Unable to choose between the two choices (A) or (B) and need youropinion and experiences

Similar Questions

• What is the difference between the two publish to ftp host and export as html in Muse?

  What is the difference between FTP publishing and export as HTML in Muse? When I had some problems with missing assets, I exported as HTML and fixed it, but it didn't update on the layout of the phone or completely on the desk until I published on ftp. Assuming that perhaps export just updates the files on the server? Thank you

  Hi Brian,.

  Site as HTML export will export just your Muse site on your desktop without making any changes to your site online, but when you select Publish to FTP, it publishes the changes you did for your website online.

  Export to HTML format is mainly used when you want to use any external client to load your site on the server.

  Refer to this document to better understand: Adobe Muse Help | Download a Site from Muse Adobe on a third-party hosting service

  Kind regards

  Akshay

• Switch between the two alternative provisions (both in portrait mode)

  I have created two alternative facilities for the purpose of these two being in portrait orientation, as they are to view the same article in two different languages. Is there a way to switch between the two using the navto: / / action or by using bookmarks and by using the go to destination. I tried both but I was wondering if there was something there.

  I have a publication ideally appearing in both languages, though being a main language and the seconary being there only for reference. I'm not wanting to produce two folios and use the filter region with Apple, as have the secondary language, as a reference is a selling point for the publication. Also using"States" would be more complicated.

  He must choose between non-ideal solutions, as a magical sticky toggle 'use this language' is not available.

  If you do mind ' t using the rocker on each page, then navto would be OK. and each page of the reference language should have a back button go. All reference pages that can be marketed after the main pages, and each of them can be hidden from OCD.

  If you opt for parity between languages, then you could start the app with no menu-swipable selection page, where you can decide what language to use. At the end of these two sections, another non-swipable page would give you the choice to read another language. The trick of no-swipable page gives users a feeling of an application of the only language of his choice.

  And I would use diapers, not another layout for the production. Seems to be a cleaner solution for me.

• The size of a difference in performance between the two different graphics cards

  Hey, I'm in the middle of upgrading my system and I try to spend my tax return on0 graphics cards. I'll run an SLI with Nvidia GTX 660 or 680 GTX. Now I realize the 680 is high the hand better than 660 I want to know is, it is better to the difference in price proformance wise. I intend to get two of them and SLI them, here are the two that I'm looking

  http://www.newegg.com/Product/Product.aspx?Item=N82E16814127699 - GTX 660

  http://www.newegg.com/Product/Product.aspx?Item=N82E16814127723 - GTX 680

  I'm running CS6 if I want to stay in the 600 series of Nvidia cards that are on the whitelist for CS6. I want to choose between these two cards because I'm under eyefinity right now and I can't go back, these Nvidia Surround support out of the box with any necessary adapters. MSI heatsinks are also fantastic with these cards.

  So basically what I'm asking, is the proformance go with 2 of the 680 years is worth the $500 price difference?

  Here is my system in its present form:

  Processor: AMD Phenom II X 6 3.2 GHz-> go to AMD 9590 x 8 5 GHz after I buy graphics cards

  RAM 16 GB Corsair Dominator 8-8-8-20

  Samsung 840 EVO 250 GB SSD (drive)

  Corsair 64 GB SSD as a scratch disk

  2 TB WD Black HDD as mass storage

  AMD Radion 6790-> will upgrading to one of the above cards

  Windows 8.1

  For After Effects, there is no reason to spend the extra money, unless you use a specific feature: the 3D rendering engine traced to the RADIUS. If you do not use this feature, and your focus is After Effects, then spend your extra money on RAM and SSD.

  See this page for more information about how After Effects uses the GPU:

  http://blogs.Adobe.com/AfterEffects/2012/05/GPU-CUDA-OpenGL-features-in-after-effects-CS6. HTML

  See this page for more information on material for Premiere Pro and Adobe After Effects: http://adobe.ly/pRYOuk

• Torn between the two

  Right now, I currently own a normal laptopn who weighs about 5 lbs. Computer of mg is a pain to get to school or to visit family in the city. Lately I've been saving up for a new device. An iPad or a Macbook? I'm torn between the two. With the iPad, I still keep my computer (which I've had since 2013) and use of the iPad to do on the go with naoual or buy a new computer in her car again

  Thoughts?

  The decision between a laptop and an iPad must be made according to what you are going to use the device for, and what limits you can live with. You do not have access to the internal file system of an iPad, so you should have save things in different places. Many have things saved in a particular application, or you can use things like Dropbox. The iPad does not also allow to connect to an external device such as a USB key. Internet access must be a wi - fi connection, because you will not be able to plug an Ethernet cable into the iPad, if you are in an area where there is no wi - fi, except if you have an iPhone you can attach to internet access. While a lot of newer laptops have no CD/DVD players, you can buy those external that connects via the USB port, which is something other non available for the iPad.

  I suggest make you a list of what are your needs and desires and then compare the specifications of the two types of devices to make your decision. I just you provided with a couple in the thought process.

• Find the difference of pressure between the two transducers using a NI DAQ 6008

  Hello

  First of all, I'm a relatively inexperienced LabVIEW Developer, so my apologies in advance if this message does not have something, or otherwise lacks clarity.

  I try to develop a VI as follows the pressure difference between the 2 EME 3100 pressure sensors (4-20 my), related to two different pressure lines, using a NO-DAQ 6008. I would like for the acquisition of data to read the two transducers, then have him find VI the differential and write this differential in an Excel file.

  The data sheet for these sensors may be found at: http://www.gemssensors.com/Products/Pressure/Pressure-Tranducers/Sputtered-thin-film/~/media/GemsNA/...  It is a 3-wire system, with a voltage between 8 - 24V. I use an external power supply of generic brand to power sensors, which provides a maximum of 24V @ 4A.

  I drifted my physical connection (for the two transducers) this thread http://forums.ni.com/t5/LabVIEW/I-am-having-trouble-Omega-PX4200-Pressure-Transducers-to-where-I/m-p... and am relatively certain of the accuracy of the information. For purposes of signal conditioning, I use a 500 Ohm resistor between the signal of each transducer and the Earth wire.  On the side of software, I use the latest version of LabVIEW (2011) as well as MAX on a Windows 7 64-bit machine.

  In an ideal world, the sampling rate would be as high as possible, but 4 samples per second would suffice for all purposes useful.

  Given this goal, are there any sample of VI (especially for MAX, which I have not yet used) who would be similar/applicable to this project, specifically, regarding setting a sampling frequency, calibration of the transducers or affecting the pins/channels appropriate? All resources would be greatly appreciated.

  Kind regards

  MG Wilkinson

  Measure the voltage between the two resistance (resistance by probe 4-20 MA) using the differential inputs of the x 600.

  When you configure the task, you can read several entries at once, by entering in "Dev_ / AI0:1" in the physical channels and using the "several channels / {unique |}". multiple} samples"polymorphic instance.

  600 x can read 1kS/sec.

  Do maths/conversions on the table, and then simply subtract the two tables.

  Could also take some samples (10-100) at 1 kHz and their average together, give you a smaller rate effective sampling but with less noise.

  A loop of producer-consumer would be good architecture here, let the daqmx reading live in a loop and sends the data via a queue to a 2nd consumer that performs mathematical operations and write to a file.

  

• I can't stop finite samples daqmx read between the two?

  Hi all

  I want to read data from 10 seconds to a trigger is received. for this im using daqmx task finished sample mode and read the data on the trigger getting. It works fine but I can't stop my vi between the two when its reading of the data. I have to wait for it to complete the reading of values, and then stop the vi.

  so I switched to continuous sampling mode that allowed me to stop the vi whenever I want.

  I just want to know is there any means or the property using which I can stop my task over daqmx read when I want?

  I guess you call DAQmx Read with extraordinary value (-1) for samples of #.  It is also the default if left thread continues.  In a finished sample task, it means to wait until the memory full buffer has been filled with samples before returning.  Once you make that call, you cannot directly finish soon.  You're stuck waiting for buffer fill or for the timeout expires (default 10 seconds).

  One way to avoid getting stuck is not to ask for samples that do not exist already.  You can query a DAQmx Read property, known as the "Samples available" or something like that and son of this result in a call to DAQmx Read.  Such a call will return immediately whatever data are currently available.  Subsequent calls will give you samples.

  -Kevin P

• I have CC installed on PC can I use creative cloud on the iPad Pro with a smooth transition between the two?

  Hey - I hope you can help. I'm under CC on a PC and I buy an iPad pro. Can I perfectly send/receive the vectors/graph between the two devices - in other words is going to talk about Apple and Microsoft to another. So if I'm with a client and then come home can I download/send what I did on my ipad and continue to work on my PC?

  Sorry to sound stupid, but I can't seem to find real answers anywhere.

  Thank you!

  Hi Vicki,

  You can use Adobe Creative Cloud on your desktop (PC Win) and also on your device (iPad pro).

  Just be sure that PC supports the desktop versions of the apps (desktop applications Adobe Creative Cloud|) Adobe Creative Cloud ) and the iPad device will support mobile applications (Mobile Apps ).

  You can synchronize the work on one of the applications to the course in the library of creative cloud in order to adapt them to another application.

  Hope that helps!

  Kind regards

  Sheena

• Hi, can I cancel my monthly subscription between the two?

  I just want to confirm if I can cancel my membership between the two without any cancellation fees?

  Have a look here to cancel your membership creative cloud

• How to count the number of Sundays between the two dates

  Hello
  
  I want the number of Sundays between the two dates
  
  example of
  
  number of number of Sundays between 4 January 2013 ' and April 30, 2013 "in a select query, I have to include this as a sub query in my select statement.

  nordine B wrote:
  Hi Frank,.
  Have 1 doubt...

  In many countries the week could me "Monday". How the application handles it?
  Or did I get something wrong?

  Help, please!

  For ' IW'(ISO week) early in the day is always Monday...

  It's so simple - calculate the weeks between two dates based on Monday... This is the number of Sundays...

  NEXT_DAY is another option...

  SQL> with dd as
    2  (
    3      select TO_DATE('01-04-2013','dd-mm-yyyy') fdt, TO_DATE('30-04-2013','dd-mm-yyyy') ldt from dual
    4  )
    5  SELECT       fdt,ldt,
    6            (next_day(ldt,'sunday')-next_day(fdt-1,'sunday'))/7 sdays
    7  FROM         dd;
  
  FDT       LDT            SDAYS
  --------- --------- ----------
  01-APR-13 30-APR-13          4
  

  Published by: JAC on May 2, 2013 12:20

• The merger between the two images with the control points? Novice request

  Hi all

  I've seen a tutorial that describes exactly what I want to achieve, but can't for the life of me remember of it called or how to do it.

  Basically, I have two images of the map I want to put in a short film. During the transition between the images, instead of simply melted into a single image I want that they "sink" in the following image.

  The tutorial I've seen used Premiere Pro and "checkpoints" that match between the two images showing where things moved too.

  I am barking the wrong tree? I will reply cheerfully questions in an attempt to better describe this. I apologize for the vagueness of the topic.

  Tom

  For a quick and dirty overview using the track Matte Keying, see this glance for this purpose: https://vimeo.com/user17132571/review/69330020/8f4fc79c86

  Hunt

• Trying to get the 'difference' between the two tracks

  What I'm trying to accomplish is the following: I have an audio track of a voice-over with a music bed located underneath. I also itsself Chamber music, without the voiceover. I want only the share of voice. Is it possible that I can "cancel out" the part of the music or get the difference between the two tracks (just the voice part)? It seems that there should be a way to do it, but for the life of me I can't figure out how do it!

  Any advice?

  There you go...

  http://www.libinst.com/audio%20DiffMaker.htm

  Unfortunately, the above utility has been abandoned by its author.  :-(

  It only works on Windows XP, to start...

  -RFH

• The difference between the two copies and Clone?

  I make a copy of an existing symbol. On the Edit menu, they have Dulicate and Clone to achieve this. What is the difference between the two? As far as I can tell, if I select the clone, it puts a copy of the object directly on top of the selected object to copy. If I select duplicate it offered the copy is not directly above the original to copy object. What is the difference?

  Well Yes

  Jim Babbage

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.

• How to specify the spacing between the two components

  Can specify us the distance between two points on a form? If so, please let us know how?
  
  Published by: user1670125 on July 14, 2010 05:37

  Hello user1670125 (please tell us your name).

  It depends on if you mean vertical (distance between the items on separate lines) or horizontal (distance between the items on the same line).

  A method I use for opening a vertical space between two elements is:

  -establish a single display without label
  -Name it "P #_BLANK ' or ' P #_BLANKn ' (if there is more than one page)
  -give a sequence so that it renders between the two points
  -do not escape special characters
  -give a source value of "< br / > < br / > < br / >" (according to the number of blank lines you need)

  A method I use for opening space horizontally between two elements (assumption here, is that you have defined the second element to not display on a new line and have adjusted the scope of column on other points in the same region to bring together the two fields as needed) - simply specify "& nbsp;" & nbsp; & nbsp; "in the first element display text of item (according to the number of spaces you need to).

  Hope this helps,
  John