Unable to find the device id / install app via command line after ios6

Similar Questions

• Unable to find the devices on the network of field

  Hello

  I'm currently setting up a network of field. The problem I have is:

  After the reboot of the PS-2000, everything starts up as usual, but after 15 seconds, the A, B, C, D LEDs do not turn off, and READY LEDs on the IO modules never turn on. The STATUS LED does not blink, there is no specific errors. The POWER LEDS on the set of the modules is on. I am unable to use the FIND FEATURES within the NOT-MAX, a 'Connection Timed Out' (or something to that effect) error message occurs.

  I have correctly configured an IP address on the PS-2000, I am able to view the files on the Flash using the FTP transfer in NOR-MAX, I updated the Firmware LabVIEW RT v7.0.0. I tried to reinstall the firmwar
  e and resetting the PS-2000, but nothing helped.

  To simplify the issue, I unplugged the PS-2000 from the rest of the basics of connection. I inspected the
  pine trees on the side of the module and they looked fine. I couldn't find all other versions of the Firmware for the PS-2000 on the NI download site, just in case my version has been altered. With this configuration, the A, B, C, D LEDs are still on, and the FIND DEVICES (not that there there) always times out.

  Then I tried to plug in a FP-TB-10 (with only input modules out there, so that there would be no external power required), and I still have the same problems.

  Material used:
  PS-2000
  -2 * FP - TB - 10 popular with a mix of I/AO/DI/DO
  FP-QUAD-510
  -FP-PG-522

  Power supply:
  -Kepco power out 16 VDC and approximately 0.4 A (+ terminal connected to V and neutral terminal connected to C)

  Software used:
  -LabVIEW Professional 7 with RT
  -MAX 3.0

  Unfortunately most
  the user manuals still refer to the field Point, as opposed to the NOT-MAX Explorer.

  Any suggestions for my experiences above would be welcome! Is there anywhere I can download the firmware Lv7.0.0 RT? Everyone knows about similar problems with LV7?

  Thank you!

  I will answer this myself!

  The issue proved to be a limited set of software installed on the FP2000. When I was installing the software, setting up NO-MAX, the only available software is LabVIEW RT v7.0.0.

  When you install the software (from NOR-MAX) on the ps2000 for the first time, the following text should be available:

  -Control environment FieldPoint
  -Manager of VI FieldPoint
  -LabVIEW RT
  -RT OR Serial
  NI-VISA
  OR-Watchdog

  If none of them are not available, the module PS, or downloadable from the NOT-MAX, then not all device drivers have been installed on the PC.

  Use your device provided with LabVIEW drivers CD to install all the necessary drivers of RT.

• Impossible to uninstall a program error: unable to generate the uninstaller for ca aintivirus E9030 command line.

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Try this... no guarantee

  Start > computer > open C: drive > open the Progran files > y at - it a record of the Ca antivirus?
  If so, open it > is there a uninstaller.exe file here?
  If so, open it and let go about uninstalling.

  Or,

  Start > all programs > CA antivirus > y at - it an option to uninstall?

  Hope one of these AIDS.

• Create Tables with the project of database offline via command line

  Y at - it a there command-line tool that will allow me to deploy database objects that I defined in a project database offline in a target database? Something along the lines of ojdeploy. I want to be able to automate the creation /refresh of my db via the script items if the developers do not have to perform this task by opening jdev.
  
  Thank you
  Tony

  No, there is no (I answered on one of the other threads duplicate the OTN software is so fond of the creation to the present day)

• Unable to find the personal files and desktop wallpaper is changed after the installation of Service Pack 3.

  Original title: Service pack 3.

  My computer automaticlly installed Service pack 3 and when it was over installation and rebooted I couldn't come back, it only opens to the Welcome window that I tried to do it on safe mode, afew ways and all I would get was a mess, saying file is missing or damaged windows root>\system32\hal.dll. Please reinstall a copy of the above file, then there was another mess, saying load needed DLLs for Kerrnel. My computer would not shut off either Finally I held the off button down until it finally stops, then when I started it back up he did not return, but it wasn't the same startup window. There was another image of office programs on my desk were not all the same and all my photos are nolonger may not find them as well as some of my personal files that were no longer on my desk. is could someone please tell me what happened?

  Hi smittycindy,

  What steps you have tried to solve the problem?

  one) that you are able to boot to the desktop now, try to do a system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Device Manager: uninstall hpdm via command line

  Hello

  I have the role of gateway HPDM installed on 3100 guests.  I created a script to install the role, but I do not see a switch to uninstall the role.  Any Suggestions?

  John

  Hi John,.

  We do not provide control DM for uninstall. I would suggest that you use the windows command to remove the service

  1: sc stop HPDMGateway

  2: sc delete HPDMGateway

  3: reboot the system

  4: manually remove the files if necessary HPDM gateway

  Please try above the method on your test computer before applying it to the production.

• Scheduling of the VM to power off via command line

  Hello

  I have a guest linux VM on a Windows 2003 server that runs under VMware Player.

  Is there a a way to gracefully shut down the guest linux calendar by using the Task Scheduler windows for backup purposes?

  Or is it a feature reserved for other versions of VMware?

  Thank you!

  Take a look at Using vmrun to control Virtual Machines and schedule a task using vmrun with the stop command.  Note that VMware Tools must be installed for this turn off gracefully otherwise use the command suspends.

• LaserJet Pro M127fn Installer cannot find the device on the network

  Hello

  I just bought the product, but during the installation - setup is unable to find the device on the network. Device is properly registered to the address 192.168.0.14 (with static IP address), I can see the dashboard configiration at the same address via browser and all works well with the network itself.

  Try to ping the IP - it's ok. Tried to install without active firewall - also fails.

  Double checked the installation process - with automatic search and provide the IP address of the printer - both failed.

  Also, I rebooted the router and the switch and the computer. Is not new. I also tried downloading the last executable configuration on the site - and even once, it fails with 'device not found on the network.

  Then what do I do to fix this?

  Thank you

  Finally found a solution. It is strange as it may seem, but after all, it's a solution.

  -Rinse your DNS and your ARP cache (see the Google if you don't know what that means)

  -Reboot the router (or, where appropriate - switches)

  -Change the IP address of the device on your network. Try with round numbers like (192.168.0.20)

  -Restart your router (and if applicable - switches)

  -Restart your computer (s)

  -Don't run the Setup again and the hoprefully you will have no errors and everything works perfectly for you

  If your problem, similar to mine, persists, repeat the above process again and again... and again...

  Good luck

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Installed Windows 7 on my HP Compaq nw8440 but unable to find the drivers that only Vista drivers are ther

  I just install Window 7 Home Basic Edition as final Version was my HP Compaq nw8440 too slow. After installation, I am unable to find the drivers and all drivers available for Windows Vista. No driver VGA, No Finger Print etc. And the Internet is also working slowly well my connection giving the same speed. Please help me

  You are the very welcome.

  I do not take up that simple...

  Try the driver windows 7 for her at the link below and you will need the W7 software protect tools because I do not think the Vista software works.  Ditto for the quick launch buttons.

  These drivers have been extracted from the 6910p who was the first series HP business notebook, support for windows 7 and the one that follows in the line after the nc6400 (the 14.1 "model of your screen).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-66699-1&prodTypeId=321957&prodSeriesId=1839152

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&taskId=135&swItem=ob-78740-1&mode=3

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3357377&prodNameId=3357378&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-77198-1

  Paul

• I'm unable to find the missing drivers on my device manager.

  OT: Re: lack of pilots.

  Hello

  I'm unable to find the missing drivers on my device manager. A unknown device watch. Other shows, like in the storage controllers. I checked Windows update, but it does not find the missing drivers. I don't have the drivers on my CD.

  Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model. If the report is in one language other than English, please indicate the language.

  For assistance OneDrive see paragraph 9.3

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

  Try to install a Windows Vista driver if there is no native driver Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Tecra A2 - audio lost and cannot find the device

  The other day, lost all the sounds on the laptop. Nothing else did it and no new software has been loaded for possibly in conflict or cause a problem. Have you tried to uninstall and reinstall the driver and add hardware (Media Audio Controller) even one time, but system now can't find the (impossible to install this hardware) device.

  You have any recommendations as to the difficulty.

  Thank you
  phwoodford

  Hello

  Have you tried reinstalling the audio driver with the driver of one or the other of Toshiba?

  In addition, it would be interesting to know what operating system you have.
  There is a yellow exclamation marks in Device Manager now?

  Maybe you should try to update the BIOS too. If it doesn t work it seems to be time to reinstall Windows. Maybe something messed with the registry or the system.

• I can't find the button to install previous versions of Office creative cloud applications.

  

  I can't find the button to install previous versions of Office creative cloud applications.

  Help me please

  I want to install after effects cc 2015, or 2014

  I hate after effects CC 2015.3 l

  You cannot install previous versions with a trial.  You must have a subscription.

  with a subscription, just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

• Unable to find the component with an absolute reference

  Hello

  I have an RESP search page that has an LOV attached to the name of responsibility search column.

  The page works fine on my Jdev, when I transfer the files on the server and click on the page I get error below.

  
  

  «oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException: unable to find the component with an absolute reference = / win/oracle/apps/win/respmap/lov/webui/RespNameVORN, XML Path = null.» Please check that the reference is valid and the definition of the component exists on the file system or in the MDS repository. »

  
  

  The LOV RN xml is present in the location on the server. The page has been imported successfully, verified using jdr_utiils.print_document.

  I was impossible to import LOV RN xml using XML importing, throwing below error.

  
  

  < row 2, column 45 >: XML-20112: Error (fatal error) opening external DTD 'jbo_03_01.dtd '.

  WARNING: Could not find the level of customization of document value ' / victory/oracle/apps/victory/respmap/lov/Server/RespNamesVO.

  No Protocol: jbo_03_01.dtd

  
  

  The Oracle note Doc ID 848851.1 said you should not import the xml of region LOV separately, it is imported with page.

  Please help me to solve this error.

  
  

  Thank you

  Kalai
  

  
  

  Kalai,

  km1612 wrote:

  Command used with import error.

  ---------

  $ oracle.jrad.tools.xml.importer.XMLImporter java /DEVL/apps/comn/java/classes/win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml - username *-password *-dbconnection "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = *)(PORT=***)) (CONNECT_DATA = (SID = DEVL)))" rootdir - / DEVL/apps/comn/java/classes-rootdir/DEVL/apps/comn/java/classes

  ----

  Your LovRN file is /win/oracle/apps/win/respmap/lov/webui/RespNameVORN.xml

  Not /win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml

  If please change the XMLImporter with the correct file and try again.

  See you soon

  AJ