y510p does not recognize the SSD to the first boot.

Similar Questions

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• ITunes does not recognize the phone

  IPhone SE, Windows 10, update ITunes, McAfee

  Connect the phone to the computer and the window phone company recognizes the phone immediately.  I close the phone company of the window and open ITunes.  ITunes does not recognize the phone.  I have the menu bar, select file > currencies, all the options are greyed out.

  Disable McAfee, and then try again.

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Does not recognize the external HDD PH3100U-1EXB

  Here's my problem...
  I unplugged my hardrive ex the other night and he fell about 2 feet. Today, when I plugged in again, the computer does not recognize the device. I get the message "disk or network connection that the shortcut, Toshiba - HDD is unavailabale.»

  Ive tried to plug it into different usb ports without success. The worst thing is that ALL my photos are there, is there a way to recover the them.or I'm screwed?

  You can test it on another PC or laptop?
  Just to be sure it is not somehow connected to your PC at home.

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Satellite 1900 (PS192E) - does not recognize the CD/DVD

  Hey all,.

  I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

  When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

  If there is someone out there who could give me some advice, I would be extremely grateful.

  Thank you very much

  James

  Hello

  OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
  What version of Windows is it?

  If you want to install a driver for the graphics card go into Device Manager and select Update driver.