UNABLE TO CONNECT TO A SPECIFIC ADDRESS URL

Similar Questions

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• I'm unable to connect to a specific web site. Have you tried 3 different browsers and they all say that they are unable to connect. No one else has a problem connecting to the page.

  I tried to use www.findagrave.com for 2 days.  I tried 3 different browsers.  all say that they are unable to connect.  No one else has a problem on this page.  I have no problem to do something else.  Why, throughout this site I can not connect with?   I use it all the time in research.  very aggravating.

  original title: on a web page

  Well, I tried the support page, but I already tried all that.  I did a restore full back to factory settings... still cannot have only one page to load.  I'll call my dsl provider this afternoon.  I don't know what else to do.  I can't communicate with Findagrave.  I don't have a snail mail address but no phone number.  But I don't think that it would be them anyway, if no one else has a problem with this web site.  There must be on my end, don't you think?

  I don't know what to tell you. There is no problem, it's on your side.

  If you care to try it... on the assumption that your user account is damaged.
  Create a different user account with exactly the same type of account > connect to it and see if you can access this Web site.

  Personally, I doubt that will solve anything, since you already restored your computer to factory settings.

• Unable to connect to a specific web site

  Although I'm not a novice when it comes to internet issues, I met a problem only and myself cannot explain... I'd be VERY grateful if someone in the community might be able to get an idea of troubleshooting.

  A week ago, I noticed that on my home network (2 XP Pro, 1 Vista Home Premium and Vista 64 via WiFi, Linksys Router 1 laptop), I was able to access a favorite web site (u2torrents) via a wired hard XP systems, others would not connect.  I tried to use the numerical IP address, but it connected extraordinarily slowly and incompletely loaded pages.  I ping the site and got no response.

  I have connected one of the XP Pro that was blocked by the router, directly to the cable modem, and it IS connected.

  So, I thought that you need some sort of router problem.

  Linksys has worked with me for three hours, and they couldn't identify a problem.  Of course, we went through the usual steps of router cold restarts, restore the default settings.

  Any running Zone Alarm internet from my PC, but even more by turning off without effect.

  I took my laptop to another WiFi network, and it worked fine... so, probably to prove the issue had nothing to do with the OS corruption.

  All of a sudden, everything worked for two or three days.  I did however replace my router... four year old and all worked for two days... and now the same problem has recurred.

  I have confirmed with u2torrents.com (by pingdom) that at least through this mode of audit, the site itself has no problem.

  I am usually able to access u2torrents.com via my PC at my workplace, now, today I can't connect from there either.  However, at the Hospital where I work, u2torrents.com is accessible without problem.

  So, I don't know where to go with this... I can't identify a problem with my home PC, the router, or by the owner of the u2torrents.com site, the site itself... the only is different home computer that DOES connect to the House has DNS settings which allows him to assign a static ip address on my home network, but can't imagine what a difference that would make...

  And now with two completely separate ISP of the no connection to the u2torrents.com site, I'm really lost.

  So, if anyone has an idea about that, I will be eternally grateful!

  Thanks in advance, Peter

  Thanks for the thoughts!

  I found a solution... it is the affected DNS server... when I inserted the ip to opendns settings, everything worked like a charm.  So, I guess that somehow the site I was previously access to was somehow fell off the screen radar of the DNS server by using my ISP was.

  Seems that it is a rare question... but to the credit of my ISP, when I called them, one of the suggestions is to insert the Google's DNS ip address, and that probably would have worked too.

  Hope if someone else has this problem in the future, they may find this link and save several hours of aggravation... not to mention buying a new router that I probably didn't seriously need again!

  Once again, thank you to those who have read my request and tried to help him.

  Peter

• Hi, for some reason, I am unable to connect to that specific Web site. Can someone help me please? Thanks in advance.

  84.200.47.125/forums. I know this is because I can connect to my mobile phone. This IP address is on Call of Duty 4 PC and I can not connect to it and also TeamSpeak. Are there solutions to solve this problem? Thank you.

  Your security antivirus, firewall or Internet settings it blocks on your PC?

• Unable to connect to a specific wireless network

  I'm currently sitting in a café, connected to their wifi WPA2 with my MacBook.

  I can not connect to the same network with my iPhone 4S. It just do not see it--other networks, Yes, but not the coffee. I tried to reset the iPhone; the other networks still appear, but not the one I want to join. I tried to connect manually several times with 'other '.... ', using my MacBook to check SSID and password of the wifi, but the iPhone says that it cannot find the network let alone accede.

  It's a signal very strong: the wifi bars are entirely black in the menu bar of my MacBook. My iPhone can see half a dozen other wifi networks, including those where the router is not as tight as one that I am trying to connect. I can not not connect to others: either they are password protected, or require a customer relationship or are not worthy of trust.

  What is going on?

  Just to add: I know that the standard Apple FAQ on connectivity issues iOS wifi; they are not a help here.

• Unable to connect to a specific landline number?

  I have a friend I call several times on a daily basis. It has a fixed line part 3. I have no problems with the appellant until about 3 weeks ago. His phone works fine without all the blocks and he is able to call me. I can call every landline around him, but his will not through on my iPhone. It says the number you have reached is no longer in service. I called my provider and they can not figure it out because I have not any restrictions on my phone and neither does my friend with his phone number. Has anyone else had this problem before. No one can seem to understand. I have another friend in another State who is also impossible to call his number, too. She does not know why either and we all have two iphone he 6.

  It is unlikely that it is a problem with your iPhone, what has changed with your friend (e) 3 weeks ago?

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• I can't connect to a specific Web site

  My PC is running w7 Pro x 64 and IE9.  I'm unable to connect to a specific Web site for which I have a valid user id (my email address) and password (for me at the time to register for the Web site). When I try to login, I get a message saying the user name or password is incorrect, a second try results in a message that says that either my username and my password is not recognized - it displays also exactly what I typed so I can see my errors. The user name is correct, but the password it displys is not what I came - he says it is so kxEXkaTT that I had entered the correct password kxEXk1T0, the owner of the site says that they have logged on successfully with my user name and password without any problem at all. I tried to connect from my wife PC and PC friends and have had a complete success. All my different passwords with most of the websites that I use have different similar cases and alpha characters and digital and none of them asked me no problem

  Other facts are that I was a regular user of this Web site for 3 years without problem until all the time, I upgraded from IE8 to IE9. The site says that they have thousands of registered members, as I am and have not experienced the problem that I have. I also have my PC protected by major software anti virus check and online protection against viruses and malware. and to my knowledge I don't have a virus problem more than 12 years of using a PC. I always check my incoming emails to the ISP server level and delete everything I do not feel safe on before I have to download the rest on my PC. I also only access sites deemed most is serious busdiness, media, and Government don't respect - no games, etc.

  I suspect that I have a few curruption of memory possible in the bowels of IE9, but am worried that I won't lose all my existing data, updates and the settings (as Favorites) if I remove and reinstall from the original CD IE9

  Any thoughts on what I should do would be appreciated. Thanks in advance, Arthur

  Open ie9,

  Hold down the ALT key and type these letters to

  You can also use Ctrl + Shift + Delete

  Delete your browser history / delete button,.

  Check all of the boxes,

  Clear the check box of the very high.

  Click on delete.

  Close and open a new window.

  If still no joy.

  Reset ie9 Mr. Fixit for me,

  Check the delete personal settings when prompted.

  http://support.Microsoft.com/kb/923737

  Click the Start button in the taskbar.

  Click on Control Panel,

  Click on Internet options,

  Go to the Advanced section,

  Click on the Reset button on the bottom,

  Check the delete personal settings.

  Use the recommended configuration and installation options.

• Cannot connect to a specific Web site

  For the last two weeks, I am unable to connect to a specific website (sharks.nhl.com). The user name and the password seem to go through fine (when I give a wrong password I get an error on the site), but the situation changes not connected.

  This problem exists on my desktop Linux and work only with Firefox. On my macbook/Firefox 30.0 it works very well on my windows laptop with IE 10 it works fine, on the same Linux with Chrome last he also works very well.

  However, it does not work with Firefox for Canonical Ubuntu and Firefox binary downloaded from the mozilla web site. I deleted cookies and other things and there is still no progress. The macbook Firefox and Linux firefox sync via Firefox Sync, for sets of modules are identical.

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Edit > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Edit > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• WRT600N - unable to resolve 'Address URL' when changed

  The ' URL ' doesn't seem to work in my WRT600N. I have the latest firmware (version 4 Ver.1.01.36).

  For example, if I enter http://WRT600NLOCAL.com in the field "URL" and click on "Save Settings", it seems to save successfully.

  However, if I do a 'ping wrt600nlocal.com' of any computer connected to the router, it does not solve. (Of course web access does not for http://WRT600NLOCAL.com either).

  Any ideas as to why it does not work?

  I realized a few things. This looks like a bug.

  If 'Address URL' contains the string "WRT600N" (for example, "http://wrt600nrouter.com"), it fails.

  When I change to something that is * not * contain the string "WRT600N" (for example, "http://localrouter.com"), it works correctly.

• Unable to connect via radio - impossible to obtain network address

  All,

  I had to restore this laptop due to virus problems (my daughter system..).  I have put back it and it works except that I am unable to connect to the wireless network.  It says 'Acquiring Network Address' and goes then to the "Limited or no connectivity."

  Here are the details:

  System:

  Inspiron 1300 - XP Pro SP2

  Dell Wireless 1370 WLAN Mini-PCI Card

  Parameters:

  o use Windows to configure the verified wireless network

  o in Dell Wireless Utility, unchecked "let this tool manage your network."

  o WZC: start & automatic

  o TCP/IP: Obtain IP automatically and obtain DNS automatically

  I took action:

  o reloaded all drivers available for my service tag, including the pilot for

  the network card

  o went through all the Dell relevant troubleshooting steps

  o I have a different laptop that connects to the wireless network and I

  compared the parameters between the systems of work and non-working - they

  seem to be the same (another pc and card)

  o the 'bad' system can connect to the network via ethernet cable

  The status bar displays the network icon (pc screen) with yellow trinangle and!

  and 5 green bars for the network card has an excellent signal with unknown status.

  I'm not clear on the question of whether Windows or the utility of the card should be network management; I tried both to no avail.  I'm basically out of options to try and hoping someone can help me.

  Please let me know if there are any additional necessary information.

  Thank you in advance for your help!

  
  

• Unable to connect to the URL of planning after new installation & configuration 11.1.2

  I installed 11.1.2 on Windows 64 bit environment and configured.
  
  This is my environment:
  Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
  Box 2. Planning. Installation and configuration was successful.
  
  Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
  
  Trobleshooting:
  When executing netstat, 8300 does not run on this box.
  Also configured to 'Manage the clusters of planning' with no luck.
  The WebLogic (11g) server indicated State planning is unknown.
  Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
  I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
  Journal of planning does not reveal the error messages.
  EMP system log shows ServletContainerAdapter manager not initialized successfully
  There is no error in start-HyS9Planning - out .log.
  Start-HyS9Planning - error.log shows the requested service has already been started.
  
  There is an error in the validation log:
  
  [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
  java.lang.Exception: java.net.ConnectException: connection refused: connect
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
  at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
  at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
  to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
  at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
  at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
  at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
  at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
  to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
  to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
  Caused by: java.net.ConnectException: connection refused: connect
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
  at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
  at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
  at java.net.Socket.connect(Socket.java:519)
  at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
  to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
  at sun.net.www.http.HttpClient.New (HttpClient.java:306)
  at sun.net.www.http.HttpClient.New (HttpClient.java:323)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
  at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
  ... 21 more
  
  ]]
  
  
  What am I not doing?
  
  Thanks for your help in advance!
  
  Published by: VenuRamini on October 6, 2010 07:25
  
  Published by: VenuRamini on October 6, 2010 07:35

  Make sure that the Weblogic password is correct in the boot.properties and restart the services.

  Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

  For example,.

  For APS:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

  For Regional service:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

  HTH-
  Jasmine.