Unable to find path error

Similar Questions

• I can see PC 'A' on a home network wireless secure PC 'B' but unable to connect; path error

  On PC 'A' I see 'B' PC and connect normally.

  PC 'A' is under Vista Home Premium; 'B' PC is running Vista Home Premium 64.
  Both systems have all the Windows updates current.

  This problem occurred after a repair and a reinstall of the OS/OEM on PC 'B' disc image  I have studied many guides of troubleshooting and everything seems to be in order.  Name of the Working Group, sharing files, exploration of the network, etc. are all correctly.  Shared folder names and computer names follow rules.

  I tried with, on and outside of the firewall.   I also tried to disable the anti-virus protection on both computers.

  The PC normally inaccessible 'B' appear in the router admin utilities.  No, there is an IP address conflict.  The drivers for my PC 'B' wireless card and the router is up-to-date.

  I tried to reboot the computers and the router and the modem without effect.

  I also tried remove the 'B' network and setting up again from scratch.

  Wireless signal is very strong, and I have no problem with internet on two PCs.

  I get the error message is so common that it is very difficult to sort through research on the internet; almost all subjects deal with the problem between different OS.  Here is the error message.

  "Check the spelling of the name. Otherwise, there could be a problem with your network. To identify problems with your network, click on diagnose.

  More > error Code 0 x 0070035 the network path was not found. »

  I have exactly the same problem with a 'C' also running Vista home Premium netbook.  'B' is displayed in the network, but are not accessible.

  Here's something that might be a clue: in the network, the computer 'B' is empty in the column: "network location".

  Is someone can you please help me understand this?

  Hello

  1. you are running Norton 360 on your computer?

  If so, I suggest to turn off the Norton firewall or configure it to allow other computers to connect.

  Also I suggest you to check the following services and ensure that they are enabled:

  Client DHCP (Dynamic Host Configuration Protocol).

  b. (Domain Name System) DNS Client.

  c. Server,

  d. support TCP/IP Netbios (Transmission Control Protocol).

  PING each computer by its Internet Protocol (IP) address, and if successful, PING by name. You can get the IP address of a computer by opening a command prompt (DOS window) and type IPCONFIG, follow these steps:

  a. click "start".

  b. on the box, type "cmd".

  c. on "cmd", press enter

  d. window will appear, there type "IPCONFIG".

  I hope this helps.

• IKE initiator unable to find the policy; Outside INTF, CBC: error

  I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.

  See the config of bdavpn1 #.
  : Saved
  : Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
  !
  ASA Version 8.2 (2)
  !
  hostname bdavpn1
  domain.com domain name
  activate the encrypted password of OSaXLnYQKkAcBhYA
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
  !
  interface Vlan3
  nameif dmz
  security-level 50
  IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
  !
  interface Vlan4
  Failover LAN Interface Description
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  switchport access vlan 91
  !
  interface Ethernet0/3
  switchport access vlan 3
  !
  interface Ethernet0/4
  switchport access vlan 3
  !
  interface Ethernet0/5
  switchport access vlan 4
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone AST - 4
  clock to summer time recurring ADT
  DNS domain-lookup dmz
  DNS server-group DefaultDNS
  Server name 172.20.0.99
  domain.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  object-group network Chicago-nets
  object-network 10.150.1.0 255.255.255.0
  object-network 10.150.55.0 255.255.255.0
  object-network 10.150.56.0 255.255.255.0
  object-network 10.150.57.0 255.255.255.0
  object-network 172.16.1.0 255.255.255.0
  object-network 192.168.26.0 255.255.255.0
  object-network 10.150.111.0 255.255.255.0
  the DM_INLINE_NETWORK_2 object-group network
  object-network 192.168.4.0 255.255.255.0
  object Group Chicago-nets
  the DM_INLINE_NETWORK_1 object-group network
  object-network 192.168.4.0 255.255.255.0
  object Group Chicago-nets
  the DM_INLINE_NETWORK_3 object-group network
  object-NET 172.20.0.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  the DM_INLINE_NETWORK_4 object-group network
  object-NET 172.20.0.0 255.255.255.0
  object-network 192.168.2.0 255.255.255.0
  outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
  inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
  inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
  inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
  inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
  Note to access list outside_to_dmz allow access to the citrix Server
  outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
  dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
  Note to outside_access_in entering of Citrix access list
  outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
  outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
  pager lines 101
  Enable logging
  timestamp of the record
  logging paused
  logging buffered information
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  IP verify reverse path to the outside interface
  failover
  primary failover lan unit
  failover failover lan interface Vlan4
  failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 625.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  Global interface (dmz) 2
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
  Access-group outside_access_in in interface outside
  Access-group dmz_to_inside in dmz interface
  Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication enable LOCAL console
  AAA authentication http LOCAL console
  LOCAL AAA authentication serial console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  LOCAL AAA authorization command
  Enable http server
  http 0.0.0.0 0.0.0.0 outdoors
  http 0.0.0.0 0.0.0.0 inside
  redirect http outside 80
  SNMP-server host inside 10.150.1.177 community survey * version 2 c
  SNMP-server host inside 10.150.2.38 community survey * version 2 c
  location of Server SNMP Hamilton, Bermuda
  SNMP Server contact René Bouchard
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Service resetoutside
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  inside
  redirect http outside 80
  SNMP-server host inside 10.150.1.177 community survey * version 2 c
  SNMP-server host inside 10.150.2.38 community survey * version 2 c
  location of Server SNMP Hamilton, Bermuda
  SNMP Server contact René Bouchard
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Service resetoutside
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto outside_map3 1 match address outside_cryptomap
  outside_map3 card crypto 1jeu peer 101.88.182.189
  outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
  card crypto game 2 outside_map3 address outside_2_cryptomap
  outside_map3 crypto map peer set 2 101.1.95.253
  card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
  Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map3 interface card crypto outside
  Crypto ca trustpoint bdavpn1
  Terminal registration
  domain name full bdavpn1.domain.bm
  name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
  Configure CRL
  Crypto ca certificate card domainincCertificateMap 10
  name of the object attr cn eq sslvpn.domain.com
  Crypto ca certificate chain bdavpn1
  certificate ca 00
  30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
  32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
  12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
  3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
  300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
  06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
  c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
  8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
  0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
  89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
  7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
  fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
  61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
  300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
  6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
  f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
  0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
  f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
  ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
  bedcbda7 caf46f0c b01def
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  crypto ISAKMP ipsec-over-tcp port 10000
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet 0.0.0.0 0.0.0.0 outdoors
  Telnet timeout 120
  SSH enable ibou
  SSH 0.0.0.0 0.0.0.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 60
  Console timeout 0
  management-access inside

  a basic threat threat detection
  threat detection statistics
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  prefer NTP server 192.168.2.116 source inside
  NTP server 192.168.2.117 source inside
  bdavpn1 point of trust SSL outdoors
  WebVPN
  allow outside
  enable SVC
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
  domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
  tunnel-group sslvpn.domain.com type ipsec-l2l
  sslvpn.domain.com group of tunnel ipsec-attributes
  validation by the peer-id cert
  trust-point bdavpn1
  tunnel-group 101.88.182.189 type ipsec-l2l
  IPSec-attributes tunnel-group 101.88.182.189
  pre-shared-key *.
  tunnel-group 101.1.95.253 type ipsec-l2l
  IPSec-attributes tunnel-group 101.1.95.253
  pre-shared-key *.
  tunnel-Group-map enable rules
  Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 10101
  ID-randomization
  ID-incompatibility action log
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the icmp
  inspect the icmp error
  inspect the amp-ipsec
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:a23ada0366576d96bd5c343645521107

  Scott,

  When you check the status of the two tunnels of the CLI, check the following:

  HS cry isa--> of his watch as active or QM_IDLE

  HS cry ips his--> shows the packages encrypted/decrypted

  The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.

  If this second tunnel is started but does not traffic, we might have a problem NAT or routing.

  Federico.

• SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  Hello

  our server gives error for 1 week now:

  SCSI: 4509: unable to find a path to the vmhba1:0:1 device in good condition. Try the vmhba1:0:1 path

  We have already tried updating ESX 3.5 patch 2 Patch 3 = & gt; no results!

  I'm really a noob VMWARE, our expert is on vacation

  other threads that I made these commands:

  esxcfg-mpath - l

  fdisk-l/dev/sda

  vmhba1 esxcfg-rescan

  I don't see any errors these commands of witch

  Please help me!

  Hello

  Your HBA fail no more. If there is a San, I would check to see if there's a cable problem and if so fix the cable, GBIC, card, etc. You wish to study the logs of your SAN network to get better information.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• iOS (iPad): error "Unable to find traits named" during the 'standard' generation only

  Hello

  I built an app with happiness on the desktop and the "fast" mode without any issue. However when I Isaiah to compile Standard mode I get the following error will appear:

  Exception in thread "main" java.lang.Error: unable to find named features: spark.components.supportClasses::StyleableTextField

  at adobe.abc.Domain.resolveTypeName(Domain.java:232)

  at adobe.abc.Domain.resolveTypeName(Domain.java:149)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveTypeName (GlobalOptimizer.java:272)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveSlotType (GlobalOptimizer.java:946)

  to adobe.abc.GlobalOptimizer$ InputAbc.resolveType (GlobalOptimizer.java:535)

  I think it has something to do with the fact that I have a preloader class with my request. Even if it is not necessary for the iPad itself, this app is cross-platform and is intended to be built as a standard swf for web use, so I would like to keep in there. I had to include the following two paths as records of CFCS in my way to build Actionscript-> library path in the project settings for it even compile in the first place:

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\libs

  C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\flex_sdk_4.6.0.23201\frameworks\locale\en_US

  So I suspect that they may have something to do with my problem. I use the latest released SDK Flex with Adobe Air Flash Buidler 4.6 3.4.

  I've seen tons of people complaining about this error when it comes to Air Native Extensions (ANE) but I do not write one. Someone has encountered something like that with just a simple app?

  Thank you!

  I solved the problem. I had to include manually in the source path C:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\projects\mobilecomponents\src, which is the case of the traits: spark.components.supportClasses life. When I tried with Flash Builder 4.7 or 4.04 FlashDevelop, I didn't have to do so I don't understand the inconsistency here. But at least it compiles.

• Error message - unable to find the proxy server - how can I solve this problem

  When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.

  Set not to use any proxy.

  Firefox> Preferences > Advanced > network > setting > don't score no proxy

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• Update Briefcase error message ' locate some files in the Briefcase have sync copies inaccessible. " Convenience stores are unable to find problems.

  Bugs in the Briefcase: 'sync Briefcase copy junior '.

  Laptop with Wndows 7 family Premium and Windows 7 Professional of office have full connectivity that I can see - network directory shows homegroup with Briefcase on the desktop; file sharing fully implemented. Update everything completely fails: error updating Briefcase ' locate some files in the Briefcase have sync inaccessible copies.» Convenience stores are unable to find problems. Rules for creating portfolio followed by help for towel.

  Hello

  I suggest you to see the link and check if this is useful:

  How to use the Briefcase feature

  http://support.Microsoft.com/kb/307885

  (Valid for Windows7)

  I hope this helps.

• Error ERR-1002 unable to find item for the 'ID' element ID in the application

  Hello world
  
  I'm new to APEX and I came across this error for the first time. I have a page with a classic report in it, and I want to create a link to one of the columns in the report (column ID) to another page with a classic report in it. So when I click on, say, ID 118, I want to be sent to another page and don't see ID 118 information.
  After you create the link in the column, I get the error message when I run the application:
  
  Error ERR-1002 unable to find item for the 'ID' element ID in the application
  
  I tried to create a link from one report to the other before and it worked fine.
  
  Thank you!
  
  P.S. I use APEX 3.2

  Then you must create an item called ID on your page 2 (hidden make) and the link will pass the value of the ID of the line picked up on this hidden item. Now in page 2 make your report filter query on id = P2_ID or another name that you use...

  Hope this helps,
  His

• Repeated cannot find symbol errors

  Hi, I'm a newb at blackberry JDE and java in general. I'm used to working to loosen typed and extended as php environments. I'm creating a simple application tasking to teach myself State and management of the data and other. I've made very little progress and I am already stuck. I looked through the blackberry API tutorial resources and searching the forums, but have been unable to find answers (probably seen them and just he did not know that I am so lost). I met two roadblocks in the following code, which intervened in the section highlighted with #. The following class is called by a class of application and built and tested successfully, without the sharps.

  1.) whenever I try to add whatever it is inside the class ButtonListener (by adding the code in force, that is), as a string, call a method or try to push something to the front of the battery of the display, I get the error 'cannot find symbol' during compilation. I guess it's a problem with the legacy of some sort, but I am totally lost and frustrated.

  2.) once it's resolved, I want to insert a switch statement where the # is to add and remove items from different field of the display depending on the value selected in the ObjectChoiceField itemTypeField. I think, I need to set the index of the choicefield initially and then retrieve it later, but I don't know how.

  Any help will be greatly appreciated.

  import net.rim.device.api.ui.*;import net.rim.device.api.ui.component.*;import net.rim.device.api.ui.container.*;import net.rim.device.api.ui.Manager.*;import net.rim.device.api.ui.UiApplication;
  
  /** *  */public class NewItemScreen extends MainScreen{    //Set Form Variables        private LabelField applicationTitle = new LabelField("New Item");        private EditField itemTitleField = new EditField("Title: ", "");        private String typechoices[] = {"Project", "Task", "Event"};        private ObjectChoiceField itemTypeField = new ObjectChoiceField("Type: ", typechoices, 0);
  
      public NewItemScreen()    {        super();        //Add to Screen        setTitle(applicationTitle);        add(itemTitleField);        add(itemTypeField);        //Set Listeners        itemTypeField.setChangeListener(new ButtonListener());       }
  
      //Implement Button Listener    private class ButtonListener implements FieldChangeListener    {        public void fieldChanged(Field field, int context)        {            if(context != FieldChangeListener.PROGRAMMATIC) // Perform action if user changed field.            {                if(field == itemTypeField)                {                    ####################                }            }        }    }}
  

  (1) can't find symbol error occurs when you create an instance of a class not created no where... Or the class path may not be configured correctly. Compiler isn't aware of the path where the classes... Also when we forget to import the required classes as well...

  if(context != FieldChangeListener.PROGRAMMATIC) // Perform action if user changed field.               {                    if(field == itemTypeField)                   {                            ####################                 }            }
  

  The first if the cheque is not necessary however... Also, I would say not to use the double equals "is" use as field.equals (itemTypeField)...

  (2) I did not understand, what exactly you need to...

  Thank you!

• Unable to find the component with an absolute reference

  Hello

  I have an RESP search page that has an LOV attached to the name of responsibility search column.

  The page works fine on my Jdev, when I transfer the files on the server and click on the page I get error below.

  
  

  «oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException: unable to find the component with an absolute reference = / win/oracle/apps/win/respmap/lov/webui/RespNameVORN, XML Path = null.» Please check that the reference is valid and the definition of the component exists on the file system or in the MDS repository. »

  
  

  The LOV RN xml is present in the location on the server. The page has been imported successfully, verified using jdr_utiils.print_document.

  I was impossible to import LOV RN xml using XML importing, throwing below error.

  
  

  < row 2, column 45 >: XML-20112: Error (fatal error) opening external DTD 'jbo_03_01.dtd '.

  WARNING: Could not find the level of customization of document value ' / victory/oracle/apps/victory/respmap/lov/Server/RespNamesVO.

  No Protocol: jbo_03_01.dtd

  
  

  The Oracle note Doc ID 848851.1 said you should not import the xml of region LOV separately, it is imported with page.

  Please help me to solve this error.

  
  

  Thank you

  Kalai
  

  
  

  Kalai,

  km1612 wrote:

  Command used with import error.

  ---------

  $ oracle.jrad.tools.xml.importer.XMLImporter java /DEVL/apps/comn/java/classes/win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml - username *-password *-dbconnection "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = *)(PORT=***)) (CONNECT_DATA = (SID = DEVL)))" rootdir - / DEVL/apps/comn/java/classes-rootdir/DEVL/apps/comn/java/classes

  ----

  Your LovRN file is /win/oracle/apps/win/respmap/lov/webui/RespNameVORN.xml

  Not /win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml

  If please change the XMLImporter with the correct file and try again.

  See you soon

  AJ

• Why is-Visa Interactive Control unable to find or load the visa library

  I'm using LabVIEW 8.5.1.  I recently installed driver VISA tektronix to connect with one of their products.  That has proved to be a bad idea.  I've uninstalled it one then installed VISA460, but when I try to write a labVIEW driver that communicates via RS232 or USB, I get this error:

  LabVIEW: (Hex 0xBFFF009E) VISA or a library of code required by VISA impossible situated loaded.  This is usually due to a required driver is not installed on the system.
  =========================
  VISA: (Hex 0xBFFF009E) a code library required by VISA impossible located or loaded.

  When you try to run an interactive control Visa I get an error saying unable to find or load the visa library.  Is there anything else I need to download?  Any help would be great. Thank you.

  I had already done this, but had no luck.  However, I could be back up and running using Msiblast.  This is a great little program.  So, if anyone has problems in the future, simply download Msiblast and delete everything has VISA inside and then run the Setup program OR Visa.  Thanks for the help.

• Unable to get the error Code Windows Update 0 X 80076424

  When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?

  Thank you

  Shashi

  Hi Shashipatel,

  1. were you able to download and install updates as soon as possible?

  2 are you able to verify updates?

  3. have you made changes on the computer before this problem?

  4. What is the error message or an exact error code?

  5. have you connected external devices other than the keyboard and mouse?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.