Unable to get a CD-ROM to start. Is a graphics card an external device or that should already be in my system?

Similar Questions

• I am unable to get my CD-Rom drive in Windows 7.

  Hello. How to make a cd rom to run on windows 7? I can't for the life of me get by. gruff, the CD can be played on a windows uodated version? Help, please! I tried troubleshooting, but it did not help. Thank you

  original title: CD Rom compatibility with windows 7

  Hello hZL,.

  There is no "generic" setting, but I wonder how old it is and if it is actually compatible with Windows 7. It seems that the problem lies in the software, not, as we thought the CD-ROM. You may need to install an application on the CD before you can actually use the CD itself. If the software is really old, then he can simply not be compatible with Windows 7 in which case you may need to upgrade the software, if this is possible, of course.

  The software runs under Windows Vista? If so, it should work on Windows 7. The software works on Windows XP? If so there could be a compatibility issue with Windows 7. As a suggestion, assuming it worked on Windows XP you have tried to install the application in compatibility mode? You can access the file "setup.exe", you say? If so right click on this file and in the dropdown menu, select Properties. In the properties, click the Compatibility Mode tab, place a check in the box "run this program in compaitibilty mode for" in the box below, and then select XP (XP should already be selected, but if it isn't, click on the arrow to the right of the dialog box and select it from the list.) The software installation file should settle now.

  If this does not work then you may need to contact the software manufacturer to see if they have versions of Windows 7 that you can upgrade.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Alienware Aurora r4 does not start with new graphics card.

  Hey,.

  I have an alienware aurora end of 2012 I believe.

  I currently have a series of 6800 AMD raedon graphics card, processor 3930 r9 k i7 and 8 GB of ram.

  I recently bought a MSI gtx 970 game to replace my old graphics card. I plug this card and it even lights up when I turn on the computer, but however my pc only happens to the start screen where I get the choice after pressing F2 and F12 and then freezes and I can't do anything. I then hear 3 beeps of inside my pc and then it proceeds to a blackscreen where my only choice is to turn it off manually.

  I tried to uppgrade my BIOS without much success (dident make it work), uninstall all graphics drivers from AMD, but nothing has changed.

  So I'm clueless I'm kinda a noob of the pc and have no idea what could cause this and would love help to explain what happens if all goes well if anyone knows a fix.

  THX in advance :)

  You you connected all power cables required PCIe 970? They are probably different config as AMD-6800. You should have 875w PS, but you might need to check that.

  Probably should have uninstalled AMD Driver Suite (catalyst) before removing the card from AMD.

  If card MSI BIOS a double switch, you can try another position.

  Try Mode Windows safe.

  What operating system do you use? Are you running the UEFI BIOS or legacy Mode?

• Get the 43 pilot error after installing new graphics card

  Original title: graphics card problem

  Help, please. I just put in my new nvidia Geforce GT 430 graphics card. It came with a disc that would install all necessary records, when the computer has restarted a message says that the driver has been arrested because of his mistake, 43. I don't know what to do to solve this problem. just in case my processor CPU Intel Celeron D 3.33GHz and has a 32-bit operating system. What should I do?

  Hello

  / Settings (BIOS/CMOS) often F2 as you start so watch the display as you start
  the computer. You may need to check with the system manufacturer (Motherboad support
  If a system custom Maker), their documentation online and drivers and ask for their
  Forums (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm unable to get a signed application to start

  I built a small built-in browser JavaFX application that uses a "FileChooser" element to access a file on the desktop.
  
  I'm fairly certain that this file access will require the application must be signed, what I did with a real certificate. (I also tried with a self-generated certificate too, with the same results.)
  
  The problem is this race, that it results in an error in the browser:
  "Run-time error. Click for more information"(Firefox)
  
  Or on IE:
  «JavaFX application failed to launch because of the configuration of the system (error show Invisibles).» See java.com/javafx for troubleshooting information. The 'details' really say anything in particular that gives me a clue.
  
  I get the result even if I try to run the application directly from Netbeans. However, if I deselect the option "Request unlimited access" in the project properties, the application will run (from Netbeans as well as deployed on a server), but the file you choose won't work, because of a security violation.
  
  Can someone tell what I am doing wrong? I guess that these signed applications should work at this point. Maybe it's something in my code, but I'm a little bit lost at the moment.

  With the #1 option - I have modified and rebuilt the pots 3 rd-party and them referenced in NetBeans. When I choose clean and build, the treated Ant produces an error: "jarsigner returns 1. So it doesn't seem to work at all.

  As long you have re-built the jars properly without the original signature, I think it should work.
  Here is an example of unsigning a pot using Ant:
  http://Frank.zinepal.com/unsign-a-jar-with-Ant

  Don't you think that the idea of multiple-JNLP would work if NetBeans applies to "my" signature for 3 rd-party bribes? Apart from manually copying the original pots in the \dist directory, is there a better way to tell NetBeans to leave the JAR 3 rd-party only (IE, not to sign again)?

  I think it is supposed to work (this is the mixed code signing situation I mentioned in my previous post).
  For example, from your description that looks like the build of NetBeans default can't really not this type of deployment, so you should create a custom version that does what you need and are not triggered by NetBeans - what is feasible, but boring - it's looks like you tried this, but have been unable to operate as expected. For NetBeans specific help, you better post to a forum of NetBeans (although you might be only the second person who tried to do it with a JavaFX application).

  You should also check that the end-user experience is acceptable, because I think that the dialog box and alert to the situation of mixed code management is different.

  Search the section deployment guide "use for the descriptors of the Extension"-I think it documents how to do what you want if you are using a rather custom build file to let the NetBeans to do the work:
  http://docs.Oracle.com/JavaFX/2/deployment/javafx_ant_task_reference002.htm#CIABGCEE

  Hmm, a lot of running to walk around to deploy an application that can open a file...

• I reinstalled Windows XP on my computer and it went well until I started and it requires the ID of the product that I already entered. But it gives me no place to enter the ID

  A virus has wiped out my records that "remembering" passwords and settings so I reinstalled Windows XP in order to fix things.  The installation went well; He asked my product ID, I entered, he agreed and installation (continued).  He worked all night and this morning my desktop image was rising, but no icons and no other activity.  I waited 4 hours and turn the machine off.  When I restarted it allows me to enter my password and then said: "you must first activiate this copy of Windows to continue."  Enter your product ID now? "I say Yes and it starts up less of my desktop icons.  The start menu does not appear and there is no room for re - enter the code.  Any help would be appreciated.  A big thank you James Ready

  Call using manual phone Activation from Microsoft (free)

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  No real additional info:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d

• How to get the right drivers for ati mobility radeon graphics card 9200 after updating to windows 7

  I bought a laptop computer, an HP Compaq nx7010.  This has been upgraded to windows 7, but the graphics are bad.  There is a sticker on the unit: Graphics by ATI Mobility Radeon 9200

  How can I get the correct driver to get corrected the desktop resolution? Everything is tense or too big.

  Driver update tools keep telling me this is an adapter to graphics standard VGA etc and if I try to update the adapter it device manager says that they are up to date.

  It's frustrating

  Hello:

  I think that Erico post driver will work, but it cannot simply install by running.

  Download it and run it.  If IT errors out or is not installed, then this:

  Go to Device Manager and click on the VGA Standard controller.

  Then click on the driver tab, click on set to update driver.  Select the 'Browse my computer for software' and navigate to the installation folder that was created when you ran the driver.

  This file will be located in C:\SWSetup\sp30204.  Make sure that the include subfolders is selected and I hope that the driver will be installed.  If this isn't the case, you are unfortunately out of luck.

  The video card in your laptop (Mobility Radeon 9200) is not Direct X 9 capable it is why it does not work.  In other words, it is not windows vista or windows 7 capable.

  If you are able to get the driver to install to be able to change your resolution, which is the best you can do.

  You don't have Aero with this adapter - never.

  Whenever someone plans to upgrade a PC older than one made in 2006, it is essential for them to run the free Windows 7 Upgrade Advisor to avoid disappointment.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Paul

• How can I get my CD-ROM to work?

  I get an error code 10

  How long did it that the disc has been cleaned?  It could be as simple as that.  Here is a link with the other info

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/i-am-unable-to-get-my-CD-ROM-drive-to-work-in/467f67db-b289-49BD-8C2A-dce95d482445

  Good luck.

• Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Update for Sierra and now my Apple music does not appear I have a subscription and I am unable to get my music on the cloud?

  Hey there Scotchman2926,

  I understand that you are experiencing some problems with Apple music on Sierra. I have a few suggestions to help you solve this problem. First of all, if you are unable to access the iTunes Store as well as music from Apple, use the information in this article to help resolve this problem:
  

  If you cannot connect to the iTunes Store - Apple Support

  If this does not resolve the problem, you might try signing out of your Apple ID in iTunes and then connect again.

  Thanks to be come to the communities of Apple Support and let us know how it goes.

  See you soon.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Unable to get the upgrade to Windows 7 purchased to start

  I bought an upgrade to a provider. I have acquired a product key. I invoke Windows Anytime Upgrade according to the directions and the only option is to upgrade to Vista. Then I went to the Microsoft page to buy the product. I have Vista 64-bit with all updates installed on my Toshibe Satellite computer. I ran the Upgrade Advisor and everything was satisfactory.

  Unable to get the upgrade to Windows 7 purchased to start

  I call Windows Anytime Upgrade according to the guidelines

  I have Vista 64-bit

  Windows 7 anytime upgrade: you have Vista or XP currently installed?

  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.

  You can buy Windows 7 here:

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  Custom installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Unable to get the error Code Windows Update 0 X 80076424

  When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?

  Thank you

  Shashi

  Hi Shashipatel,

  1. were you able to download and install updates as soon as possible?

  2 are you able to verify updates?

  3. have you made changes on the computer before this problem?

  4. What is the error message or an exact error code?

  5. have you connected external devices other than the keyboard and mouse?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Unable to get the windows updates, it returns an error (often 0x8007043c and other similar)

  Original title: can't get windows updates

  I was unable to get the updates of windows - via the feature of automatic update, or through the manual method to access microsoft.com.  When I go to the microsoft update Web site, and it starts to scan my PC, it returns an error (often 0x8007043c and similar).  I tried to run Microsoft FixIt.  It tells me that windows up-to-date devices require to be repaired, but when I run the repair (problem-solving), he continues to run for hours and hours and doesn't do a thing.  How can I remove the software from the Windows Update Agent from my PC and reinstall a new version?

  Hi JosephGPhD,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

   

  Method 2: If the method above does not help then you can see the article mentioned below and check.

   

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• I'm unable to "get out" of the language bar to appear in my taskbar.

  Missing language bar

  Hi all, hope someone can help me solve my problem here. I m unable to "get out" of the language bar to appear in my taskbar. I followed the instructions in the window help by installing the language, but it seems that the "language bar" is not available on my toolbar option.

  tulipmelody, the links provided are order of registry editing which can be placed in the Notepad and run as a batch file.

  Before I provide you with detailed instructions on how to do it, I want you please check and make sure you have an additional language added to the keyboard settings, without him the language bar will not be an option in the menu of the taskbar.

  Add to James's message, follow these steps:
  Click Start-> Control Panel-> regional and Language Options.
  Click on the "Keyboards and languages" tab and then click on "change keyboards.
  Here the tab general, you need to add a secondary language to your keyboard, otherwise you will not be able to display the language bar. To do this, click Add and select the language you want to use, click OK.

  Once you have verified this, I can then provide you with more details on editing the registry. Of course, we want to ensure that it is not necessary first, as other options to resolve this problem. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.