Unable to load DVD

Try to load a DVD into the slot of the MacBook. Keeps having ejected

More details would be useful, as what is on the DVD and where it comes from?

Tags: Notebooks

Similar Questions

What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

Hello

These methods should help for Windows 7 or Vista.

References to Vista also apply to Windows 7.

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

-------------------------------------------------------------------------------------------------------------------------------------

For Windows 7:

How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.

You can run the command Admin account hidden from the prompt here if
necessary.

How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

-------------------------------------------------------------------------------------------------------------------------------------

For Vista:

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.

You can run the command Admin account hidden from the prompt here if
necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

What are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

How to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

-------------------------------------------------------------------------------------------------------------------------------------

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Unable to load the user profile?

I tried command prompt, changes in safe mode, go to the control panel and changed the .bak thing, but it did not always help! It is on my ADMIN account, and all about it is blocked. I can't download or update anything because the password does not work - I can't even sync the songs on my phone because of that! So everything around having to use approval of the Admin does not work. The changes that I have on safe mode did not hit anything! What should I do?

Hello

These methods should help for Windows 7 or Vista.

References to Vista also apply to Windows 7.

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).

Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.

Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215

Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

----------------------------------------------------------------------------------------------------------

For Windows 7:

How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

Use the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.

You can run the command Admin account hidden from the command prompt
from there if necessary.

How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

----------------------------------------------------------------------------------------------------------

For Vista:

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.

You can run the command Admin account hidden from the command prompt
from there if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

What are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

How to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

---------------------------------------------------------------------------------------------------------

If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Error "the user profile Service has no logon. Unable to load the user profile.

Original title: admin user account

the user profile service service is a not the logon user profile cannot be loaded, this is the error I received - it's my account Admin what should I do to correct this. I have come back before this happened. Help, please

Hello

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).

Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.

Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Unable to load my iPhone 6 more?

Unable to load my iphone 6 more?

What happens when you connect it to a well known power USB adapter and a good cable lightning known?

Error message: unable to load your Firefox profile. It may be missing or inaccessible

I know that others have had this problem but none of the validated answers turned out to be viable. When I try to start Firefox, the browser does not open and I see the following message appears: "unable to load your Firefox profile. It may be missing or inaccessible. "I am running Windows 8.1.

It's what happened leading up to this problem. I was passing through normally when I received a pop up message that says a threat has been detected, and Mozilla had a security patch that I have to download. This is the expedition of phishing malware believer, I closed the browser and restart the computer without having to download anything. When I restarted the computer, everything was normal and I googled for information on what had just happened, to see if I really needed a security patch. A forum suggested that I already have a virus/malware that caused the popup, and that I should deal with the possibility that updating Firefox. Then I refreshed Firefox, which seemed harmless enough. The update took the time, so I finally closed the window to refresh. Maybe I should let the window update but it was taken way too long - after that it's my problem to start with the error message.

Since then, I've uninstalled and reinstalled Firefox. I also deleted the profile folder in the hope that it would force the creation of a new folder. Nothing has worked. Someone has suggestions for Firefox run again?

Thank you!

Hi jbspear, please press the windows key + r and open: %APPDATA%\protector.exe

There you should find a folder named "Mozilla". try to rename it to something like "Mozilla.bak" (or delete it if you don't like your old firefox bookmarks, passwords and customizations) and then try to restart firefox...

STILL UNABLE TO LOAD WEBSITES IN FF, WELL THAT NO PROBLEM WITH IE OR AOL. I THINK I TRIED EVERYTHING SUGGESTED.

The Mozilla FF page loads, but no site that is open in FF. I checked the Proxy box, I disabled my Windows Firewall. There is a firewall for my Norton, but which has been there since day 1. One day, I do all my things FF without problem; the next morning I turn the computer on & nothing in FF will work. That is to say works well. AOL works fine if my internet connection is not the problem. This is the message that I get any site I try to open (I also copied the text of troubleshooting below this): thanks for any help - it's really driving me crazy!

Unable to connect
Firefox can't establish a connection to the server www.aol.com.
```
   The site could be temporarily unavailable or too busy. Try again in a few moments.
   If you are unable to load any pages, check your computer's network connection.
   If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
```
Troubleshooting 'copy text to the Clipboard.
The application databases

Name: Firefox
Version: 33.0.2
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:33.0) Gecko/20100101 Firefox/33.0
Windows multiprocessing: 0/1

Reports of incidents for the last 3 days

All Crash reports

Extensions

Name: AVG toolbar backup
Version: 17.1.3.3
Enabled: false
ID: avg@toolbar

Name: InfoAtoms
Version: 1.5.0.0
Enabled: false
ID: [email protected]

Name: Norton Toolbar
Version: 2014.7.8.23
Enabled: false
ID: {2D3F3651-74B9-4795-BDEC-6DA2F431CB62}

Name: PasswordBox
Version: 1.20.0.2308
Enabled: false
ID: [email protected]

Name: RealDownloader
Version: 1.3.3
Enabled: false
ID: {DF153AFF-6948-45d7-AC98-4FC4AF8A08E2}

Name: Skype Click-to-Call
Version: 6.13.0.13771
Enabled: false
ID: {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}

Graphics

Description of the adapter: Intel G41 Express Chipset
Drivers: igdumd64 igd10umd64 igdumdx32 igd10umd32
RAM card: unknown
Device ID: 0x2e32
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver date: 11/02/2011
Driver version: 8.15.10.2302
GPU #2 Active: false
GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0 x 8086
WebGL Renderer: Google Inc. - ANGLE (Intel G41 Express Chipset Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: Cairo
AzureSkiaAccelerated: 0

Important change preferences

Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.Disk.smart_size.use_old_max: false
Browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141027150301
Browser.Startup.homepage_override.buildid: 20141027150301
Browser.Startup.homepage_override.mstone: 33.0.2
extensions.lastAppVersion: 33.0.2
GFX. Direct3D.last_used_feature_level_idx: 1
network.cookie.prefsMigrated: true
places. History.expiration.transient_current_max_pages: 103947
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true

Important preferences locked

JavaScript

Incremental GC: true

Accessibility

Enabled: false
Prevent accessibility: 0

Versions of the library

NSPR
The expected minimum version: 4.10.7
Version: 4.10.7

NSS
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECC

NSSSMIME
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECC

NSSSSL
The expected minimum version: 3.17.1 Basic ECC
Version: 3.17.1 Basic ECC

NSSUTIL
The expected minimum version: 3.17.1
Version: 3.17.1

Experimental features

An update: as mysteriously as it started last Friday, it fixed itself today (apparently). I left my computer when I'm out in early afternoon after having tried again to open up all sorts of websites in FF with no luck. When I came back from my races it was back to normal - able to open all Web sites again. Obviously, firefox Elves snuck into my house while I was out and fixed what it was. I would like to know what!

I get an error "unable to load XPCOM. I know that I can reinstall Firefox but how to save my favorites?

I get an error "unable to load XPCOM. I know that I can reinstall Firefox, but when I went to do that he erased all my favorites that I did a system restore. How to backup my bookmarks?

Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.
- Download the full Firefox installation program and save the file to the desktop
  https://www.Mozilla.org/en-us/Firefox/all/
If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.
- Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
- (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

If you keep problems also create a new profile.
- http://KB.mozillazine.org/Profile_folder_-_Firefox
- http://KB.mozillazine.org/Profile_backup
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I can't read my emails or spam, to try to send it, I get the error message 'Unable to load the rich text editor', enamel works with Google, ok, how can I solve this problem in Firefox?

Error message for Virgin Gmail

"Unable to load the rich text editor.

What is the solution?

You can see https://support.mozilla.com/questions/896294
and look at this thread, the only real connection so far is it is very recent and it involves blank e-mail.

Those who are in this thread say blank incoming emails doesn't work except if they Disable Adblock Plus from the icon of ADP.

In fact, the rich text editor would be in a separate file, there is most likely a connection to ADP because some of these files may be blocked. I used to have a lot of problem in this forum on the web and the tools were blocked (didn't really need them) just because I block a lot of things here: like animals to fur in nurse uniforms, a trash can (toolkit) and that blue area at the bottom of this page that interferes with scrolling and the use of the key 'end '.

Something seems to be wrong with your profile, clicking on it does not bring it upwards.

Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

See this support article - difficulty of problems connecting to websites after Firefox update

Unable to play DVDs on my Toshiba laptop

I can't play DVDs on my Toshiba laptop.

It started a few months there with DVD freeze. Now, I am unable to read DVDs at all.

Tried a few internet solutions. Have also made approximtale six weeks ago and next to the factory. Have installed all Windows updates. Unable to read the DVD. Incidentally can still play CDs.

Any idea what is the problem and a solution please.

Thank you very much.

Hello

Can you please tell us what operating system you are using and what model of laptop.

In any case, if your optical disc drive can read CD but not DVD, it is possible that the driver is defective or the lens is dirty.
The first time, please clean the lens.

If this will not help it is possible that ODD has problem with the calibration of the lens.

Tecra M2: unable to read DVD or use WinDVD 4

Recently, I replaced my Tecra M2(: MODEL NO PTM20E-0MTGR-EN, SERIAL # 54579007G) hard drive and reinstalled windows xp.

I did most of my files on an external drive, but I don't have the original installation discs. I am now unable to read DVD or use Win DVD 4 (which came with the machine.

Is there a file I can download to reinstall dvd playback or otherwise what method can I use to wind dvd port 4 from the external hard drive (there the dll and .exe file but no installation file)

Thanks for your help

If you have written about WinDVD player bundled with the laptop, in this case, the situation is as follows: WinDVD player is part of the installation image and may not be downloaded from the Toshiba download page.

If you want to use the same application, you need to download a free version of the download from producer page or buy it as all other applications. When you buy the computer Toshiba laptop to ensure that each customer can view DVDs and install WinDVD player. If you use original recovery image, you can use it every time but if you want to use your own OS, in this case you are solely responsible for the installation of the OS and software to use.

If you have preinstalled with success the OS I recommend using any DVD player application. Intervideo WinDVD, one do not.

Good bye

Satellite L500-19 x crashes when loading dvd software

Satellite L500-19 x crashes when loading dvd software. It's photoshop elements 9. Other software by load generally okay, but not always.

Any ideas?

Hi shownomercer,

Have you tried the Photoshop disc in another computer to check if the installation disc is ok or not?

What exactly happens when the computer crashes? Blue screen?

Satellite 1800-354 is unable to load the driver when it is turned off during the night

Hi could sombodu help me to solve this problem.

My laptop wives is unable to load the driver when its been delivered overnight. It's normal runs when the drivers installed and when it was turned off for about a half hour.
The laptop has windows xp sp2, the card is a belkin f5d7010 802.11 g and I downloaded the latest drivers for it. Thank you louis.

Hello

This driver is the problem for the PCMCIA port or wireless network card?

Good bye

MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

I get an error when debugging to

Public void RegisterGPIBGlobals()

in the Vbib - 32.vb, the error msg says:

Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

C:\Windows\System32, the msg of error becomes:

An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

2 Will the application I am writing with .NET work in x 64 Windows 7?

The Almighty gurus and Mods please help. Thank you!

Hi Joel, thanks for the answer! I have the 3.0.2 driver.

I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

«To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

Unable to load DVD

Similar Questions

Maybe you are looking for