.

  Any help or advice would be appreciated.
  Thank you in advance.

  > In this case the laptop doesn't work brilliantly, is not a problem except for the keyboard does not.
  > I have attached an external usb k/b and it works perfectly

  So you have a great chance looks like the motherboard is ok and the keyboard controller also works.
  Why is this a BIOS problem? The laptop worked perfectly in the past
  Therefore, in my opinion you should contact point of service allowed in your country and should replace the keyboard.
  In my opinion the problem of keyboard internal

• ThinkPad W520 - BIOS does not see mSATA SSD Samsung 850 EVO

  I bought a Samsung 850 EVO 1 TB - my W520 mSATA SSD does not see.

  This unit is compatible with the socket inside the W520 mSATA?

  And if not I can buy a controller mSATA?

  Thank you

  Everything works now - the reader was not sitting correctly

• Touchpad HP Pavilion 17 works does not after using an external wireless mouse

  I have the HP Pavilion 17 laptop.  It is running Windows 8.1.  Everything worked fine until I used an external wireless mouse.  After unplugging the mouse the touchpad does not itself again.  I have therefore no pointer and no touchpad to use unless I have keep the external mouse not connected.  I tried the hard reset with the plug of the battery, unplugging, pressing the power button for 15 seconds and turning everything back on.  Still no work touchpad.  Had this happen last week and called HP because I only had the laptop for 3 days at this time here.  They had me do a system restore to an earlier point.  At this point, everything worked again and I toilet problem has been resolved.  This is why I used the external mouse always thinking that it wouldn't be a problem.  I was wrong.

  Also, I've seen other posts on a different notebook that has a toggle power button in the upper left corner of the touchpad to activate/disengage, but this was not one of these.

  Any help would be greatly appreciated.  My next step is to call HP again tomorrow and see if someone else has another solution.  I would obviously like the ability to use the touch pad or external mouse at any time without having to restart and go through all these other problems.  Otherwise, this phone pretty may be going back to the store this weekend.  :-)

  Thank you!!

  This fixed the problem! Thank you very much!! Seriously, 3 different phone calls to HP and not one of them ever talked about this easy solution!

• S104nl Pavilion X 360: disappointing with HP, no support forum and HP 800 euro x 360 convertible s104nl does not support the SSD!

  I'm sad and I am disappointed with HP because I have no support in this forum (two question http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Upgrade-to-SSD-in-my-new-HP-X36... and http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Hp-x360-s104nl-is-compatible-wi... ) and that my HP Pavilion x 360 s104nl of 800 convertible euro... does not support SSD!

  I've tested my new SSD with old Acer laptop, works perfectly, in my new HP x 360 is not recognized!

  Antonio

  First of all it is a user to User Forum. We do not work for HP and HP are not responsible for what is said or not said. Now a version of English language of your maintenance manual is not accessible. Closest I can find is the one that covers models up to 099 and is probably correct:

  Manual

  The x 360 is not really meant to be open and updated by end users and when the laptop was sold to you no one said or implied that change hard drive for one SSD has been supported or allowed while keeping the warranty. You a Crucial SSD of MX200 with no information saying it was compatible and decided to install it.

  Access the hard drive appears on page 29. Yes, any computer that uses a SATA hard disk can use a 2.5 inch SSD SATA. Function properly, but if there is a model that has given the most compatibility problems is the MX Crucial series. Do not know why. Chances are that a different SSD will work very well. My favorite is the Samsung 850 Evo. OCZ made a good whole as PNY and SanDisk.

  This is how I think that the best information that you're going to get. Let us know if you have more specific questions.

• sounds works does not after installing SP2

  Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

  Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

  --

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• iDrac7 does not after that some has no connections

  Our system has a few new servers R720 with Enterprise iDrac7. Today, I noticed that the iDrac7 IP does not respond (cannot ping, ssh, web GUI...) after three connections fail in the Web interface (I typed the wrong password). I had to unplug the power cord to reset the iDrac and open it again.

  IDrac factory firmware is 1.57.57. I tried to upgrade to the latest 1.66.65 but can not solve the problem.

  So, how I solve it?

  Kind regards

  Can you check IP blocked on iDRAC. You can check the setting "Settings-> network-> avancΘs iDRAC" iDRAC GUI page. Default iDRAC IP will be blocked for 10 minutes from the client if you type the wrong password 3 times in 60 seconds. You will be able to access the iDRAC of different customers during this period. You can access the customer even iDRAC after the penalty defined in the parameter.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Digitizer does not, after the update to windows 8

  Hello

  I bought myself a x 201 tablet a few months back, because I thought it would be great for taking notes during my studies. And I was right

  But after I upgraded my windows 7 to windows 8 when it was released last Friday, my scanner will not work correctly. It seems that the stylus is not really recognised as a pen. There is no pressure at all sensitivity, and clear with the back of it does not work either. It seems the wacom drivers aren't there.

  I tried to download various drivers for it and set up of the digitizer, but nothing seems to do the trick.

  Hope someone can help me, because I really need to be able to take digital notes soon.

  Back to the page of Wacom and download the scanner driver:

  http://www.Wacom.com/en/support/drivers

  Select tabletpc and win 7.