Unable to locate "AVI compressor Comparison.vi.

Similar Questions

• TPSMain.exe - Unable to locate component

  Whenever I start my computer, the following error message appears TPSMain.exe - Unable to locate component-
  This application has failed to start because TPwrReg.dll is not found. Re-installing the application may fix this problem.

  Nobody knows what it means and what I can do about it.
  Help, please

  Hello

  tpsmain.exe is a process associated with Toshiba laptops. He manages the power save function to ensure that the system goes to a power saving mode when it is not used.
  I would recommend to eliminate energy saver completely from the BONE by using Add and remove the option programs in the control panel. Then try again to install this Toshiba utility again. You can use this software to the tools & utility Cd or you will check the download page to Toshiba for latest updates

• deployment error: unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.

  Hello world

  I want to deploy my project Teststand and got a strange error when creating the image.

  For many additional files with the suffix as .tso, alias, lvlpb, exe, dll... deployment tool launches the error message "unable to locate all the subVIs screws saved because a Subvi is missing or the VI is not registered in the last version of LabVIEW.» (see also the attached picture).

  If I exclude the files of my distribution or set them to "include without treatment or dependencies of elements of" the generation works fine.

  After the error, I checked the Temp folder. The temporary project LV is not yet created.

  I used the deplyoment-installation in the same way within a fromer project and had no problems like that...

  I use Win7 / LV2013 SP1 & Teststand 2013 f1 (5.1.240).

  Could someone help or support? Thank you!

  Finally, I tried the construction with LV2015 & TS2014 - no problems... Everything works fine...

• Unable to locate labview run time engine

  Hi all

  I have a problem while trying to run a simple labview software on a Tablet PC.

  My development machine is under win 7 64 bit with labview 2010 sp1 10.0.1

  My computer is a win 7 32 bit based tablet.

  I installed labview runtime engine TEN 2011 standard 32-bit sp1 but I get the following text: «unable to locate labview run-time engine...» "

  I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

  Should which version of the Runtime I install!

  You did not say, but I'm assuming that you are using LabVIEW 2010 sp1 32 bit to develop and build the application.

  You can include the 2010 sp1 Runtime when you build the Setup program, or you can download it (here) and install it separately.

  (The runtime version must match the development system, so time to run from 2011 will not work. Even the 2010 (non - SP1) could cause problems)

  Kobi Kalif wrote:

  I tried to install sp1 64-bit of the 2011 standard RTE because one of the items suggested, but windows is not allowing to install 64-bit applications...

  Can you tell me what position suggested to install an operating time of the wrong version of 64-bit. That makes no sense at all! Please provide a link.

  (You can only install the runtime on a 64 bit OS, 64-bit, and he will agree only if the application has been developed in 64-bit LabVIEW to the same version.)

• Microsoft Wireless Keyboard 3000 v2.0. -I'm unable to locate any key refresh

  I just installed a Microsoft Wireless Keyboard 3000 v2.0.Sadly I am unable to locate any key refresh and the key icon shown on 'aid' does not exist.

  Any input would be welcome, thank you.

  Hi RowlandsCastle,

  You can see the following link for the complete documentation of the product. Select the product from the options offered.

  Microsoft Hardware - Documentation

  You can also contact the hardware phone support for assistance.

  Contact us - Microsoft

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• Viva Piñata was unable to locate the DVD - ROM drive

  Hello!

  I installed the game Viva Pinata on Windows XP Pro in English when I try turn on the game there is a message like: unable to locate the DVD - ROM drive.

  On the other computer (Windows 7) it works very well!

  What does not help?

  -Instalation of safedisc.exe.

  Help me please!

  Hi MarcinKowal,

  ·         Did you do changes on the computer before the show?

  ·         The installation of the game Viva Piñata was successful?

  You can read the following article and check if the problem still persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Let us know if that helps.

• netsh.exe - Unable to locate componet

  netsh.exe - Unable to locate component.  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.

  The netsh.exe is a file in Windows XP pro that is involved in the functionality of the command prompt. Here are some articles that might help you to learn about this:

  Using Netsh
  How to use the Netsh command line tool
  And along the lines of resolution of this error, follow this link here, this fix is posted on another missing file but replaces the Netsh file while setting then it should help.

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I've recently upgraded to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels).

  I've recently updated to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels)

  original title: the printer toolbar

  Download the right driver Windows 7 from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3192753

• at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  Have you Spy Sweeper and uninstalled the software. It seems that other software can also use this driver.

  You can delete the entry start and the error using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  I have a problem with my laptop which comes to hang. Bluie screen.
  the screen show:
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

  Please this drive crazy me I need your help

  You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/885523

  S.Sengupta Media Center MVP

• STOP: c0000135 {Unable to locate component} __This application has failed to start. Reinstalling the application may fix this problem

  Hello

  We use Windows XP Professional. A user reported that machine has been suspended. Then it restarted the machine. It stops after WINDOWS LOGO & before the login screen.

  I received STOP: error c0000135 {Unable to locate component}. I copied the file kernel32.dll in recvery console mode. There is no work.

  Also repaired OS by using the Windows XP CD did not work.

  Kind regards
  Carter S

  Hello Thomas,.

  Thank you for visiting the Microsoft answers community.

  Take a look at this KB article.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.