Unable to connect to the Simulator (169.254.0.1)

Similar Questions

• BB10 Simulator. Unable to connect to the Simulator.

  My app works on BB Playbook, but I want to assure you that it will also be the BB 10.

  Unfortunately, flash builder is unable to discover the Simulator and connection manually by typing ip of the sim also does not work.

  Controller app, which comes with the sim card, is unable to discover and connect to the SIM too.
  The mode of development. I tried to reinstall the Simulator, but it did not help.

  Does anyone have this problem?

  I solved this problem by uninstalling VMware workstation and install VMware Player instead.

• Unable to connect to the Simulator for debugging

  For some reason I can't connect to my Simulator debug. I can run my project, but when the debugging console says "pending connection on port 5768" and never makes a connection. I have tried to resolve this but couldn't find an answer

  I looked at the documentation for the developer, but he said nothing about it.

  It's very strange. Just out of curiosity, trying to put development power off mode, then running, but this time choose a different IP address. Then add back to Momentics and try to run again.

• BB Simulator, get: "unable to connect to the selected Mobile Data Service, please try again later."

  I run MDS firstly, it seems well, window is open. But when I run the Simulator, in my case 8300. I get error when you try to access any web resource: unable to connect to the selected Mobile Data Service, please try again later.

  I've initially tried to do this on win7 and moved to xp, which solved my problem of MDS, but I still can't get networking funciton on the Simulator. All that I'm missing? Need to make

  Had, it works with the help of Michael on StackOverflow.

  On Win7.

  (1) uninstalled java and things bb.

  (2) fresh installed JDK 6 with the SDK

  (3) path added to jdk/bin to the path environment variable

  (4) downloaded Simulator runing 4.2 os No 4.5

  (5) installed MDS and Simulator in folder BlackBarry under C: /, runing administrator installation

  (6) powershell started as an administrator

  (7) sailed to MDS folder via powershell run.bat and executed

  8) sailed to BB Simulator via powershell folder and run 8300.bat (downloaded 8300 simulator)

• Unable to connect to the selected mobile data Simulator service

  First of all, let me say that I am a newbie with BlackBerry and simulators.

  I just downloaded 9630_Verizon and 9630_Sprint simulators as well as the MDS Simulator package. I start the MDS Simulator and the DOS window opens and seems to work very well. I start be 9630 simulators and while it seems to work, when I click on the button of the browser and try to go to any web page, I get:

  Unable to connect to the selected Mobile Data Service, please try again later.

  The version of the 9630 Simulator is 2.12.0.47

  The MDS Simulator version is ' SCM 4.1.4.19 19 2007/07/10»

  I can connect to the MDS Simulator using my browser of desktop connection to localhost: 8080. Statistics show all values of zero, so it seems that the 9630 is not yet connect to the Simulator. Is there a configuration file somewhere that I have to change to make it work?

  After that I posted this, I continued to search the forums of possible solutions. One recommendation, I found was to delete the files ".dmp" and restart the device Simulator. That did the trick, things work now.

• Unidentified network, cannot connect to the internet + 169 ip address

  Hello!

  I also have this annoying problem. I've seen a lot of posts similar and tried all the proposed solutions, but nothing worked.

  I have a

  ZTE zxv10 w300 camera and 2 computers (a laptop and a normal pc)

  There is no internet access on the computer that is not connected to the router with the cable. It can connect to this unidentified network, but not to the internet.

  This is the case with both computers.

  In addition, the computer that is first connected to the router with cable, will have this 169 ip address.

  I could solve this problem by disabling the wireless adapter, turn off the router, and then turn on the router and activation of the adapter, but then it changed back again. On one of the computers, or both.

  Any ideas what could be the problem?

  Your wireless card is not connected to anything.  The lines in bold show that the wireless adapter has an IP address that is generated by 'Addressing IP private auto' (APIPA).  This is what happens when the adapter is configured to obtain an IP automatically from a DHCP server (for example, your router) but isn't able to get one, either because the DHCP server on the router does not work (not in your case), or because it is not a valid connection between the adapter and the router.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-1D-0F-F4-36-5B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::19db:c2d7:452d:b16a % 11 (Preferred)
     Autoconfiguration IPv4 address. . : 169.254.177.106 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 184556815
  DHCPv6 DUID customer...: 00-01-00-01-1A-36-12-69-00-1D-0F-F4-36-5B
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  On wireless connections, it is almost always the result of a misconfigured encryption password, but it can also occur if the router is configured with a MAC filter (or any other security measure) in order to prevent the connection, or if a firewall on the computer is not properly configured.

  From the network and sharing Center, click on the link 'Manage wireless networks' to get this screen:

  

  You can do several different ways.

  1 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Now connect to your network without wire in the usual way and carefully enter the encryption password.

  2. change the wireless network appears in the list to have the correct encryption password.

  3 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Connect to your router with an Ethernet cable and connect to the router configuration utility.  Disable all configured for the router security measures: encryption, MAC filtering, time of day restrictions, etc.  Now connect to the network without wire in the usual way.  If it works, you can reconfigure the security measures using a router configuration utility (even if there is really no need to use anything other than the WPA2 encryption and a password).

  If you are unable to connect to the router wirelessly when you have disabled all the security on the router, check third-party security software installed on your computer to see if it blocks the wireless connection.

• SDK can not connect to the Simulator in VMware

  My operating system: Windows 7 64-bit

  SDK version: 10.0.9; Build id: v201212072306

  VMware Player Version: 5.0.1 build-894247

  Video card: NVIDIA GTX 560 Ti

  I'm trying to use the simulator of 10 BlackBerry, running in VMware Player, to test applications under development in the native BlackBerry SDK. However, when I try to run these applications from the SDK and connect to the Simulator, I see that even though (I think) I got the correctly configured IP address for the target, it is still listed as "Not connected" in the list of Options of the target (I don't know if this is normal or not). Then, if I try to launch the project in any case, I get the following error message:

  "Unable to connect. Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »

  Sorry if I didn't explain very clearly, this is very new to me, and I still have trouble getting my head around it. I'm sure there is probably some information that I forgot to include in this post, but I will provide if I think that whatever it is.

  I have been looking for solutions to the question, but it seems that there could be many possible causes, so I thought it would be better to make a new thread specifically for my situation. I tried the following:

  -Check that the development Mode has been activated (it seems that it has been enabled by default)

  -Ping I thought several times, was the IP address of the command line simulator (sometimes I had to meet with success, but not at the beginning)
  -Disabling Windows Firewall
  -Running a .bat file with 'ipconfig/release; ipconfig / renew. ipconfig/flushdns ".
  -I check the correct target for the Simulator IP address (double-check this confuses me a little, but I think I can find it in "Settings"-> "About" simulation-> 'Network' menu?)
  -Temporarily disable Avast! antivirus software to check if she is interfering
  -Verification of VMware Windows were running (I think he installed four of them in total)
  -Uninstall (then reboot) and reinstall the SDK, Simulator and VMware and restarting, repeatedly

  -Windows asked to troubleshoot the connection of VMnet8 of VMware; He said DHCP must be enabled, but then failed to do this for me (this left me confused; I wasn't sure if it was important or not)

  -Passage of the NAT VMware Bridged mode for the simulator mode, then the connectivity test (it doesn't seem to help, and the "About"-> page 'Network' in the simulation was empty), then power back up

  Any help or any what pointers to additional information, I would give, would be greatly appreciated. Thank you!

  EDIT: I also cant seem to get QML previews to work at all. I don't know if it is related to my other question, but I thought it might be worth mentioning, and this is something else I would try to fix, if possible. I tried to update my drivers, but to no avail.

  Solution found! I just tried to add a target in the software development kit using the IP address on 'Settings' of the Simulator-> "About"-> "Network" screen, but the target has been filtered out of the list, unless I unchecked "target filter based on the selection of C/C++ applications". If I unchecked, the target has been classified as ' 192.168.31.128 (Neutrino / x 86) ', but the Run button was grayed out when I chose it and I noticed the error message, ' binary Selected target do not match x 86 "at the top of the window." I have googled this error message and found the following (quite old) thread:

  http://supportforums.BlackBerry.com/T5/native-development/QNX-IDE-target-selected-binary-and-target-...

  After reading through and testing, it turns out that all I had to do was change the active configuration in the drop-down list at the top of the window SDK 'Device-Debug' for 'Simulator-Debug", little"hammer"that I needed to build to the Simulator and not a real physical BlackBerry device. Here is a quote from the post of cdamus, which is where I found the solution:

  "A little trick to streamline your workflow: prospects for development C/C++ has a little"hammer"toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or several projects."  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build. »

  I took a screenshot to help indicate the setting that I need to use:

  

  Hope this helps you chuma and anyone else who has this problem. Thanks for the tip, cdamus!

• Unable to connect to the selected Mobile Data Service, please try again later.

  Dear all,

  I downloaded Blackberry email and MDS Services 4.1.4 and the Blackberry 9630 Simulator Simulator. I'm testing a blackberry asp.net application I have running on a test server using the blackberry Simulator.

  I have windows XP box. When I try to run the SDM Service, it runs without error, but acquire it on the site - http://www.blackberry.com/go/mobile - error saying above message - unable to connect to the selected Mobile Data Service, please try again later. How can I solve this problem, I tried to use full qualified names in the config file.

  Any ideas?

  NAV.

  Hi Nav, thanks for your message.

  When you use the BlackBerry 9630 Smartphone Simulator, you may need to change its default connection settings in order to provide network connectivity.  The reason why because the 9630, being a world phone, supports different types of network technologies and a configuration change may be needed to make it work with the MDS Simulator - CS.

  1. from the home screen, click the 'manage connections '.

  2. a popup window opens, select "Mobile Network Options '.

  3. in the options screen, ensure that the following field values are defined:

  • Data services = 'On '.
  • Network selection mode = "auto".
  • Technology network = "1XEV".

  4. close the 'mobile network options' screen to save the changes

  9630 smartphone Simulator should now have network connectivity.

  Sincerely,

  Adam

• Sometimes, JBoss is unable to connect to the server.

  JBoss connects during server re - start all the time. Errors in the journal are listed below. It seems that the ports are in use, but turn the server or JBoss service will solve the problem of connection. This problem occurs all the time. Sometimes of JBoss starts without any problem. This is a Windows Server 2003 and SQL 2005 environment.

  Caused by: javax.naming.CommunicationException: unable to connect to the 0.0.0.0:1100 Server [root exception is javax.naming.ServiceUnavailableException: unable to connect to the 0.0.0.0:1100 Server [root exception is java.net.ConnectException: Connection refused: connect]]

  to org.jnp.interfaces.NamingContext.getServer(NamingContext.java:254)

  to org.jnp.interfaces.NamingContext.checkRef(NamingContext.java:1370)

              ... more than 162

  What could be the problem?  Thank you

  Please use a tool like TCPView to see what processes running on your computer using port 1100:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897437.aspx

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect to the App Store and auto delete app

  Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

  First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

  Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

  If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?