Unable to get the values of FixedCost

Similar Questions

• Unable to get the values of the attributes of the Annotation VM Notes and Custom (product)

  Hi Experts,

  Need help to enter the values of the following custom attribute annotation is my script. No problem collecting other information.

  below is the codes where im having issues. There is no output for the VM Notes and the product.

  @{N = "VM Notes";} E={$_. Summary.Config.Annotation}},

  @{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty

  $_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.

  Below is the script when the above code is integrated.

  $vCenterServerName = "test.com"

  SE connect-VIServer $vCenterServerName - xxx-xxxx password user

  $SMTPServer = "xxxx".

  $ToAddress = "xxxxx".

  $FromAddress = $vCenterServerName + "@xxx.com.

  $Subject = ' report VMPath for all VMs in vcenter - tpe.corp.kazootek.com.

  $date = get-Date-format-M - d - yyyy

  $reportlocation = "C:\test\vcenter-xxx-vmpath-$date.csv".

  $vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',' Runtime.Powerstate ',' Summary.Config.Annotation '.

  # $report = C:\test\tpe_mate1.csv - UseCulture | %{

  $report = get-View - ViewType VirtualMachine-property $vmFields | %{

  $esx = get-view-id $_. Runtime.Host - name of the property, material

  $_ | Select Name,

  @{N = "VM Notes";} E={$_. Summary.Config.Annotation}},

  @{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty

  $_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.

  @{N = 'Template'; E={$_. Config.Template}},

  @{N = 'Center'; E = {}

  $obj = get-view-Id $_. ResourcePool-name of the Parent property

  While ($obj - isnot [VMware.Vim.Datacenter]) {}

  $obj is get-view $obj. Parent - the Parent property name

  }

  $obj. Name

  }},

  @{N = "Cluster"; E = {}

  $obj = get-view-Id $_. ResourcePool-name of the Parent property

  While ($obj - isnot [VMware.Vim.ClusterComputeResource]) {}

  $obj is get-view $obj. Parent - the Parent property name

  }

  $obj. Name

  }},

  @{N = 'Host'; E = {$esx. Name}},

  @{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},

  @{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.

  @{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},

  @{N = "Powerstate"; E={$_. Runtime.PowerState}},

  @{N = "Path"; E = {}

  $current = get-view-Id $_. Parent - the Parent property name

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent - the Parent property name

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  @{N = "FolderId"; E={$_. Parent.ToString ()}}.

  @{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},

  @{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},

  @{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}

  }

  # }

  $report | Export-Csv $reportlocation - NoTypeInformation - UseCulture

  Write-Host "Report exported to csv file" + $reportlocation

  Send-Mailmessage-to $FromAddress - to $ToAddress - subject $Subject - $reportlocation - SmtpServer $SMTPServer attachments

  Write-Host "report was sent by E-mail to '$ToAddress' to ' $FromAddress

  You must add the $vmFields variable AvailableField and CustomValue

  $vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',.

  'Runtime.Powerstate ',' Summary.Config.Annotation ',' AvailableField', ' CustomValue.

• ADF 11 g: unable to get the value managed bean

  Hello
  
  I am facing a strange problem in ADF 11 g.
  The backup of my main page bean is known as MainC.java
  From this file, I am setting some parameters in a file called PIn.java (PInis a simple bean with getter and setter methods)
  Code parameter set is running successfully to support bean (MainC.java).
  But when am retrieving data I'm not getting any value.
  
  I tried the same thing by using a java class instead of backing bean, but there, too, the problem is same value sets but not able to recover.
  
  My faces - config.xml is to be entered for the managed - bean PIn.java and I have tried with all eligible scopes for the bean.
  
  Please give pointers to resolve this problem.
  
  Thanks in advance

  SRY... my mistake :-)

  FacesContext context = FacesContext.getCurrentInstance();
  HttpSession session = (HttpSession)context.getExternalContext().getSession(true);
  sessionInstance = (PiV)session.getAttribute("PiV");
  if(sessionInstance == null) {
      sessionInstance = new PiV();
      session.setAttribute("PiV", sessionInstance);
  }
  

  The clause if the new statement was erroneous. It has been created a new body, whose only knews by your method :-) Now your variable overall "sessionInstance" has been completed.

  Majo

• Unable to get the values of the variables of group

  Hello try to learn writing scripts;

  Cannot read variables from the Panel; He reads only the first definition of the default variable. What I am doing wrong?

  Here I would like to read wvalue and hvalue , but in main function, it always shows the first wvalue/hvalue '... It does not update until the user changes the.

  #target photoshop
  var wvalue =1;
  var hvalue =1;
  var docRef = app.activeDocument;
      var dlg = new Window('dialog', 'Test',[100,100,380,280]);
      dlg.mspanel = dlg.add('panel', [25,15,250,150], 'Test Panel');
      dlg.mspanel.widthtext = dlg.mspanel.add('statictext', [15,17,50,37], 'Width:', {name:'widthtext'});
      dlg.mspanel.widthdivision = dlg.mspanel.add('edittext', [60,15,90,35],wvalue, {name:'widthdivision'});
      dlg.mspanel.heighttext = dlg.mspanel.add('statictext', [100,17,140,37], 'Height:', {name:'heighttext'});
      dlg.mspanel.heightdivision = dlg.mspanel.add('edittext', [150,15,180,35],hvalue, {name:'hdiv'});
      dlg.mspanel.okbtn = dlg.mspanel.add('button', [15,50,180,75], 'Ok', {name:'ok'});
      dlg.mspanel.cancelbtn= dlg.mspanel.add('button', [15,85,180,110], 'Cancel', {name:'cancel'});
      dlg.mspanel.okbtn.onClick = main;
      dlg.show();
      function main() {
      alert(wvalue);
          dlg.close();
      }
  

  OK found;

  I should have written;

  wvalue = dlg.mspanel.widthdivision.text
  

• Unable to get the values of 'Snap' slide to always marks graduation (solved with the answer if anyone wants to know).

  Hi all

  Cursor (JavaFX 2.2)

  has a method called "snapToTicks" that I put real in my document FXML both within my IDE.  Now, the thing is when I click on the cursor, it will go to the nearest graduation; However when I drag my slider he slide normally.

  I have 0-5 major ticks, 0 minor graduation, so it should be easy to align with each of them, and if I add ticks minor it will jump to those.

  I'm assuming that's what this method is supposed to do, but is there a way so that it can align when manually drag you?

  I have also tried to block increment, but this doesn't seem to change anything? According to this, it seems that the distance of the secondary graduations?

  Thank you

  ~ KZ

  Right then I thought about it lol, so rather than remove this I thought that after she.

  Slider.valueProperty () .addListener (new ChangeListener)

  {

  public void changed (ObservableValue ov, old_val, new_val number number)

  {

  Slider.setValue (new_val.intValue ());

  }

  });

• Unable to get the value of the variable to help assess...

  < cfcontent type = "application / vnd.ms - excel" >
  < cfset count = 0 >
  < cfloop index = 'Add' from = '1' = '1' = '1' step to >
  < cfset count = count + 1 >
  < cfset number = ' Form.inj_ #count # ' >
  < cfset #Number = num # >
  < cfset tick = "Form.tick_ #count # ' >
  < cfset sk = #tick # >
  < cfset quality = "Form.quality_ #count # ' >
  < cfset #Quality = qa # >
  < cfset description = ' Form.description_ #count # ' >
  < cfset of #description = # >
  < cfoutput >
  < table border = "1" width = "100%" >
  < b >
  < td align = "center" > #count # < table >
  < td align = "center" > #Evaluate ('sk') # < table >
  < td align = "center" > #Evaluate ('qa') # < table >
  < td align = "center" > #Evaluate ('a') # < table >
  < /tr >
  < /table >
  < / cfoutput >
  < / cfloop >

  Having very little idea of what you're trying to do, that looks like a classic case where the table notation would be used.

  
  
  
    
    
  
  
  #count#
  #Form["tick_" & count]#
  #Form["quality_" & count]#
  #Form["description_" & count]#
  
  
  
  
  

  That's my best guess to translate your very confusing code.

• The search filter - how to get the value of the metadata entered by the user

  Hello
  
  I wrote a fixUpAndValidateQuery filter where I want to modify search QueryText.
  
  I tried to update some of the metadata values entered by the user and then let the fire search query.
  But I'm unable to get the values of metadata user has entered in my java code filter.
  I'm getting like below
  
  DocType string = binder.getLocal ("dDocType");
  
  It returns the value "no" even if the user gives the value of the Doctype in the search engine.
  
  Am I missing something here?
  
  Kind regards
  Rajendra

  Search filters tend to manipulate the query that ends up being called by the search service. If this isn't what you're trying to accomplish there are probably better filters for you before the actual query is run or after the query is executed.

  If you really need a connection of database at the moment and you can't find a better filter for what you're trying to do that has a database connection, you can always create one like:

  final Provider dbProvider = Providers.getProvider("SystemDatabase");
  final Workspace myWorkspace = (Workspace) dbProvider.getProvider();
  

  Warning: If configure you your own db connection for a filter where no database connection is available, you will need TO release the connection too.

  myWorkspace.releaseConnection();
  

  Published by: fscherpe on February 16, 2011 06:07

• Get the value of the portfolio-parent

  Hello

  Sorry, I'm in trouble explaiing what I want to do, but I'll try my best.

  I have four 'levels' portfolio and ideally, I would like to have a user select a year in the high parent page and have it spread down to the forms under.  I went as far only to create a category for all portfolios that accesses the value of parents above him.  Once on the level of form, I am unable to get this value.  I guess that the getHomePortfolio method does not once on the level of form, but I don't know.

  Unfortunately it doesn't seem to be the documentation with examples on how to use the functions at all so I'm poking around in hopes of understanding how everything fits together.  Unfortunately, I was in it for a year without any chance to find the most of.

  Does anyone have information on how I can create a global variable that is accessible from any level?

  Thank you.

  No, just another way to get the desired response. Probably you won't need the audit NaN since your RegEx is specific enough that it will return only an index for any string of 2000-20 to 2099-20.

  I suspect that you will need a text category for each position of FY you need year and add the "FY" + starting value of the year.

  V/r,

  Gene

• Cannot get the value of the selection of OAMessageChoiceBean

  Hello
  
  Of our 11i to R12 upgrade, in the customer's advanced search page, we are unable to get the handle suitable for OAMessageChoiceBean (in extendedCO).
  
  The snippet for the bean handling is as follows:
  
  OAMessageChoiceBean PartyStatusFilter = (OAMessageChoiceBean) vOAPageContext.getRootWebBean () .findChildRecursive ("xxfeF426PartySearchStatus");
  String xxTest = PartyStatusFilter.getSelectionValue (vOAPageContext);
  
  The value of the above xxTest (in R12 approx.) is coming with a null value. Considering that the same code works in 11i environment and the xxTest output = "A".
  
  So we cannot get the value of the selection of the messagechoicebean in our environment of R12. I already looked in previous similar positions in this forum, also tried to use getSelectionText (vOAPageContext) or getSelectedValue(), however, it did not work.
  
  Pointers please?
  
  Thank you very much
  Zahid

  Hi Zahid,

  Try with this ID = HzPuiPartyStatus

  -Had

• need help to get the value using the REGEXP_REPLACE function.

  I am trying to extract the value placed between "< listitems >... < / listitems >" but I am unable to get these value using the REGEXP_REPLACE function.
  

  select REGEXP_REPLACE('<InputParameters></ParamSet><listitems>14545454</listitems></ParamSet></InputParameters>'
  ,'(<InputParameters>.*<listitems>)(.*)(</listitems>.*<InputParameters>)'
  ,'\2') from dual;

  required output:
   1454554

  Can someone please help me achieve this goal.

  Hello

  You forgot the / before the last InputParameters. If fix you that, your code will work.

  Here is a slightly different way:

  SELECT  REGEXP_REPLACE ( '14545454'
                   , '^.*?(.*?).*$'
                   , '\1'
                   )     AS listitems
  FROM    dual
  ;
  

  Least to type, the less likely you will have to make typos.
  If there are 2 (or more) elements of listitmes, 1 will be returned.

  From Oracle 11.1, you can also use REGEXP_SUBSTR. I have Oracle 10.2 avaialable now, so I can test the following, but I think you'd say:

  SELECT  REGEXP_SUBSTR ( '14545454'
                   , '(.*?)'
                   , 1
                   , 1
                   , NULL
                   , 1
                   )     AS listitems
  FROM    dual;
  

  When it comes with the text that is or looks to, XML, consider using XML functions.

• Initializer for 'color': unable to analyze the value of type uint text "colorUint".

  What is wrong with my code? I get this error:

  Initializer for 'color': unable to analyze the value of type uint text "colorUint".

  Code:

  public static void convertStringToUint(value:String,_mask:String):uint
  {
  var colorString:String = "0 x" + value;
  var colorUint:uint = mx.core.Singleton.getInstance("mx.styles::IStyleManager2").getColorName (colorString);
  
  Return colorUint;
  }

  
  < s:Button id = "Battery" x = "10" y = "44" width = "60" height = "30" label = "Battery" fontSize = "10" color = "colorUint" / >
  

  -Data binding will not be able to detect assignments to "colorString".

  Means that you must add [link] to the variable.

  [Bindable]
  public var colorString:String;
  

  Other issues, is that a chain is not a uint.  A uint is a numeric value.  So, after you have created your color of string value, you must typecast as a uint.

• I'm unable to get the registration code for my Blu - Ray player

  I'm unable to get the registration code for my Blu - Ray player. I followed the instructions and all I get is the statement: device is registered. I can't register for the most part without a valid code. Please let me know how I can get the correct code. Thank you

  If you were able to enter the registration code the first time you tried to save the player before then you don't need to do it again. Just bought this drive? If so, was it a screen or mixed open-box model?

• Unable to get the Bluetooth Toshiba BT Stac Headset profile in collaboration with mic

  Hello.

  I have problems with my Motorola HT 820 Stereo headset, the Toshiba Bluetooth Stack installed on Vista Home Premium 32 bit laptop.

  I am unable to get the microphone to work at all, so can't use it for Skype / VOIP calls etc. Features such as the A2DP and AVRCP work very well, and I can listen to music via the media player without problems.

  I read in a FAQ on this site, to make sure that I use the installation option custom rather than the quick installation when adding the device, but it seems to make no difference, am I missing a step here?

  In the properties of the device Windows registry, I see the option listed for Bluetooth Mic, but even assigning as device by default does not work.

  I know to plug my headphones on my desktop PC that uses the bluetooth stack Widdcom, can I use the headset/microphone function, but this battery seems to work differently, as I can select option headphones in the bluetooth settings, but I don't see such an interior option Toshiba stack - and I think that's the problem.

  I've updated to the last stack of Toshiba on this website, but this did not help at all.

  Here, any help would be appreciated.

  Concerning

  Matt

  Post edited by: Toxyturvy - wrong spelling

  Hello Matt

  Unfortunately I can't help you with that, but if I remember right here on the BT section that someone has already asked something similar. Please take a little time and see the BT section on this forum.

  You can also visit the FAQ section on http://aps2.toshiba-tro.de/bluetooth/
  Might find something there.

  Good luck!

• Is it possible to get the value of the resistance of a circuit with NI USB-4065 USB without using studio measure?

  Hi, I'm working on a project where there partly to measure resistance values in different parts of the circuit. Now, the company where I work currently at wants to get the NI USB-4065 USB. I use visual studio 2005 c# to develop applications and I need to know if I needed measurement studio or are there drivers (dll) just to get the values of resistance and General measures of circuit. I have need the controls or anything, just to programatically read the NI USB-4065 USB key values when I need the application.

  Any help would be appreciated. Thank you.

  Yes, you can have several NI 4065 DMM in your system. When you use the API OR-DMM, you open the handles separately for each DMM by using its name. His name can be configured inside the measurement and Automation Explorer (MAX).

  In addition, you can go ahead and install OR DMM today. It is downloadable for free on ni.com. NOR-DMM (and most of the pilots NOR) supports the simulation. You go to MAX and create your simulated three 4065 s. Then you can start writing your program now. Since these devices are simulated, they will not return the real tensions (obviously) and that it won't react realistic hardware triggers if you use (obviously), but they are pretty close to the real deal to allow you to write a lot of code and become familiar with the API. No need to wait until you get the material - you can be really ready for it by using the simulation.

• Scatter chart: get the value of the label XYcursor

  Measurement Studio Visual Studio Professional 2012 2013 using,.

  On a scatter chart, it is possible to get the value of the actual label for a xycursor?

  For example, my label displays a date-time on the X axis format, it looks like: [04: 35:49; 0,27101]

  It is possible to get this value? For example, if I want to display in a TextBox?

  I am able to get the xycursor. Which and xycursorYposition but not what I want.

  Thanks for any help!

  Here is a solution to my question:

  {

  Get xy cursor index of the point in plot
  int index = xyCursor1.GetCurrentIndex ();

  Get values at that time (in the plot)
  Double x;
  Double y;
  scatterGraph.Plots [0]. GetDataPoint (index, ByRef x, y);

  X value to the DateTime format & convert to the format of the time
  DateTime t = (DateTime) NationalInstruments.DataConverter.Convert (x, typeof (DateTime));

  string time = t.ToString("hh:mm:ss");

  }

  It is also possible for which xycursor and convert it in the same way.