Unable to connect to the URL of planning after new installation & configuration 11.1.2

Similar Questions

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Unable to connect to the Oracle Forms cmdlet after 30 Seconds (OATS)

  Hello
  
  While playback get error of OATS (Oracle Application Testing Suite) am most of the time 'Impossible to connect to the Oracle Forms applet after 30 Seconds (OATS)'.
  
  Please suggest solution for this type of error. I can't go further with this type of error.
  
  Kind regards
  Sairam

  Hi Sairam,

  GoTo OpenScript preference and change timeout for reading of the EBS/forms.

  Launch OpenScript, click view and select Preferences OpenScript. Then select Oracle EBS/functional forms under playback. Change timeout value.

  Kind regards
  Dembélé M

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• WNDR 3400v3 unable to connect to the Firmware update automatically after ISP

  After the upgrade to Version Firmware to 1.0.0.48

  I am unable to connect automatically to ISP using PPPoE configuration, using the connection information...

  I am forced to use, no connection required during installation and each time you connect via the portal of the ISP.

  Need help.

  To your "connection Mode" set it to always on.

  If it still does not work, please post a screenshot of this window you get.

  By the way, have you tried to reset the router after firmware upgrade?

  If you have not, please push the reset button on the router for 10 seconds with a paperclip.

  After the reset, reconfigure the router.

  Let us know what happens.

• Unable to connect to the Outlook e-mail after that put 9.3.1 update

  I can't connect to Outlook e-mail after set 9.3.1 update.

  "Cannot get Mail.

  The connection to the server has failed. »

  I tried to delete the email account and add it again. The same problem.

  I know that this is a widespread problem now.

  When will this issue be resolved?

  Thank you!

  Yes im also having the same issue but it happened at about 23:30 email hotmail server seems to be down for me but I am on ios 7.1.1 if this isn't a thing of ios. Also tried it on another ipad, iphone and outlook using windows 8.1 so im 99.9 per cent a few hotmail servers are out of service

• Unable to connect to the second Pc (WinXP) after lapop upgraded to Windows 7

  I had the DVD of Windows 7 Ultimate free upgrade and installed successfully.

  All programs work, able to connect to the internet, no problems.

  Network home (Workgroup) defined and was available via before Vista upgrade to Windows 7.
  I mean available able to see that both computers defined in the task force of each machine.

  After the upgrade Windows 7 does not show the other machine and screw-a-to-a.

  Settings network checked and everything seems OK.

  Suggestions and advice appreciated.

  Thank you

  I have,
  the test center network disable password
  did the tour here!
  Rgds
  Alex

• Unable to connect to the network wireless company after Win7 upgrade

  My network is not broadcasting the SSID, so on Vista, I used to set up the connection manually.  However, with Win7 64, I get an error "an unexpected error has occurred."

  Reference Dell xpsM1330

  Intel WiFi Link 4965AGN

  Any help would be appreciated.

  OK, let's see if we can keep it active and come up with a solution...

  Got a POC MS to give me some info that may help...

  I have known many above have, while I can connect to wireless networks, including my home wpa2, plus any time, I tried to do a my wpa2-Enterprise don't, go and had errors in the event log. also the similar failures whenever I would try to manually create any wireless profile using wpa-enterprise or wpa2-enterprise.

  Note also mine was a machine that got USMT data migrated, and I have a feeling that it was responsible for migrating the keys below...

  So here was the final solution, and maybe you guys can check if it is the only necessary thing that I had tried various other things without result, but it was the 'last' modification I did that things work...

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RasMan\PPP\EAP

  There are a number of subkeys with different numeric values...

  while I can not tell you exactly what to search for, in my case I noticed there was a key pointing to what I expected, a related key ras in the ED. of windows\system32 however, I had also three other keys pointing to the files associated with Symantec, which I did not on my machine newly built.

  So I exported keys of a newly-built machine that did symantec. He had four keys under EAP, but only one, the last of them, was related to Symantec, underlined all the other files in system32.

  I have imported the keys in my broken machine, removed the a key which was related to symantec and without even having to restart... everything has been corrected...

  so... here my suggestion and I hope everyone can comments if it works, so we have more information if it's the order of the keys or just the presence of bad entries... but I would say, start by looking at your key under EAP and see if there's anything that references the dll files which may not exist on your machine.

  If you don't have these keys, either remove the key, either try to put the file in place which is referenced, assuming he hasn't.

  We will do other tests internally, so I'll feed if we have additional findings.

  Good luck.

• Unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The device will be disconnected.

  I started this thread on the debate under of the "Fusion free v2.0.3" but Michael suggested I post this as a new thread, because it turns out that my problem was not due to the much discussed most recent update security Max OS causing ThinPrinting to break.  Whenever I have start up of my (Win XP and Windows 7) VM beta I get the above error message, and therfore cannot take advantage of the ability of merger of ThinPrint print on my printer Mac network.  Michael asked several log files, I have attached 3 in this post and others attached to my next post, so I hope you smart people of VMWare will be able to help me with this problem.  Thanks in advance!

  Ron

  I got a response from ThinPrint with a possible solution - the problem may come from a file/etc/printcap obsolete, which refers to a computer that no longer exists. The DNS lookup may be a delay of 30 seconds and can block the process of thnuclnt. The file/etc/printcap file contains a copy of the configuration of the printer, but it is not necessary for the thnuclnt. It is generally not yet created by OS X by default, but it seems that previous updates to the OS X system or printer drivers can be turned on at any given time. Subsequently, the option got turned off, but the old file was left with outdated information.

  Could you try to rename the file/etc/printcap file and see if it eliminates the delay of 30 seconds? To do this, run Terminal and use the following command:

  sudo mv/etc/printcap /etc/printcap.bak

• ATG: Unable to connect to the ACC

  Unable to connect to the URL rmi://localhost:8860 / atg/devtools/UpdateAgent

  Couldn't make clear for module < app > URL http://LP-047DFGRDMDNS:10180 / dyn/admin/dynamoModuleResource /? moduleNMae = app & resourceURI = META-INF/MENIFEST. MF

  This is usually caused by a wrong setting of the property the/atg/devtools/UpdateAgent component of core adminPort.

  This property must be set to the HTTP port number for the Administration of the Dynamo server.

  I opened http://localhost:10180 / dyn/admin/kernel/atg/devtools/UpdateAgent /? propertyName = hostName and changed it to ComputerName localhost and it workes for now...

• Unable to connect to the App store on iOS 4.2.1

  Hi guys!

  I decided to take my iPhone good ol' ' 3 G out of the darkness to use it as a backup phone in case of any situation, unhappy and unable to connect to the iTunes/App store after several tests. I checked my wifi connection and it worked well on Safari. Someone here has a tip on how to fix? Or has Apple really stop its connectivity on the older iOS app store - are

  After seeing your post, I booted up my 3G to test and noticed the same thing. I thought it might have something to do with Date & Time settings. I noticed that, even though 'Set automatically' performed, the phone thought that the current date was in September of last year. Since the App Store will not work if the date and time settings are incorrect and that the phone can't connect to the server to get the right time, I would say that is why you don't get on the App Store (assuming that you also see the anomaly of the moment).

  I have an iPod touch 2nd generation, which also iOS 4.2.1 and will test it tomorrow there.

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• series 0: could not connect to the printer virtual daemon after 25 attempts

  I get the error message that the virtual printer daemon can't connect whenever I start the guest system and I can't get my printer to work from Windows.  He used to work when I first set up my VM.  Any suggestions on what this means and how to fix it?  I'm on Mac OS X 10.5.6 on a MacBook Pro and have Windows XP Home Edition on the virtual machine.  Also, when the printer works on the virtual machine, it still required me to disconnect, and then reconnect the USB connection to make it work.

  If you Search the forums for "Failed to connect to the virtual after 25 attempts printer daemon", the first result from that moment is Re: unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The unit will cut'. In this thread, mudaltsov follows the problem down to one/etc/printcap needless - move which should solve the problem.

• It says attempts to connect to the server and will not download installation

  It says trying to connect to the server and download any new installation

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Internet Explorer message: "unable to connect via the parameter to wide band".

  When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please

  [Original title: programs network networking Internet site Internet website URL website network]

  Hello

  ·         What is the exact error message you get when connecting to internet?

  ·         Which is the browser you use to access the internet?

  ·         You are able to use other internet applications such as messenger etc?

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link below to connect to the internet in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2:

  Follow the steps outlined in the article below if you can not connect to internet:

  http://support.Microsoft.com/kb/956196

  Method 3:

  If the steps above do not follow the steps in the link below for network connection problems in windows:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  I hope this helps.