Unable to present a review of the cases of suspension on an Xbox
I can't send a review of the cases of suspension on the harassing messages even if I know for a fact that I was not guilty, since I have the cat food and I have pictures of the messages themselves as evidence. I was harassed during a fight on xbox alone a dead or alive 5 last lap he called a spammer and kept sending rude messages and responses only I did were k and? It's just a game get top. I play for fun, he responded with pls and said so go the qqueen drama you don't fight again bye Felicia and you are reported while I was being liabilities I became suspended rather even if I reported than him and yet he did not get suspended at all. So basically I want to prove I am innocent, but I do not have the chance a way to fix it?
Hello
Your Question is beyond the scope of this community...
I suggest that repost you in the Xbox Forums.
"Xbox a Preview program FAQ.
http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ
'Home'
"Xbox forums.
http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx
_________________________________________________
"Xbox Forums directory.
http://www.Xbox.com/en-us/forums
General
Material & Discussion Services
Xbox support
Agent hours: M - F 09:00-17:00 PT
Law enforcement forums
Technical support of Xbox Live rewards
Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST
See you soon.
Tags: Windows
Similar Questions
-
Unable to present a work when the variable is a composite
Hello
I tried to present a work of dbms_job.submit
DBMS_JOB. SUBMIT (l_job,
' gitm_goaml_job_proc ('|) '''|| p_wrk_gidamlrp | " ' ||'),
SYSDATE,
"SYSDATE + (10 /(24*60*60))');
P_wrk_gidamlrp here is a composite type of variable I created in a package specification.
When I try to complie the code I get an error that ' | have not been used properly ", but if I replace p_wrk_gidamlrp with a variable of type of data simple things work very well."
Can you please let me know the reason for this error?
Thank you
-vinod
Published by: 965358 on October 15, 2012 04:07965358 wrote:
HelloI tried to present a work of dbms_job.submit
DBMS_JOB. SUBMIT (l_job,
' gitm_goaml_job_proc ('|) '''|| p_wrk_gidamlrp | " ' ||'),
SYSDATE,
"SYSDATE + (10 /(24*60*60))');P_wrk_gidamlrp here is a composite type of variable I created in a package specification.
When I try to complie the code I get an error that ' | have not been used properly ", but if I replace p_wrk_gidamlrp with a variable of type of data simple things work very well."
Can you please let me know the reason for this error?
Thank you
-vinodIf p_wrk_gidamlrp is a composite type of variable, then you can simply concatenate it to a string. Concatenation expected varchar2 values or data types that can be implicitly converted to a varchar2 (although the implicit conversion is not recommended). Oracle cannot implicitly convert a composite type in a string of varchar2.
-
Not the case in the present site gives a phone number to explain my contract, I can move from one computer to another?
How can I set up for printing to Adobe
So far, it is not necessary for a person no-tech.
If you have a normal single-user license or subscription, you are allowed to have two active facilities as long as you use only one of them for the software at the same time. You can disable and re-enable them if necessary to install on another machine.
-
Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and annotation. Please let me know if this is the case, or if there is a solution
'' If '' they use the free software Adobe Reader and "If" there is no security prevent this, he should be able to add comments.
It'll be hard to say what's wrong without more details such as what exact version of the reader they use, they open the pdf file in a browser or in the player itself and what exactly happens when they try to add comments.
-
By the way the presentation Variable in the Case of the ReportColumn statement
Hi all
I have I need to pass the presentation column that contains the date value in the column of the report which is to be set to zero in this requirement.
That is to say the case statement is like that
where column1 is null then 'variable presentation"is the value of the column.
someone you will suggest how to pass the variable to the presentation to the column of the report.
Thank you
Yogi.Check the data type of the column 'time '. ' ' count of the parent.
the properties of column ROM-> data format
I guess his type of tank, if yes, then
cases where "Time". "" parent effective ' is null then ' @{parent_effective_from}' another 'Time '. "" end of parent from to.If the date is set then the default
cases where "Time". "" parent effective ' is null then @{parent_effective_from} {default} else 'Time '. "" end of parent from to.or else try as below
Date ' @{parent_effective_from} {2010-01-21}'Published by: Srini VIEREN on 12 April 2013 13:24
Try other options as stated above
Published by: Srini VIEREN on 12 April 2013 13:27
Published by: Srini VIEREN on 12 April 2013 13:33
-
Works at a newspaper, finds it difficult to make a presentation made in Indesign and must be transformed into an app for Ipad / IOs.
This is the case in DPS consgigo generate the .ipa file put nsao install on the device, the message 'installation' all the time.
If I get the zip file and the XML of the person who generated the folios, as indicating that the DPS?
Recognizing
This happens when you try to install .ipa to a device that is not listed in the mobileprovision file. Make sure that the UDID of the device is included in your Developer Portal iTunes and when you generate the new file mobileprovision that you explicitly check the box next to the new feature that you added.
Then download the new mobileprovision file and make sure that you use a new one, not the old, to get the app to the App Builder.
Neil
-
Unable to shut down the servers in the case of the SSL configuration only
A strange situation that i'v got stuck.
After changing the configuration of SSL only, it was possible to start Admin and (soa, IOM) managed servers using scripts but no chance of them to stop.
Any necessary changes in the scripts relevant when it is (t3s, https, ssl port specified for the Management Server).
Note:
I use a custom identity and trust keystore.
The problem is in stopWeblogic.sh.
Initially the server is stopped using the wls appellant
${JAVA_HOME} / bin/java - classpath ${FMWCONFIG_CLASSPATH} ${MEM_ARGS} ${JVM_D64} ${JAVA_OPTIONS} weblogic. WLST shutdown.py 2 > & 1
But this call was an error:
< 8 August 2014 10:39:03 FET > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = GeoTrust Primary Certification Authority - G3, OR = (c) 2008 GeoTrust Inc. - only for authorized usage, O = GeoTrust Inc., C = US'. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. >
This Exception occurred at Fri Aug 08 10:39:03 FET 2014.
javax.naming.CommunicationException [root exception is java.net.ConnectException: t3s: / / < host FQ name >: 7002: Destination unreachable; nested exception is:]
javax.net.ssl.SSLKeyException: FATAL Alert: BAD_CERTIFICATE - damaged or unusable certificate has been received. ; No available at destination router]
Problem call WLST - Traceback (innermost last):
File "/ u01/app/oracle/Middleware/user_projects/domains/demo_iam/shutdown.py", line 3, in it?
File '< iostream >", line 22, in connect
File '< iostream >", line 648, in raiseWLSTException
WLSTException: Error occurred when executing connect: error getting the initial context. There is no server running to t3s: / / < host FQ name >: 7002
DumpStack() to view the full stacktrace
Fact
At the same time, I can handle servers with wlst.sh. So it seems that my certificate is not used in the case of stopWeblogic.sh
This change
#${JAVA_HOME} / bin/java - classpath ${FMWCONFIG_CLASSPATH} ${MEM_ARGS} ${JVM_D64} ${JAVA_OPTIONS} weblogic. WLST shutdown.py 2 > & 1
$OIM_HOME/common/bin/wlst.sh shutdown.py 2 > & 1
solved the problem.
Just to mark in a solution.
-
Why word of packaging which is enabled by default is not the case here?
Hello
In my accordion, I don't want to give line breaks but I want the text word wrap automartically but this isn't the case. On the first tab, I have provided the line break, so all is well but the rest of the tabs have truncated text.
Why?
Thank you
<? XML version = "1.0" encoding = "utf-8"? >
"" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "vertical".
backgroundGradientColors = "[#000000, 660707 #]".
verticalScrollPolicy = "off" backgroundGradientAlphas = "[1.0, 1.0]" >
< mx:Style >
VBOX {}
borderColor: #000000;
borderStyle: beginning;
borderThisckness: 2;
}
< / mx:Style >
< mx:Accordion id = 'myAccordion' width = "600" >
< mx:VBox id = "ms" label = "Microsoft" width = "100%" height = "500" horizontalScrollPolicy = "off" >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Image source = "assets/microsoft4SBTH.jpg" height = "80" width = "80" / > "
< / mx:HBox >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Text text = "Microsoft is the best in wondows. Yes, they are really good and get better each and {'\n'}every day.} They present Windows 7 and launcing reviews too. "/ >
< / mx:HBox >
< / mx:HBox >
< / mx:VBox >
< mx:VBox id = "cs" label = "Cisco" width = "100%" height = "500" horizontalScrollPolicy = "off" >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:HBox >
< mx:Image source = "assets/c.jpg" height = "80" width = "80" / > "
< / mx:HBox >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Text text = "Microsoft is the best in wondows. Yes they really good and make it better every day. They present Windows 7 and launcing reviews too. "/ >
< / mx:HBox >
< / mx:HBox >
< / mx:VBox >
< mx:VBox id = "st" label = "Symantec" width = "100%" height = "500" horizontalScrollPolicy = "off" >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:HBox >
< mx:Image source = "assets/Symantec.jpg" height = "80" width = "80" / > "
< / mx:HBox >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Text text = "Microsoft is the best in wondows. Yes they really good and make it better every day. {'\n'} They present Windows 7 and launcing reviews too. "/ >
< / mx:HBox >
< / mx:HBox >
< / mx:VBox >
< mx:VBox id = "vm" label = "VMWare" width = "100%" height = "500" horizontalScrollPolicy = "off" >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:HBox >
< mx:Image source = "assets/vmware4SBTH.jpg" height = "80" width = "80" / > "
< / mx:HBox >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Text text = "Microsoft is the best in wondows. Yes they really good and make it better every day. {'\n'} They present Windows 7 and launcing reviews too. "/ >
< / mx:HBox >
< / mx:HBox >
< / mx:VBox >
< mx:VBox id = "ct" label = "Citrix" width = "100%" height = "500" horizontalScrollPolicy = "off" >
< mx:HBox >
< mx:HBox >
< mx:Image source = "assets/Citrix_Logo.jpg" height = "80" width = "80" / > "
< / mx:HBox >
< mx:HBox horizontalScrollPolicy = "off" >
< mx:Text text = "Microsoft is the best in wondows. Yes they really good and make it better every day. {'\n'} They present Windows 7 and launcing reviews too. "/ >
< / mx:HBox >
< / mx:HBox >
< / mx:VBox >
< / mx:Accordion >
< / mx:Application >
It think you want it resize itself as much unless you set the width of the text and its parent containers there width wise that leads to no packaging. Setting the width but no height allows the text resizes vertically creating return to the line.
-
What is the Inbox that has appeared on my firefox? Is it related to firefox? If this is not the case, how can I get rid of him? This happened after I've upgraded to the latest version. Thank you
Hi, no this is not part of firefox. Please always make sure that you only have to download firefox from the official site at getfirefox.com. Please try these steps to get rid of this adware:
- Go to firefox > help > troubleshooting information > profile folder - "view folder", then a new window will open. in this search on a file named user.js window (it can be used to overwrite your custom settings). where it is present, delete or rename this file and then restart firefox. How to fix preferences that will not save
- then install the reset search addon - he'll come back more often customizations make these adware programs in default firefox: https://addons.mozilla.org/firefox/addon/searchreset/
- Finally, run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner to ensure that it is not adware in other places as well.
Remove a toolbar that has supported your Firefox or the homepage search
Fix Firefox problems caused by malicious software -
help my macbook pro retina 13inch started itself and turned off while in the case
as the title, my Macbook pro retina (bought in 2014) is transformed and then turn off 5 minutes later while in his case today, I only noticed after reviewing the event log and seeing a start and stop. How can this happen? the Mac was definitely off not asleep and I did not put a timer.
It is unusual for a Mac to act this way, but this is not the first time that I heard about what's going on.
It looks like a problem SMC and is easily fixed by a reset see here reset management system (SCM) controller on your Mac - Apple Support this will most likely solve the problem.
If this isn't the case, then it could be a simple sticky switch?
A visit to a Genius Bar is perhaps a good idea if the SMC reset does not work for you, and a new OSX installation did not help.
-
My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.
This general situation may be similar to what is mentioned in this sequel to thread of the CSA
and if the remedy is to use instructions; detailed and I hope they are correct...
Re: Restart fails after installation of El Capitan help!
Or you can try and see on the repair of the system and then if your disk utility can
See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to
the Mac system, to see if this solves the problem. There may be more than one cause.
You could try and boot into OS X Recovery, utilities out there, and other options are available.
• OS X: on OS X Recovery - Apple Support
This example uses a special partition on the hard drive of recovery which is not in the
same disc that the Mac OS X section; However if your hard drive is missing, these other
items may also be at risk. You must have and maintain backups of your duplicate content
on the external storage drives closed; In addition, a Time Machine backup helps to restore.
• Apple OS X and Time Machine tips:
http://pondini.org/OSX/home.html
• Tips for OS X - using HD recovery:
http://pondini.org/OSX/RecoveryHD.html
{Using the utility disc and other tools can be done from the boot OS X Recovery volume
Beware of the fact these tools can also delete or reformat your content; wiping.}
Don't know what to say; you could see visiting an Apple store with genius if
There is an official store. Usually for best time planning you would contact them for an appointment.
- Make an appointment at an Apple Retail Store Genius Bar
- Find an Apple authorized service provider
- https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)
Or if there is no official retail Apple Store with genius, the following suggestion would be to contact
a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.
In any case...
Good luck & happy computing!
-
Get the button to change automatically after the structure of the case is completed once.
Hi all
The purpose of this VI (which I lightened it for the purpose of the present) is to do nothing until the START button is true. Then the structure of the case, and the string will be sent to the MSH. I need this too such that the stop command can be sent at any time and will be sent when the STOP button is true.
At the present time, nothing happens until the BEGINNING is true, then the case structure begins and ends inside while loop. BUT then the outer while loop restarts again and the inside of a cheek through which returns once again the order of the string to the MSH (an unwanted process) because the START button is always true.
Is there a way to get the start button to return to a State of false once inside while the loop is over?
(Other solutions giving the same result would be very appreciated also!)
BBRO says:
The purpose of this VI (which I lightened it for the purpose of the present) is to do nothing until the START button is true.
Well, your code sends a command to stop immediately after starting the program while consuming all CPU running the inner loop in parallel as fast as the computer allows. (Since there is no dependence on the data, the inner loop and the stop code both run at the same time. LabVIEW does NOT run left to right!).
All you probably need is a simple while loop, a structure of the event with three cases and all the buttons in the action of locking.
See attached a simple change, LabVIEW 9.0.
(And please don't maximise front panel and diagram for full screen, especially if there isn't much here.) Sometimes we want to work on other things at the same time, for example to write this response!)
-
The Windows Installer
I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?Hello
-What you have done to try to solve the problem?
-Did you change on your computer due to which the question has begun?I recommend you follow the steps in this article and see if the problem still occurs.
How to solve the problems when you install or uninstall programs on a Windows computer.
-
How do I open the case of the HP Pavilion 110-200ED
Hello
Can someone explain to me how to open the case of a HP Pavilion 110-200ED.
So far, I can see the case isn't screwed on the frame, but is revitted to the chassis.
Kind regards
Jan
Hello
Review this video. You will need a Torx screwdriver as in this example.
-
NAC 4.8 adding to the case because of the cam
Hi all
I threw a half because of the NAC installation and this is my first deployment of the NAC, I feel a little overwhelmed.
I read the installation guide for the devices from the back to the front, but I have a problem after the addition of a case to the cam.
I am able to add the case to the cam successfully, but almost immediately, the case and the cam can no longer ping between them in the cli.
the States of event logs that the heap in connected to the cam, but newspapers then an error that the cam is unable to push the registration to the CAs. from this point, I get several questions of event log indicating that the case is out of sync
I copied a part of the nac_manager.log which show the connection process:
2012-03-09 22:33:06.037 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartServer - SSS - connect: get the new connectorClient of 10.0.0.100
2012-03-09 22:33:36.433 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart
2012-03-09 22:33:38.434 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart
2012-03-09 22:33:40.436 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: sleep for 2 seconds to click to restart
2012-03-09 22:33:42.438 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - SSM - addSecureSmartServer: click on the STOPPED state
2012-03-09 22:33:42.617 + 1100 WARN [TP-Processor24] com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.
2012-03-09 22:33:42.702 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...
2012-03-09 22:33:42.793 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.FilePublisher - FilePublisher - writing: setPath failed...
2012-03-09 22:33:42.833 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.SecureSmartPublisher - SSM publishAccess: impossible to publish the comments sign-up page
2012-03-09 22:33:42.872 + 1100 [TP-Processor24] com.perfigo.wlan.jmx.admin.FileUtil - FileUtil - readFile INFO: /perfigo/control/conf/os-detection.fp
2012-03-09 22:33:42.887 + 1100 [TP-Processor24] ERROR com.perfigo.wlan.web.admin.AccessConf - cannot activate ETH1 on 10.0.0.100
2012-03-09 22:33:42.888 + 1100 [TP-Processor24] ERROR c.perfigo.wlan.web.admin.AdminIpAccessInfoManager - AIAIM - publishAccess: failure
2012-03-09 22:33:42.888 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.ServerConf - SC - stopOobSWissServer()
2012-03-09 22:33:42.905 + 1100 [TP-Processor24] INFO com.perfigo.wlan.web.admin.SecureSmartManager - 10.0.0.100 added to Clean Access Manager
2012-03-09 22:33:46.922 + 1100 [pool-1-thread-1] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:
java.net.SocketTimeoutException: connect timed out
2012-03-09 22:33:46.922 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-thread-1] ERROR: could not connect to 10.0.0.100
2012-03-09 22:34:01.614 + 1100 [pool-1-wire-2] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:
java.net.SocketTimeoutException: connect timed out
2012-03-09 22:34:01.615 + com.perfigo.wlan.web.admin.SecureSmartPublisher - SSP - connectAndPublish 1100 [pool-1-wire-2] ERROR: could not connect to 10.0.0.100
2012 03-09 22:34:01.627 + 1100 [pool-1-wire-2] WARN com.perfigo.wlan.web.admin.SecureSmartPublisher - NAC Server 10.0.0.100 is out-of-sync.
2012-03-09 22:34:05.628 + 1100 [TP-Processor19] com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication ERROR: could not connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:
java.net.SocketTimeoutException: connect timed out
2012-03-09 22:34:20.618 + 1100 [pool-1-wire-3] ERROR com.perfigo.wlan.web.admin.ConnectorClient - Exception of Communication: can't connect with the exception of server access own creation connection to: 10.0.0.100. nested exception is:
java.net.SocketTimeoutException: connect timed out
I've followed all of the installation guides recommendation of the disconnection of the interface untrust on the CASE and there is no HA configuration currently...
What I don't understand is the inability of webcams and cases of ping each other, but they can ping other devices on the network. The SCA and the cam are in different VLANS.
Any assistant to a guru of the NAC would be greatly appreciated.
Thank you
JS
Thanks a lot Man, saved you my day
Maybe you are looking for
-
Re: Cannot create flash drives recovery media
I recently bought a new Toshiba NB305-N440BL and updated netboo to upgrade to Windows 7 Home Edition Premium. The Wizard "Create the recovery media", as suggested, I tried to create the recovery on two flash drives media. Flash memory were new and ha
-
I have a desktop HP P6 running Windows 7 64 bit and I would like to install some XP programs. Found that "hardware virtualization is disabled' on my computer have as much as find vds.exe. How to activate it. Please, I beg you. Can anyone help?
-
installation of the HP scanning software
Hello I have a Photosmart 5515 (a 5510 duplex I think!). I have run windows 8. Install the driver and I can use the printer as the printer - connected by USB cable. I can even scan a document in WORD using ALT I P S. But I can't get the system to
-
I get the message that Lenmark X 422 is not installed properly
Dungeon IK's message that Lenmark X 422 is not installed correctly, I have not done anything to cause this. IM told the unstall driver and reinstall. If I uninstall where can I get a new one and it costs.
-
Signature of the problem:Problem event name: BEXApplication name: Acrobat.exeApplication version: 9.0.0.332Application timestamp: 4850eb76Fault Module name: ADMPlugin.apl_unloadedFault Module Version: 0.0.0.0Fault Module Timestamp: 4850c 078Exception