ui.key.chromeAccess & Ui.key.contentAccess ignored

Similar Questions

• Parameters key mappings ignorant fusion 6.0.1

  I'm running a Windows 8 VM in Fusion 6.0.1. When you use 5.x, I could disable all the mappings of keys in the preferences. For some reason, 6.0.1 ignores the fact that "Host Mac shortcuts" / "Enable Mac OS host Keybaord Shorts" and key mappings / enable key mappings are unchecked. Make a toggle Cmd - Tab between Fusion and Mac applications. By pressing Cmd - F translates into F3 in the virtual machine.

  How can I fix it? Why is 6.0.1 ignoring the preferences settings?

  Thanks in advance.

  Jim

  It did not work.

  However, I've just updated to merge new version 6.0.2 and that did fix my problem. They ignore are no longer the preferences / settings key mapping.

• Capture the key of the second keystroke

  I need to capture, the keyboard of the second sequence of keys (and ignore the premiera), I need to be '0' or '1' to start the movie.

  On first use, it works very well, but after that my film back to the beginning, the keys are not recognized more...

  Here's the script for this part. Maybe something is wrong with the way he ignores the first strike?

  import flash.events.KeyboardEvent;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, reactToKeys);

  function reactToKeys(keyEvent: KeyboardEvent): void {}

  If (barCodeFirst == 1) {}

  If (keyEvent.keyCode == 48) {}

  trace ("Zero");

  } ElseIf (keyEvent.keyCode == 49) {}

  trace ("One");

  } else {}

  trace ("nope");

  }

  } else {}

  (barCodeFirst = 1);

  }

  }

  Basic troubleshooting: paste a trace statement to the first line of the event handler to see if it is still running.

  Also, never use numbers to store the Boolean State. You should be setting barFirstCode to true, not 1.

• How to access the start menu? F10 is ignored. ESC is ignored.

  I have a HPE175z running a new installation of Windows 7 Home Premium.  I want to change the startup parameters.  When the system boots, the screen tells me that < F10 > give me access to the configuration.  F10 is completely ignored.  A message tells me later < ESC > will give me access to the Start Menu. < ESC > is also ignored.  Similarly, I have try all the keys are ignored - nothing interrupts the boot sequence.  How can I access the start menu?

  The problem is that no key during the boot stopped the boot process and allowing me to enter the installation or startup configuration.  I swapped keyboards and the problem disappeared.  Apparently, the keyboard did not have during the boot sequence.

  Thanks to all those who had a suggestion.

• Shortcut keyboard in the window preferably is not working in Firefox 38, he worked in 37

  I used to do Alt - O | Content | ALT + C to select the color... option

  But now it no longer works

  If you find the Shift + Alt keys too heavy, Firefox has a preference to change the accelerator 'accesskey' only Alt. However, this allows pages to anticipate on the accelerators to the menu bar (F, E, V, S, B, T, H), so if you use those often, it is not switching. If you are inclined to try, this article has more information: http://kb.mozillazine.org/Ui.key.contentAccess

  If you find that you cannot get used to the dialog box "in the tab" Preferences, there is a preference to return to the old style dialog box:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste pref and make a pause so that the list is filtered

  (3) double-click the preference browser.preferences.inContent to true to false

  Note: I don't know if that will ever be in Firefox or is a transitional device.

• Web search engine

  When I open a new browser and type something happens with funmoods as my search engine and I can't get rid of him help

  Video with the instructions to remove Funmoods, then choose your browser on the video screen for instructions on removing the search bar search engine and how to reset your home page, if necessary.

  • http://www.funmoods.com/English/FAQ#A6
  • See also articles 7 to 10 on this page.

  Reset your search from location bar:

  1. type of topic: config in your address bar, as type a web site address, and then press the Enter key
  2. ignore the warning and choose to continue
  3. in filter, type the keyword . URL
  4. in the lower part of the screen, if it is "BOLD" and shows "user", click on keyword. URL and choose "Reset".
  5. in filter, type Funmoods (also Facemoods)
  6. all elements of the lower part of the screen in "BOLD" and indicating "user", right-click and select "Reset".
  7. about: config tab
  8. See:
     • http://KB.mozillazine.org/about:config
     • http://KB.mozillazine.org/Location_Bar_search#Location_Bar_search_.28external_-_search_engine.29
     • http://KB.mozillazine.org/keyword.URL
     • http://www.techrena.NET/computers/address-bar-search-provider-Firefox/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Impossible to verify if the plugins are up to date

  Since May 4, 2012 about 6 hours EST (on 3 different computers) I get "sorry, we couldn't find the page or file you were looking for" when I click on the link "check to see if your plugins are up-to-date" through the page modules. It is the first time that I've ever met this problem... someone can help me with this? I've tried restarting Firefox, restart computers, cutting off the firewall, uninstall Firefox and reinstalling and so far none of them have worked. It is now Sunday, may 6, 2012 about 10: 30 EST and I was clicking that link several times every day to see if something new happens or fixed and so far it does not... I still see the same page. I'd appreciate if someone could help me to solve this problem very soon... Thanks for any help.

  This function seems to be broken (Windows, MAC, Linux) Firefox 12 (release), Firefox (Beta) and Firefox 14 13 (Aurora). A bug has been saved. You can watch the discussion of bug, but please don't post here -> https://bugzilla.mozilla.org/show_bug.cgi?id=752073

  Temporarily, you can go directly to the Plugin Check page by entering the following in your address-> https://www.mozilla.org/en-US/plugincheck/ bar only (you might consider Bookmarking that link)

  You can also change a hidden preference in Subject: config to correct the problem:

  1. See-> http://kb.mozillazine.org/About:config
  2. type of topic: config in your address bar, as type a web site address, and then press the Enter key
  3. ignore the warning and choose to continue
  4. Search = plugins.update.url
  5. in the lower part of the screen, right-click on the name of the option and click 'change '.
  6. Change the value for-> https://www.mozilla.org/%LOCALE%/plugincheck/ . This value changes OR
     • the http to https
     • The mozilla . com to mozilla . org
  7. about: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Update emergeny out 2012-05-04) (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• How to delete Babylon from my PC?

  Babylon itself added to my Firefox browser as a search engine. So if I type a search term in the URL window, Babylon is in place. I know it's a tracking device and he "found" me when I used their site for translation. BIG mistake! I uninstalled, deleted and then reinstalled FF and it's still there. How can I get rid of him?

  No bar search tools and search engine changes can take place by downloading and installing the software. usually "" free software from the internet. Babylon can be downloaded and installed alone or in a "ride-along" in the installation/update of some software from the internet. Always look for during installation to uncheck the boxes that will install 'ride-along' the items you want. Installation of Firefox does not include these elements 'ride-along '.

  1. Delete the Babylon Toolbar (if you have it installed). The most complete elimination is to remove it from your system by using the control panel (Windows) > Add / Remove Programs): http://kb.mozillazine.org/Uninstalling_toolbars#Uninstalling_via_Windows_Control_Panel
     • See also:
       • http://support.Mozilla.com/en-us/KB/uninstalling+Add-ons
       • http://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on
       • http://KB.mozillazine.org/Uninstalling_toolbars
  2. Reset your homepage (if the Babylon Search page appears when you start Firefox): http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
     • You can restore the default value by clicking on "Restore default" options > general > startup > homepage. Be sure to set the "Firefox start" to 'Show my home page' on that same panel.
  3. Reset your address bar search engine (if type a few words in the URL/address bar takes you in the search of Babylon):
     • type of topic: config in your address bar, as type a web site address, and then press the Enter key
     • ignore the warning and choose to continue
     • in filter, type the keyword . URL
     • in the lower part of the screen, if it is "BOLD" and shows "user", click on keyword. URL and choose "Reset".
     • in filter, type babylon
     • all elements of the lower part of the screen in "BOLD" and indicating "user", right-click and select "Reset".
     • about: config tab
     • See:
       • http://KB.mozillazine.org/about:config
       • http://KB.mozillazine.org/Location_Bar_search#Location_Bar_search_.28external_-_search_engine.29
       • http://KB.mozillazine.org/keyword.URL
       • http://www.techrena.NET/computers/address-bar-search-provider-Firefox/
  4. If Babylon appears in your search bar, and you want to remove it:
     • https://support.Mozilla.com/en-us/KB/search%20bar

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite Pro L Series - lack of strikes

  I have a Satellite Pro L Series with keyboard, mouse, etc. connected via a Toshiba "USB 2.0 Port Replicator II". When I use the keyboard, occasional keys are ignored (so I have to go back after you type anything to insert strikes ' % is). Also, from time to time a key combination is repeated constantly until I intervene to stop it.

  This does not occur when I use the computer without the port replicator, so the problem seems to relate to the port replicator itself. EDT doesanyone experience a similar problem, or ideas on how to fix it?

  The USB keyboard is maybe defective. Have you tested on another PC?

  Bad drivers can also cause. If you have installed drivers/utilities keyboard, or a mouse Logitech/Microsoft/other, uninstall them. They may be in conflict with the default drivers.

• Pavilion 15-p246sa: BIOS update successful but cannot now access the BIOS screen

  The recommendation in HP Support Assistant I've just updated BIOS version f33, f34.  This succeeded and the Pavilion starts normally.

  However when I try pressing ESC at startup key is ignored and the trunk.

  How to reactivate the computer to respond to the ESC key and allow me to access the system configuration utility?  Have I somehow corrupt CMOS data?

  SOLVED!  I discovered the site of download drivers HP there is more BIOS updates for my Pavilion, the last being F.42.  So I installed this.

  At that time, it was possible to get the system configuration utility by pressing the ESC key.  However, it works a cold power upward, not reboot.

  Also the window by pressing the key is very short, some say about one-fifth of a second, and if you press two times you do not see the system configuration at all.  If some patience is required.

• T420 does not take into account the case of letters power on password

  Hello!

  just noticed that when I boot my laptop with power on password, it accepts the password regardless of the case of the letters I get. For example, if the password is set to "qwerty" it starts with "qwerty", "QWERTY", "qWeRtY", "QWErty" and so on. It is the same for the HARD drive password. Is this a bug or a feature?

  T420 4178

  BIOS 1.30

  Fingerprint authentication enabled

  It's just how it works.  The BIOS passwords actually use these keys scancodes, and not the ASCII representation.  In this implementation, the modifiers (for example, the SHIFT key) are ignored.

• 4-1101ea storage driver feel like?

  I'm desperate to get the abomination that is Windows 8 out of my want and install it on my copy of Windows 7, but could not find the necessary driver to copy on a USB pen to the storage/RAID driver?

  I downloaded the Intel Rapid Storage driver from the HP website, but it is an exe file which I guess is something like an INF will seek the installation of Win 7?

  I tried the Intel site, but had no chance to find something or the other...

  Can anyone help with this?

  TIA

  Hello:

  I can help you.

  Here is the link to the AHCI drivers, you need for your USB key. Ignore the reference to the Intel motherboard.  All drivers for desktops / laptops are included.

  You want the second listed file (x 64).

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22767&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & OSFullname = Windows + 7 + (64-bit) * & lang = fra

  Download and extract all the files without all the files on your USB flash drive.

  If my memory is good, you must select the Intel (r) 7 Series Chipset Family SATA AHCI Controller.

  You can confirm this if you still W8 on your laptop by going into Device Manager, expand the IDE ATA/ATAPI controllers category, where you will see the name of the enumerated SATA AHCI controller.

  It must match what I posted above .inf file.

• How to remove encryption BitLocker on Windows 7

  I have one of my drives with BitLocker encrypted in my Windows 7 (32-bit) system. Now, I'm unable to remove this encryption. How can I remove this completely drive encryption? I mean, I don't want any more of any BitLocker protection on this drive. Formatting is not an option. Waiting for an answer.

  Hello

  When you turn off BitLocker, you can either disable BitLocker temporarily or to decrypt the volume. Disable BitLocker allows TPM and other minor changes module changes the system. Decrypt the volume means that the volume will be entirely decrypted, and that all the keys are ignored. You must decrypt a computer before the operating system upgrade. Once a volume is decrypted, you must generate new keys through the encryption process again once, if you want to enable BitLocker.

   

  Before you start

  ·         You must be logged on as administrator.

  ·         The volume must be encrypted.

   

  To turn off BitLocker Drive encryption

  (a) click Start, click Control Panel, click Security, and then click BitLocker Drive Encryption.

  (b) from the BitLocker Drive Encryption page, find the volume on which you want BitLocker Drive Encryption goes off, and click turn off BitLocker Drive Encryption.

  (c) what level of decryption do you want the dialog box, click disable BitLocker Drive Encryption or decrypt the volume as required.

  (d) by performing this procedure, you have disabled BitLocker or decrypted the operating system volume.

   

  Additional resources

  The following resources provide additional information about BitLocker Drive Encryption:

  Help with the BitLocker Drive encryption, as with any Microsoft Windows component, please choose the support options listed on the Microsoft Help and Support Web site

  (http://go.microsoft.com/fwlink/?LinkId=76619).

• How to disable the old, disconnected records in offline mode in Win7?

  I installed Windows 7 (64-bit clean) in my office. Prior to that, I also upgraded my laptop, which has a connection with a shared folder on my desktop offline. Now, after update from my office, there is always a file offline (inactive/gray/disconnected) in the sync partnership, pointing to the old shared folder on my desktop that no longer exists! I can't go back and delete since this partition on my desktop disappeared.

  Is there a way to remove this connection from my laptop?

  Hello

  Welcome to the Microsoft Answers Forum!

  I suggest that allows you to delete records of online Office to follow the steps below:

  Method 1:

  The offline files cache is a folder structure in the folder % SystemRoot%\CSC, which is hidden by default. The record of the CSC and all files and subfolders it contains, should not be modified directly; doing so may result in loss of data and a complete disassembly of the offline files feature.

  1. in Folder Options, on the offline files tab, press CTRL + SHIFT, and then click delete files. The following message appears:

  Cache files offline on the local computer will be reset. Any changes that have not been synchronized with computers on the network will be lost. Any files or folders made available offline will be more available in offline mode. A restart of the computer is required.

  You want to re - initialize the cache?

  2. click Yes to restart the computer two times.

  If the problem persists, then I suggest you to change the registry settings and check if that helps you. But before you change or change the registry. I would say lets you create a restore point, and then continue with the steps.

  To create a restore point follow the steps mentioned below.

  1. open system by clicking the Start button, right click on computer and then click Properties.

  2. in the left pane, click system protection. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on the tab System Protection and then click on create.

  4. in the System Protection dialog box, type a description, and then click on create.

  For more information, please see the link below.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  Method 2

  Use the registry editor

  If you cannot access the offline files tab, use this method to reset the cache offline files (CSC) on the system by editing the registry. Also use this method to reset the cache on the side of client/database files offline on multiple systems. Add the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\NetCache
  Key name: FormatDatabase
  Key type: DWORD
  Key Value: 1

  Note The actual value of the registry key is ignored. This registry change requires a restart. When the computer restarts, the shell will reset the CSC cache and then delete the registry key if the registry entry exists.

  Warning All cache files are deleted and unsynchronized data is lost.

  Use Reg.exe

  You can also automate the process of setting this registry value using the Reg.exe command line editor. To do this, type the following command in the window of Reg.exe:

  REG. EXE. REG ADD "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\NetCache' FormatDatabase /t REG_DWORD /d 1 f v

  For more information, please see an article mentioned below:

  http://support.Microsoft.com/kb/230738

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• BasicEditField NO_NEWLINE does not?

  I have a BasicEditField where I want the key of entry ignored. I am that address both ways to make sure that I understand. First of all, I spend NO_NEWLINE in the constructor. Secondly, I intercept the ENTRY key in keyChar() and just return. Basically, I have reproduced the CustomKeywordField of the KeywordFilterField example. However, the Enter key is ignored (at least in the Simulator). I have space is added after the last typed character. This is expected behavior? Y at - it something I am doing wrong? Here is my class for completeness. Thanks for the help.

  static class final CustomKeywordField extends BasicEditField
  {
  Constructor
  CustomKeywordField()
  {
  Custom style.
  Super(USE_ALL_WIDTH|) NON_FOCUSABLE | NO_LEARNING | NO_NEWLINE);
              
  setLabel ("search :");
  }
          
  protected Boolean keyChar (char ch, int, int times State)
  {
  If (ch is "\n")
  Returns true;
              
  Switch (ch)
  {
  case Characters.ESCAPE:
  The keyword is clear.
  If (Super.getTextLength () > 0)
  {
  setText("");
  Returns true;
  }
  case Characters.ENTER:
  Returns true;
                  
  }
  Return super.keyChar (ch, status, time);
  }
          
  /**
  * Substitution of great to add a custom to our class paint.
  * @see net.rim.device.api.ui.Field #paint (Graphics)
  */
  protected void paint (Graphics graphics)
  {
  Super.Paint (Graphics);
              
  Draw the caret.
  getFocusRect (new XYRect());
  drawFocus (graphics card, true);
  }
  }

  Don't worry a keyListener, your code should work fine, as is.  I have a similar code, it will just check.

  I'm a little worried about it:

  If (ch is "\n")

  What is this for?

  Edit: just checked my code and tested, keyChar is not called if the field has been set using BasicEditField.NO_NEWLINE and the user presses the key .

  If you see keyChar invoked, can you confirm that you are using BasicEditField.NO_NEWLINE and what JDE/OS level you see this on.