Unable to read the audio stream: no audio hardware is available, or the hardware is not responding.

Similar Questions

• Unable to read the security descriptors data stream

  Whenever I start my computer runs CHKDSK - it says checking file system on E: and then he said that it should be checked for consistency. It works until stage 3 when he says 'impossible to read the security descriptors data stream' how to fix this?

  I tried chkdsk e:/r and it runs before step 3 when I get the "unable to read the security descriptors data stream" and it goes no further.

  I also tried fsutil dirty query e:- but it says something about a parameter incorrect and not if the volume is dirty or clean.

  Then I tried chkdsk e:/f/x - that always gives me the same mistake about it being an incorrect setting.

  As far as I know there is absolutely nothing on E:, I didn't even know that there was an additional drive. Right now I have it turned off so that I can use my computer. It seems to work fine without it. I read an article that said that if I can't fix e: with chkdsk which I have to do a low-level format of the reader? What's my next step? And I can do without the XP disc?

  The syntax

  fsutil dirty query e:

  is correct (except, of course, you try to use from the Recovery Console, where the fsutil command is not available).  Are you logged on as a user with administrative rights when you use fsutil?

  Similarly, the switches /f and/x are not available for chkdsk in the Recovery Console.

  See Recovery Console controls.

  Click on desktop then right-click on E: drive icon and select Properties.  What is indicated for:

  • File system
  • Space used
  • Free space
  • Capacity

  Now double click the icon for E: are shown files?  If not, click Tools > Folder Options > view and select the radio button "Show hidden files and folders" and uncheck "Hide protected files (recommended) operating system.  Now that you see all the files?

  Everything you read 'low level of shaped' is nonsense.  Any modern PC drive cannot be low level formatted by end users.  You can read this, but there is really no necessary even to "zero fill" your drive E: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=203931 (I have not checked to see if the WD tools rescuer has similar characteristics to SeaTools for DOS).

  If you are convinced that there is nothing of value on E (for example, installation of backup or restore), you can either format by right-clicking on the drive icon in my computer and selecting "format" or you can start disk management as described previously and use either in electronic format or delete the partition completely.  If you delete the partition, space becomes "unallocated".

  Because I guess C is your system drive (where Windows is), you may be able to use the diskpart tool to extend the partition F to use the unallocated space left if you decide to remove E well it's much easier (and safer) to do with disk management third-party tools such as Easeus Partition Manager free : http://www.partition-tool.com/personal.htm

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• After you download CyberLink PowerDVD 12, am unable to read the comics

  Since the download, CyberlinkPower DVD 12, am unable to read the comics if it starts with a trailer or advertising.  When it comes to the "Play" button, nothing happens.  Someone, please help that Cyberlink will not say as to what is happening.  Thank you.

  Hello

  As much as we want to help you with this, I fear that this issue is not part of our scope of support. I recommend you contact CyberLink support, as they are one who takes over this issue properly and in the best position to address this problem.

  Thank you for your understanding in this matter.

  Thank you!

• The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?

  The gatherer is unable to read the registry 0 error code 800700002 x. What does that mean?  Slow performance are now a big problem.  Natural remedies do not work

  Hello

  I suggest you perform a clean boot in order to check whether a third-party program is causing the problem.

  See this article for more information on the clean boot:

  
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353  

• Unable to read the work recorded, timeline is black and shortcuts

  Unable to read the work recorded.

  I started doing a few words with a song. It was not full yet so I recorded it. After a while, I returned to continue, but the timeline would not play. The video section containing the words of the timeline was black and shortened. I waited until the next day and it still the same. I tried to re-do and its not black or shortened, but the timeline would not play with or without music. Please I need help with this!

  Hello

  1. what application you're using to play the video?

  2. you receive an error message when you try to play the video?

  You can try to recreate and save the film.

  Reference:

  Demo: Create a slide show with music in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  Create movie customized for Windows Movie Maker settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-Maker

  To save a movie in Windows Movie Maker, click the link below.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• Unable to read the blue-ray

  I am unable to read the blue ray on my laptop, it says that I need a program to play, where can I find a software to be able to play blue-ray?

  You need a blu ray disk drive and the program to play with. Google for something, or go to your favorite computer store.

• Lightroom is unable to read the files of my DSLR Nikon d5500 has been added

  Lightroom is unable to read the files my DSLR Nikon d5500 has been added, but no difficulty to read of my Nikon 3100 DSLR that I do?

  Thanks for the info Jim. I found that I could use a DNG Converter and have now managed to access my files so I'm sorting. Thank you

• Impossible to import files: error "unable to read the files.

  All of a sudden I can no longer import files.  I get a message "Unable to read file" whenever I try to import, disc or iPhone.  It is not a problem of memory; I have a lot of memory on my hard drive.  Does anyone have an idea how to solve this problem?  Should I reinstall LR?  If so, how do I?  Thank you!

  It is almost always a problem of permission to write (despite the ambiguous message).  LR ' t for some write reason the files to the selected location.

  We need to learn a little more about your system... OS to start.

  I highly recommend reinstall Lightroom until everything has been eliminated.

• installation: my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  my version of elements adobe 12 is unable to read the raw files from my canon 70 d SLR.

  You need Camera Raw 8.2 or higher.

  12 items delivered with 8.1.

  Click Help > updates to update Camera Raw

• Unable to read the list of values of FRM-40502

  Hi all
  
  Unable to read the list of values of FRM-40502
  
  get this error when I try to fill the list of values for some employees
  
  Here's the LOV query
  

  Select dsm_code,dsm_desc,dsm_content from deschange_master
  where dsm_orgn=:parameter.p_orgn
  and (dsm_ctry =:parameter.p_ctry or :parameter.p_ctry is null)
  and(dsm_loc =:parameter.p_loc or :parameter.p_loc is null)
  and( dsm_oru =:parameter.p_oru or :parameter.p_oru is null)
  and
  ((DSM_CODE  like '%PWI%' and DSM_CODE like '%INCR%')
  and (select count(eih_emp_code)from employee_increment_header
  where eih_emp_code =:edcd_emp_code and
  to_date(eih_eff_date,'DD-MON-RR') = to_date(:desig_date,'DD-MON-RR'))=1)
  or
  ((DSM_CODE not like '%PWI%' and DSM_CODE not like '%INCR%')
  and (select count(eih_emp_code)from employee_increment_header
  where eih_emp_code = :edcd_emp_code and
  to_date(eih_eff_date,'DD-MON-RR') = to_date(:desig_date,'DD-MON-RR'))<>1)
  order by dsm_code

  Hello
  Try

  Select dsm_code,dsm_desc,dsm_content from deschange_master
  where dsm_orgn=:parameter.p_orgn
  and (dsm_ctry =:parameter.p_ctry or :parameter.p_ctry is null)
  and(dsm_loc =:parameter.p_loc or :parameter.p_loc is null)
  and( dsm_oru =:parameter.p_oru or :parameter.p_oru is null)
  and
  (((DSM_CODE  like '%PWI%' or DSM_CODE  like '%INCR%')
  and (select count(eih_emp_code)from employee_increment_header
  where eih_emp_code = :EDCD_EMP_CODE and
  eih_eff_date = to_date(:DESIG_DATE))=1)
  or
  ((DSM_CODE not like '%PWI%' and DSM_CODE not like '%INCR%')
  and (select count(eih_emp_code)from employee_increment_header
  where eih_emp_code = :EDCD_EMP_CODE and
  eih_eff_date = to_date(:DESIG_DATE))!=1))
  

  Thank you

• I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I enable to save the mp3 files on my computer?

  I am trying to record an mp3 file, but firefox does not allow me to save... it allows me to read the file but not download and asave to my computer. How can I activate the Firefox save MP3s on my computer?

  Go to Options > Applications tab > MPEG Layer 3 audio(audio/mpeg) image search > use the "Save file" option on the menu drop down.

• I can't open windows dev, required audio hardware is not detected

  My computer says: "Windows movie maker cannot be used because the required audio hardware is not detected on your computer".

  The audio material is on my computer. I downloaded the audio to youtube, I have changed it to an AVI file with www.zamzar.com

  Can someone help me please?

  It is already very clear. The audio from your computer does not meet the minimum requirements of Windows Movie Maker.

  Hardware audio here refers to the audio device (common examples are Realtek and Conexant High Definition Audio) in your computer and not the audio file you want to add to the film.

  Audio drivers may be damaged or have problems.

  Please tell the following details on your PC-

  * Manufacturer/OEM (HP, Dell, Sony, Acer, MSI, etc..)

  * The series and model

  The information could be useful to find the updated drivers for your audio device.

  Also, press the Windows key + R, type devmgmt.msc and press ENTER. Expand sound, video and game controllers, and then check that your audio device is there. Also, double-click on your audio device, click the general. The State of the device should be "this device works correctly. If it displays errors or problems please post a description of the State of the device with the error code here.

  Also, try to download and install Windows Movie Maker Version 2.6.

• During the restart of Vcenter Server - error 1053: the Service has not respond to the start or control

  Hi all

  I couldn't use the vSphere Client to enter in vCenter (from my office).

  I could not Remote Desktop on the server vCenter resides on.

  I could go on the console of the server vCenter resides on.     I couldn't use vSphere Client from there either.

  I tried rebooting vCenter and got this error message:

  Unable to stop the VMware VirtualCenter Server Service on Local computer.

  Error 1053: The service did not respond initially or control in a timely manner.

  Any ideas where to look for more clues or ideas on what might be the case?

  Thank you.

  I could not Remote Desktop on the server vCenter resides on.

  This is not vcenter Server.

  Check the configuration of Windows.

  Have you tried restarting your vCenter Server system?

  André

• When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  When I click on the 'Get' button in the app store for El Capitan, the beachball cursor rises and crashes the app store (not responding) in the force quit window...

  How can I fix it?

  Nevermind, I restarted the computer and it was fixed