Unable to save the configuration of PC5424 after power off the power

Hello

I am to set up the switch of PC5424, I set the admin/password and IP through the wizard of initiation. Access this switch using the IP through IE and I configured two VLANS in the pages web of DELL OpenManage Switch Administator and then I applied the changes.

I activated the switch and run it after several minutes. But I found that the VLANS configured dissappeared! How can I save my changes permanently?

Thank you


Tags: Dell Switches

Similar Questions

  • Unable to save the files to my device (Flash disk)

    Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

    Thank you

    First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

    Good luck

    Free Support Tools

  • LIBTUX_CAT:582: ERROR: unable to save, the full registry table

    When we tried to call one of our service 100 times at the same time we had an error like: -.

    181936.547.MLXWTAIXDEV! GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: unable to save, the full registry table
    182718.591.MLXWTAIXDEV! GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration


    Can someone help us on why this error is coming.

    The configuration of UBB for even is like: -.

    MAXACCESSERS 350
    MAXSERVERS 430
    MAXSERVICES 1200
    MAXGROUPS 100
    MAXNETGROUPS 20
    MAXMACHINES 256
    MAXWSCLIENTS = 100
    MAXACLCACHE = 10
    MAXPENDINGBYTES = 100000


    'TMMETADATA '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - / dev_app/dtux5/bin/reposfile f.
    RESTART = Y
    SRVID = 1
    GRACE = 3600
    MAXGEN = 5

    'GWWS '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - iGWWS1'
    RESTART = Y
    SRVID = 2

    Wsdf file

    < definition
    xmlns = "http://www.bea.com/Tuxedo/WSDF/2007."
    name = "EBATEST" wsdlNamespace = "urn: salt." EBATEST.wsdl">
    < WSBinding id = "CURTEST_Binding" >
    < SOAP >
    < AccessingPoints >
    < endpoint
    address = "http://10.16.114.145:7001 / ebaapp" id = "eba_HTTP_IN" >
    < / endpoint >
    < / AccessingPoints >
    < / SOAP >
    < Servicegroup id = "ebatestGrp" >
    < name of Service = "SCD_GET_TRD_UND" > < / Service >
    < / Servicegroup >
    < / WSBinding >
    < / definition >


    And salt file used for manufacturing saltconfig

    < deployment xmlns = "http://www.bea.com/Tuxedo/SALTDEPLOY/2007" >
    < WSDF >
    "< import location="/dev_app/dtux5/bin/example.wsdf "> < / Import >
    < / WSDF >
    < WSGateway >
    < GWInstance id = "GWWS1" >
    < inbound >
    < link ref = "EBATEST:CURTEST_Binding" >
    < use endpoint = "eba_HTTP_IN" > < / endpoint >
    < / binding >
    < / entrants >
    Properties of <>
    < property name = "enableSOAPValidation" value = "true" / >
    < / properties >
    < / GWInstance >
    < / WSGateway >
    System <>< / system >
    < / deployment >



    The generated trace file is like: -.


    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184541.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184541.722.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281396]
    184541.723.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 1 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: username: mamu2:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: Sbaw id: 281396:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: company id: B21001:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: business msg: invalid user: ID entered is not valid
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: name of the Service: SVC_SESSION
    184541.727.MLXWTAIXDEV! svr_session.11043070.1.0: no data in the Session table for: mamu2:,: 281396:
    184541.728.MLXWTAIXDEV! GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
    184541.729.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184700.522.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184700.522.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184700.523.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: TIMEOUT VALUE IS [9999]:
    184700.524.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: SESSION [281397] IS VALID:
    184700.538.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184700.538.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.692.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.693.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: TIMEOUT VALUE IS [9999]:
    184707.694.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: SESSION [281397] IS VALID:
    184707.710.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.711.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.718.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: TIMEOUT VALUE IS [9999]:
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: SESSION [281397] IS VALID:
    184707.732.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.732.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: TIMEOUT VALUE IS [9999]:
    184707.740.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: SESSION [281397] IS VALID:
    184707.756.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.756.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.771.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.798.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.799.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.807.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.821.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.821.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.831.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: TIMEOUT VALUE IS [9999]:
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: SESSION [281397] IS VALID:
    184707.843.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.843.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: TIMEOUT VALUE IS [9999]:
    184707.857.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: SESSION [281397] IS VALID:
    184707.869.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.869.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.876.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
    184707.899.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.899.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.907.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
    184707.908.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
    184707.918.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.919.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.932.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
    184707.945.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.945.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.957.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.973.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.980.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]


    Kind regards
    Anurag

    Hello

    Tuxedo documentation, LIBTUX_CAT:582 is described as follows with a recommended action.

    >
    582

    ERROR: Unable to save, the full registry table

    Description

    The BEA TUXEDO system was trying to find a location in the registry table for a process, but the registry table was full.

    Action

    Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, and then restart the application and try again.

    >

    So try increassing MAXACCESSERS and see if the problem goes away.

    Kind regards
    Todd little
    Chief Architect of Oracle Tuxedo

  • Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

    Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

    I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

    I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

    It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

  • Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

    Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

    You have installed the Ghostery add-on or something similar?
    It can block Google analytic and .js file could not be read.

  • Error message "" unable to save the MP Servic &#62; exe "to windows NT or Services"

    Error message "" unable to save the MP Servic > exe "to windows NT or Services"

    I get this message trying to install a Canon printer

    Jim

    A few quick questions for you:

    • What printer model
    • Have you tried uninstalling and reinstalling the printer
    • You, the drivers are up-to-date

    You can try and run the difficulty he tool and see if that solves your problem

  • Unable to save the name of file in Notepad with * (asterisk)

    We are unable to save the name of file in Notepad with * (asterisk)... with this offer special symbol... why?

    I had to ask about the asterisk "" * "symbol..."

    The asterisk is also a special character that cannot be used in a file name or a folder.

  • Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

    Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

    You are not allowed to write to the specified folder.

    CHEK your access privileges.

    Also: in case you save to a network: do not.

    Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

    If you need additional assistance, please we say system and version of Illustrator and where you want to save.

  • I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

    Thank you

  • Unable to save the document as...

    I get "Unable to save the document as" whenever I try to save or save as.  Tried to save in many different locations, file names & versions of flash.  Nothing works. Any suggestions? Thank you!

    Recording in version CS4 to CS5 seems to work.

  • Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Hello

    Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

    Concerning

    Vivek

  • Unable to save the file in the site after upgrade

    Just upgraded to the new version of Muse.

    Open my site, tried to "save under" with a name change. Could not. Also not able to "Save".

    Have tried several times. Have now a few versions "recovered."

    When backups fail, I get:

    3128: Save as failed.

    [SPLErrorEventtype = "error" bubbles = false cancelable = false

    error = SQLError: ' error #3128: disk i/o error has occurred. ", details:", "

    [operation: "compact"]

    Same message if I just tried a "Save". Also, the error is sometimes 3125, not 3128.

    Never had this problem before. Have to do some work on the site. Is it possible to revert to the previous version of the Muse?

    Farewell wrote:

    I have work earn 10. Backup to local drive (C), which has about 1.3 TB of space available.

    The location of documents Windows 10 My a special locks to stop lossing pers people their files by mistake... you can try to make a new folder on the c drive {c: test record} and save the site in that folder?

  • Unable to save the files on the desktop computer.

    After a restoration of the system, I am unable to save files on the desktop. Also, when I run that h & R Block software from my office, I get the following error

    "No permission to write to the directory. (see WinFileWriterImpl:open())

    No idea how I can fix this problem?

    Thanks in advance

    Why do you run the system restore?
    You had a problem before with saving files?

    You can save files to a folder on C:\?
    There are errors in the event viewer?

    Note

    To open Event Viewer: click on the Start button. In the search box, type and then event viewer from the list of results, double-click Event Viewer.

    Search in the application or system event logs and red error report.

    Thank you

    Marilyn

  • Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

    Original title: Family Safety filter configuration problem.

    Hello.

    I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

    When I click Save I get this

    The system cannot find the specified file 80070002 error code.

    I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

    Help, please.  I appreciate it.

    Thank you

    GISIGER

    Hi Greg,.

    Thanks for the reply.

    Run the System File Checker tool.

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833

    Also reset Windows update components and check if this solves the problem.

    Refer to this link:

    http://support.Microsoft.com/kb/971058

     

    Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Keep us informed on the status of the issue.

  • HP ENVY 4520 all-in-one: unable to save the new printer

    To register, the first thing required is a model #, & when I get mine, the answer comes back - 0 results found. I can go no further, until they recognize the printer they sold to me.

    Hi @elebit,

    Welcome to the HP Forums!

    I noticed that you are unable to save your new printer HP ENVY 4520. I am pleased to see that for you!

    Please, take a look at the Plug, for this printer. Who have the exact model number and try to save again.

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    I hope this helps!

Maybe you are looking for

  • Inbox displays white page in the default font size

    When you visit Google Inbox in two of my books (the office works OK), I have a display problem weird quite appear empty (see image). If I open an email and start scrolling down, then the fonts appear. I have the latest version of Firefox in all three

  • How can I find a graphics driver for my hp compaq dc7100 sff

    My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  • To try the beta of Windows Server '8 '.

    Hello I am (I am doing everything) two small nonprofits who is both very computerized in their demand for services.  My vision that their development involves the inevitable expansion in technology database server.  I'm still very much in the learnin

  • Is there a way to make the LPT1 port EPP in Windows?

    Original title: is there a way to make the LPT1 port EPP in Windows? I have some parallel setting in BIOS for EPP is selected. Device Manager he calls an ECP port. The device requires PPE runs correctly. Is there a way to make the LPT1 port EPP in Wi

  • Constant hang-ups

    My HP laptop quite often displays the following message: "a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available. "Does anyone have any suggestions what is the cause and how to