Unable to resolve the error of convergence

Similar Questions

• Microsoft Assistant unable to resolve the error code library; Ox8007000b

  I talked to your Elroy B staff who took my PC remotely. It has rebooted my laptop but never came back. Unfortunately, he could not solve the problem. I'm unable to open the Photo Gallery and get the error code: OX8007000b want to go back to Elroy B to continue the repair as windows still under warranty. Soon Tom

  A lot of customers that has this problem. Did the free repair Essentials and fix it but no luck. Have tried command prompt and your Elroy tried B Command Promt-dism in line/cleanup-image version: 6.2.9200.16384

  I'm on Windows 8 Windows 7 using Samsung Notebook NP355V5CA03K update

  Please notify.

  Concerning

  Tom

  I talked to your Elroy B staff who took my PC remotely. It has rebooted my laptop but never came back. Unfortunately, he could not solve the problem. I'm unable to open the Photo Gallery and get the error code: OX8007000b want to go back to Elroy B to continue the repair as windows still under warranty. Soon Tom

  A lot of customers that has this problem. Did the free repair Essentials and fix it but no luck. Have tried command prompt and your Elroy tried B Command Promt-dism in line/cleanup-image version: 6.2.9200.16384

  I'm on Windows 8 Windows 7 using Samsung Notebook NP355V5CA03K update

  Please notify.

  Concerning

  Tom

  ========================================
  When you say 'your staff' I assume you mean Microsoft.

  To-peer forum consists mainly with volunteers.
  If you would like to contact Ms support staff... I have
  Guess it would be necessary to take the same measures
  as before.

  As to the question you are trying to solve... I don't see
  One possibility is maybe worth a try.

  Photo Gallery has an exclusive database that can
  corrupted. Uninstalling / reinstalling Photo
  Gallery does not affect the database.

  I suspect that your version of the database:
  Pictures.PD6 or Pictures.pd7.

  If you are looking for and rename this database to
  something like... OLDPictures.pd6... it forces
  Photo Gallery to create a new instance of the
  the database as soon as it is launched.

  If you decide to try this... know that you
  may lose a few inches and metadata... and your
  Photo gallery will need to be filled again.

  The following article is not about Windows 8
  but would better understand the issue.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  The fixit in the article is the one that you have already tried
  so it will be probably useful.

  Good luck...

• Error "could not resolve the question of Convergence.

  Hello

  I work with the Multisim13 and I when I am trying to implement the design attached shows a window saying ""failed to resolve the issue of Convergence"as shown in attachment."

  I found similar topics here

  http://forums.NI.com/T5/circuit-design-suite-Multisim/how-to-solve-simulation-error/m-p/838043/highl...

  http://forums.NI.com/T5/circuit-design-suite-Multisim/problem-with-simulation/TD-p/2603281/highlight...

  BTU were not up to the solution to this.

  Thank you.

  According to the OPA381 data sheet, it is designed to work with capacitive loads up to 100 pF, by inverting the configurations of the amplifier and as an amplifier to transimpedance, which is usually used with a current input (very low) and comments fairly large resistances.  Your circuit works with capacitive loads of ~ 5 uF (50000 x the design load), unity gain, setting up inverted, and with an input voltage.  Depending on how the model for the OPA381 manages these outside normal range values, convergence errors are not too surprising.

  The network of coupling between stages has a low pass cut off ~1.3 Hz. The first entry of the step network is more complicated but also the limits of bandwidth at very low frequencies.

  What is this supposed to do?

  I faked coupling and feedback networks (assuming ideal unity gain amplifiers). It is the output with a 1 volt of entry.

  

  Lynn

• The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  Hello, I am running Windows Vista Home Premium and trying to make Windows backup on DVD, I was able to cross 5 DVDs then it asked me to insert the DVD successfully n ° 6 I did and he never finished and I got this error:

  The backup has failed. An error has occurred. The following information can help you resolve the error: the request has been aborted. (0x80099704D3)

  The DVD I have are DVD so I can't rewrite over and over again. Can I somehow he pick up where it left off to complete my backup?

  Help! Thank you

  Lisa

  Hello

  -No, I don't have third-party backup programs installed.

  -J' tried using another disk backup, but it started it count once again as "disk 1" yet I had left off to "drive 6"and I couldn't tell if he has taken over where I left off or starting on even once, I don't want to do because I can't rewrite on my DVD. , because they are disposable.

  Because I needed to achieve this, I advanced and bought more DVD and will continue to backup even if I do not know where she had stopped. I think I can say that it not continue starting above and to the right.

  I think that the problem might have been that DVD #6 was bad, as he had a scratch on her, even if it was new out of the envelope.

  Software AV is not the issue, I am able to do backup, I wanted to just be able to pick up where I left off, as opposed to duty again since the beginning of my documents again. I just wish that Windows backup has been a little easier to use, in particular the fact that it is not "tag" my files to show who we are it is already saved, just like other software, (ex Mozy), which is very useful. And be able to choose what files I need backup rather than being limited to simply choose the 'file type '...

• Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and still have not been able t

  Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and not yet able to get past the basics make me very frustrated.

  I guess you meant the links when you open photoshop CC. I tested all four videos of the 23 min tutorial and they all played fine. If something between you and adobe does not work correctly.

  • Check that your firewall is blocking the net. Try to access youtube videos and see if they play very well
  • Go to the adobe tv site and try to play one of the videos here. Adobe TV
  • If youtube plays very well and adobe tv does not work, next is to check if you have flash installed. Some videos require flash, others are html 5. Sorry that I could not confirm what player has been used for this tutorial. I think that html 5 but not sure.
  • Next is to look at the properties of your browser and check multimedia settings are not disabled if it y in a. (this is totally dependent on the browser)

  If none of this helps, let us know.

• Error 105 - unable to resolve the addresses of DNS servers

  Hello! I'm sorry from the start for many stupid questions, I'll ask. I am a beginner :) I don't know if my rooter is the problem or the network cable, when I use cable internet, it works (bad but it works). When I try to go with my router (d-link dir-635) it appears the error 105. I tried all your suggestions, but still nothing. I can do something else or my rooter is dead? PS: I am on Windows 7. Sorry to bother you again!

  Hello

  Please contact Microsoft Community.

  According to the description, it looks like you cannot resolve the address of DNS servers. The probable cause of this problem may be due to the DNS.

  I have a couple of steps that should help you to solve this problem.

  Method 1:

  Try the resolution of the problems mentioned in this link

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Visit this link and see "How can I clear the DNS cache?

  http://Windows.Microsoft.com/en-us/Windows7/DNS-domain-name-system-frequently-asked-questions

  Method 3:

  Try to assign the DNS manually and check

  To change the settings of the adapter wireless network connections.

  a. Click Start, type network and sharing Center in the start search box and press ENTER.

  b. click on change settings card, right click on wireless network connection and click on Properties.

  c. Select Internet version 4 Protocol, click Properties.

  d. place a next point to use the following dns server address.

  change the preferred dns 208.67.222.222 and dns auxiliary as 208.67.222.220 and click on validate the output parameter and click on ok.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Unable to control the error message calendar get "check your account information and agree with him.

  I am unable to order a calendar in iPhoto.  Continue to receive the error message "your account information has changed.  "Please review you account information and approve it.  My delivery/billing address is correct.  Please notify.

  Access your account online and delete page and re-enter all billing information.  Also make sure you have the correct print product store deleted in the pane of the Advanced preferences in iPhoto.

  Restart and try again.

  

• Unable to get the error Code Windows Update 0 X 80076424

  When the Windows Update of Vister site I get error Code 0 X 80076424 and I am unable to find a solution, can help you?

  Thank you

  Shashi

  Hi Shashipatel,

  1. were you able to download and install updates as soon as possible?

  2 are you able to verify updates?

  3. have you made changes on the computer before this problem?

  4. What is the error message or an exact error code?

  5. have you connected external devices other than the keyboard and mouse?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer in normal mode once the diagnosis is complete.

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Help required to resolve the error-200022

  Hi all

  I have a VI that throws the error-200022 (after acquiring data mx). This has got 5 data acquisition channels off 2 of them (THERMOCOUPLE sensors channel 1 & pressure - channel 1 commented on the left within the program) are throwing this error and do not read whatever it is reasonable and the program stops. However the other channels are read good values. When I checked the individually, it works perfectly fine but when I put them together in the same program he throws the error above.

  I looked into some of the suggested solutions, but nothing did. Can someone help me solve this error. I have attached the VI as well.

  Thank you very much

  Rivet

  I have it..!
  You use "embedded Clock' for all the three tasks (thermocouple measurement) and its causing conflict... !!

  

  If you see here, the main reason (as I already specified it) is "resource requested by this task has already been reserved by another task." "" ...

  I suggest you club all three tasks into one...!

  

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• How can I resolve the error message "Failed to enumerate a device appropriate." for the game "Toy Story 2" for PC?

  I have this old PC game called "Toy Story 2" for Windows 95/98 operating system in time and can't launch the .exe.

  A month ago, I had a much older graphics card, nvidia GTS 250 if I remember correctly, and I have my Windows 7 Home Prenium edition is installed.
  With this graphics card, the game would launch correctly, the screen 'Resolution to define' before entering the game, which means that the game worked fine on my nvidia GTS 250, without displaying the error message:
  Cannot enumerate a suitable device.
  
  
  Recently, my GTS 250 was gone and I was forced to upgrade. I bought a nvidia GTS 450, as well as some other new games because of my new, more powerful GPU.
  After that I installed the device, downloaded the latest drivers to work and click on the toy2.exe icon, a cmd command prompt appears followed by a black screen, enter full screen mode, then close immediately before it allows you to set the resolution of the game, the error next message just after:
  Cannot enumerate a suitable device.
  
  
  What does the above statement mean?
  This game does not work on recent graphics cards?
  Is this a driver problem?
  I tried all the options (Windows 95, 98, 2000, etc.) compatibility, tried as Admin, tried to work on my windows XP machine, they do not let you change the graphic acceleration under windows 7, basically, I tried almost everything.
  The game is not recognize the graphics card because it is too new? Is there a way to force the application to use my GTS 450? A way to force the application to start with a comprehensive resolution?
  Any input is greatly appreciated, I really miss playing this game so bad :(

  Seems that this game has some compatibility issues with newer systems. I suggest you post this question on the support forum for Disney page.

  Hope this helps

  Eddie B.

• Unable to display the error message using the controller extension

  Hello

  I am trying to extend standard iproc CheckoutDistsCO. I have to display the error message when the quantity entered is '0 '. So I wrote logical when you click on the apply"" button. I created an extension CheckoutDistsCOEx & written logic here... but I am able to see messages in the log file, but no error message on screen.

  After having many forums I place super.processFormRequest (pageContext, webBean); at the end. It start always error message.

  Standard CheckoutDistsCO has a logic in the button apply. I think it is the substitution of the extension code... How can I fix? Pointers appreciated please

  package xxtr.oracle.apps.icx.por.req.webui;

  Import oracle.apps.fnd.framework.OAApplicationModule;

  Import oracle.apps.fnd.framework.OAException;

  Import oracle.apps.fnd.framework.OAFwkConstants;

  Import oracle.apps.fnd.framework.OARow;

  Import oracle.apps.fnd.framework.OAViewObject;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;

  Import oracle.apps.icx.por.req.webui.CheckoutDistsCO;

  Import oracle.jbo.domain.Number;

  java.lang.String import;

  public class CheckoutDistsCOEx

  extends from {CheckoutDistsCO}

  {} public processRequest Sub (pageContext OAPageContext, OAWebBean webBean)

  super.processRequest (pageContext, webBean);

  }

  {public processFormRequest (pageContext OAPageContext, OAWebBean webBean) Sub

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  pageContext.writeDiagnostics (this, 'seized in PFR method", OAFwkConstants.STATEMENT);

  If (pageContext.getParameter ("Return")! = null) {}

  String applyevent = pageContext.getParameter (EVENT_PARAM);

  If (applyevent.equalsIgnoreCase ("return")) {}

  pageContext.writeDiagnostics (this, "clicked the Apply-back button" + applyevent, OAFwkConstants.STATEMENT ");

  OAException message = new OAException ("clicked on Apply-back put the message in the dialog box" + applyevent, OAException.INFORMATION);

  pageContext.putDialogMessage (message);

  OAViewObject poreqdistvo = (OAViewObject) am.findViewObject ("PoReqDistributionsVO");

  pageContext.writeDiagnostics (this, "display object = >" + poreqdistvo, OAFwkConstants.STATEMENT);

  OAAdvancedTableBean xxProjectDistsAdvTable = (OAAdvancedTableBean) webBean.findChildRecursive("ProjectDistsAdvTable");

  Line OARow = (OARow) poreqdistvo.getCurrentRow ();

  If (line! = null) {}

  pageContext.writeDiagnostics (this, "line Found"+ row, OAFwkConstants.STATEMENT);

  Number of xxtrqty = (Number) row.getAttribute ("ReqLineQuantity");

  pageContext.writeDiagnostics (Thi, "get attribute reqlinequantity" + xxtrqty, OAFwkConstants.STATEMENT);

  If (xxtrqty.intValue () == 0) {}

  pageContext.writeDiagnostics (this, "in comparing to 0 xxtrqty" + xxtrqty.intValue (), OAFwkConstants.STATEMENT);

  throw new OAException ("Enter valid amount", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("no line Found Else", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("not in"apply button", OAException.ERROR);

  }

  super.processFormRequest (pageContext, webBean);

  }

  }

  Thank you

  TR

  For example, when you comment on the super. PFR, you receive the error message on the right of the screen?

  Can you try this code and paste the debug log.

  public class CheckoutDistsCOEx extends CheckoutDistsCO {
      public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
          super.processRequest(pageContext, webBean);
      }
  
     public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {
    //super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          pageContext.writeDiagnostics(this, " ----> Entered into PFR Method", OAFwkConstants.STATEMENT);
          String applyevent = pageContext.getParameter(EVENT_PARAM);
    pageContext.writeDiagnostics(this, " ----> applyevent: " + applyevent, OAFwkConstants.STATEMENT);
          if (applyevent.equalsIgnoreCase("return")){
    pageContext.writeDiagnostics(this, " ----> Inside If", OAFwkConstants.STATEMENT);
              OAViewObject poreqdistvo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
              OARow row = (OARow)poreqdistvo.getCurrentRow();
    pageContext.writeDiagnostics(this, " ----> row : "+ row, OAFwkConstants.STATEMENT);
              if (row != null) {
    Number xxgesqty = (Number)row.getAttribute("ReqLineQuantity");
    pageContext.writeDiagnostics(this, " ----> xxgesqty : "+ xxgesqty, OAFwkConstants.STATEMENT);
                  if (xxgesqty.intValue() == 0) {
    pageContext.writeDiagnostics(this, " ----> throwing errro : ", OAFwkConstants.STATEMENT);
    throw new OAException("Enter Valid Quantity ",OAException.ERROR);
    }
    }
              else {
    pageContext.writeDiagnostics(this, " ----> No Row Error", OAFwkConstants.STATEMENT);
    throw new OAException("No Row Found Else ",OAException.ERROR);
    }
    }
    pageContext.writeDiagnostics(this, " ----> Calling Super", OAFwkConstants.STATEMENT);
          super.processFormRequest(pageContext, webBean);
      }
  }
  

  See you soon

  AJ

• How to add a 'hint' in my query to resolve the error "hash aggregation can be done."

  I have a query Oracle 10 SQL that works very well in the environment of train, but fails live (presumably because of the volume). I get the error. "ORA-00600: internal error code, arguments: [32695] [hash aggregation cannot be done.  Google suggests that I can use a trick to fix this if I'm luckey (i.e. "NO_USE_HASH_AGGREGATION"). How to incorperate a 'hint' in my query?  (where in my query I would put the suspicion and what kind of syntax)?  Thank you!!!

  Optimizer tips shouln can't be used to try to solve the problems, they should be used to analyze issues.

  Before attempting to apply patches of poor to an unknown cause, you'd be btter to identify what is the real problem.

  ORA-00600 errors indicate an internal error and should be reported to Oracle via My Oracle Support (it is also a search tool of ORA-00600 on My Oracle Support, which can help to tell you if it is a known problem that is fixed by a solution of workaround or bug fix/patch etc..)

  Do not use the tips where they should not be used.  Correct the cause of the problem, not the symptom.

• helps to resolve the error

  Hai friends,
  When I run a project in netbean IDE I get the error:
  
  
  
  F:\Resource Allocation of Cluster Computing is not a valid directory
  at org.apache.tools.ant.taskdefs.Java.setupWorkingDir(Java.java:848)
  at org.apache.tools.ant.taskdefs.Java.setupExecutable(Java.java:818)
  at org.apache.tools.ant.taskdefs.Java.fork(Java.java:781)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:211)
  at org.apache.tools.ant.taskdefs.Java.executeJava(Java.java:132)
  at org.apache.tools.ant.taskdefs.Java.execute(Java.java:105)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:394)
  at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
  at sun.reflect.GeneratedMethodAccessor133.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
  at org.apache.tools.ant.Task.perform(Task.java:348)
  at org.apache.tools.ant.Target.execute(Target.java:357)
  at org.apache.tools.ant.Target.performTasks(Target.java:385)
  at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
  at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
  at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
  at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
  at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:278)
  at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:498)
  at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
  Result of Java:-1
  BUILD successful (total time: 0 seconds)
  
  
  
  Please help me solve this problem

  The directory exist?

  What output you get when you open a command prompt window and type

  C:\> dir "F:\Resource Allocation for Cluster Computing"
  

• How do I resolve the error "421 Service not available.

  Hello
  
  Can someone help to solve the "421 Service not available" error I tried to send emails with three different smtp servers.
  
  the error I get this error: -.
  
  ERROR on line 1:
  ORA-20000: cannot send an e-mail: ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." SEND_MAIL', line 34
  ORA-06512: at line 1
  
  
  Thanks in advance
  Uttam Singh

  This problem on the SMTP server.

  You should check with the system administrator.

  Maybe your server via SMTP SSL SMTP.

  problem sending mail with UTL_SMTP (STARTTLS)?

  or try

  UTL_SMTP.command (conn, 'STARTTLS');