Unable to save the name of file in Notepad with * (asterisk)

We are unable to save the name of file in Notepad with * (asterisk)... with this offer special symbol... why?

I had to ask about the asterisk "" * "symbol..."

The asterisk is also a special character that cannot be used in a file name or a folder.

Tags: Windows

Similar Questions

  • Unable to save the modified Acrobat file

    Hello.  I know that this question has already been asked.  But I have tried the solutions and they have not worked for me.

    I work with Adobe Creative Suite 4 Design Standard for Mac OS.  My OS is 10.6.8.  The specific program is Adobe Acrobat 9 Pro, version 9.0.0.

    I edited my paper with redaction tools.  When I tried to save it, he said: "the document could not be saved. The file may be read-only or another user can open. Please save the document under a different name or in a different folder. "I tried to save with a different name and different folder and it still saves.

    I also get a Mac error message that says: "the document could not be saved. There was an error of Macintosh (-51) system. "Now that I've tried to save so many times, I get this error Mac and not the fault of Adobe.

    For some users, the problem has been resolved by disabling "protected mode", but this feature was introduced with Acrobat X.

    Thank you.

    First, install all the updates that are available for your version.

    You can get them from here: ftp://ftp.adobe.com/pub/adobe/acrobat/mac/9.x/

    You need to download and install them in a sequential order.

  • Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

    Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

    The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

    If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

    Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

    1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

    2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

    1. Click the Start button, point to settings, and then click Printers.
    2. Double-click the add printer icon.
    3. Click the next button.
    4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
    5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
    6. In the available Ports box, click FILE, and then click Next.
    7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
    8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

    3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

  • Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

    Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

    You have installed the Ghostery add-on or something similar?
    It can block Google analytic and .js file could not be read.

  • Unable to save the files to my device (Flash disk)

    Unable to save the files in my flash drive. It is given the message that it is complete, although it is not even half full. Furthermore, when I tried to eject, there will be a message that I have shuold close all files using even when there is none.

    Thank you

    First of all, I would like to make a backup of all the files somewhere safe. Just in case something goes wrong. I would like to make a copy of the files on the computer. Format the USB. Then copy the files over. If after a format, it still has the same problem or she leaves you nothing copy on then the memory stick may be dying on you and her is to buy another.

    Good luck

    Free Support Tools

  • I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

    local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

    Thank you

  • Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Receive an error message on UID: uid without an owner for ImageFrame is unable to SAVE the FILE

    Hello

    Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

    Concerning

    Vivek

  • Unable to save the document as...

    I get "Unable to save the document as" whenever I try to save or save as.  Tried to save in many different locations, file names & versions of flash.  Nothing works. Any suggestions? Thank you!

    Recording in version CS4 to CS5 seems to work.

  • LIBTUX_CAT:582: ERROR: unable to save, the full registry table

    When we tried to call one of our service 100 times at the same time we had an error like: -.

    181936.547.MLXWTAIXDEV! GWWS.3568042.1.0: LIBTUX_CAT:582: ERROR: unable to save, the full registry table
    182718.591.MLXWTAIXDEV! GWWS.10432990.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration


    Can someone help us on why this error is coming.

    The configuration of UBB for even is like: -.

    MAXACCESSERS 350
    MAXSERVERS 430
    MAXSERVICES 1200
    MAXGROUPS 100
    MAXNETGROUPS 20
    MAXMACHINES 256
    MAXWSCLIENTS = 100
    MAXACLCACHE = 10
    MAXPENDINGBYTES = 100000


    'TMMETADATA '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - / dev_app/dtux5/bin/reposfile f.
    RESTART = Y
    SRVID = 1
    GRACE = 3600
    MAXGEN = 5

    'GWWS '.
    SRVGRP = "M_JOLT_GRP".
    CLOPT = '- A - iGWWS1'
    RESTART = Y
    SRVID = 2

    Wsdf file

    < definition
    xmlns = "http://www.bea.com/Tuxedo/WSDF/2007."
    name = "EBATEST" wsdlNamespace = "urn: salt." EBATEST.wsdl">
    < WSBinding id = "CURTEST_Binding" >
    < SOAP >
    < AccessingPoints >
    < endpoint
    address = "http://10.16.114.145:7001 / ebaapp" id = "eba_HTTP_IN" >
    < / endpoint >
    < / AccessingPoints >
    < / SOAP >
    < Servicegroup id = "ebatestGrp" >
    < name of Service = "SCD_GET_TRD_UND" > < / Service >
    < / Servicegroup >
    < / WSBinding >
    < / definition >


    And salt file used for manufacturing saltconfig

    < deployment xmlns = "http://www.bea.com/Tuxedo/SALTDEPLOY/2007" >
    < WSDF >
    "< import location="/dev_app/dtux5/bin/example.wsdf "> < / Import >
    < / WSDF >
    < WSGateway >
    < GWInstance id = "GWWS1" >
    < inbound >
    < link ref = "EBATEST:CURTEST_Binding" >
    < use endpoint = "eba_HTTP_IN" > < / endpoint >
    < / binding >
    < / entrants >
    Properties of <>
    < property name = "enableSOAPValidation" value = "true" / >
    < / properties >
    < / GWInstance >
    < / WSGateway >
    System <>< / system >
    < / deployment >



    The generated trace file is like: -.


    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184541.717.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184541.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184541.722.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281396]
    184541.723.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 1 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: username: mamu2:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: Sbaw id: 281396:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: company id: B21001:
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: business msg: invalid user: ID entered is not valid
    184541.727.MLXWTAIXDEV! svr_errlog.11956518.1.0: name of the Service: SVC_SESSION
    184541.727.MLXWTAIXDEV! svr_session.11043070.1.0: no data in the Session table for: mamu2:,: 281396:
    184541.728.MLXWTAIXDEV! GWWS.2277636.1.0: GWWS_CAT:21: WARNING: Tuxedo service returns TPFAIL.
    184541.729.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184700.521.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184700.522.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184700.522.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184700.523.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: TIMEOUT VALUE IS [9999]:
    184700.524.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 2: SESSION: SESSION [281397] IS VALID:
    184700.538.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184700.538.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.691.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.692.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.693.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: TIMEOUT VALUE IS [9999]:
    184707.694.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 3: SESSION: SESSION [281397] IS VALID:
    184707.710.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.711.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.718.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.718.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: TIMEOUT VALUE IS [9999]:
    184707.719.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 4: SESSION: SESSION [281397] IS VALID:
    184707.732.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.732.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.738.MLXWTAIXDEV! GWWS.2277636.1034.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1034.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.739.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.739.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: TIMEOUT VALUE IS [9999]:
    184707.740.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 5: SESSION: SESSION [281397] IS VALID:
    184707.756.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.756.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.769.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.770.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.771.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 6 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.798.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.799.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1548.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.807.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.807.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: TIMEOUT VALUE IS [9999]:
    184707.808.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x 7 x4f1968af: SESSION: SESSION [281397] IS VALID:
    184707.821.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.821.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.831.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.831.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: TIMEOUT VALUE IS [9999]:
    184707.832.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 8: SESSION: SESSION [281397] IS VALID:
    184707.843.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.843.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.855.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.856.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: TIMEOUT VALUE IS [9999]:
    184707.857.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af x 9: SESSION: SESSION [281397] IS VALID:
    184707.869.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.869.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1291.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.876.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.876.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: TIMEOUT VALUE IS [9999]:
    184707.877.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xa: SESSION: SESSION [281397] IS VALID:
    184707.899.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.899.MLXWTAIXDEV! GWWS.2277636.1291.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.906.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.907.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.907.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: TIMEOUT VALUE IS [9999]:
    184707.908.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xb: SESSION: SESSION [281397] IS VALID:
    184707.918.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.919.MLXWTAIXDEV! GWWS.2277636.777.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.932.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.932.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: TIMEOUT VALUE IS [9999]:
    184707.933.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xc: SESSION: SESSION [281397] IS VALID:
    184707.945.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.945.MLXWTAIXDEV! GWWS.2277636.1034.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.957.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.957.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: TIMEOUT VALUE IS [9999]:
    184707.958.MLXWTAIXDEV! svr_session.11043070.1.0: gtrid x 0 x4f1968af xd: SESSION: SESSION [281397] IS VALID:
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: LIBTUX_CAT:585: ERROR: registry disabled table slot index past, impossible to cancel registration
    184707.973.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: received a message from Tuxedo, SCO index = 4095
    184707.973.MLXWTAIXDEV! GWWS.2277636.1548.0: TRACE: ms: Send a http message net, index of SCO = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A HTTP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Message TRACE: ms: A SOAP is received, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.777.0: Transformation of data TRACE: ms: Begin of the request message, type of buffer = FML32, SCO index = 4095
    184707.980.MLXWTAIXDEV! GWWS.2277636.1.0: TRACE: ms: a message to the Tuxedo, SCD_GET_TRD_UND, SCO index = 4095 = service name
    184707.980.MLXWTAIXDEV! svr_session.11043070.1.0: SESS: INPUT IS [mamu2]: [281397]


    Kind regards
    Anurag

    Hello

    Tuxedo documentation, LIBTUX_CAT:582 is described as follows with a recommended action.

    >
    582

    ERROR: Unable to save, the full registry table

    Description

    The BEA TUXEDO system was trying to find a location in the registry table for a process, but the registry table was full.

    Action

    Increase the MAXACCESSERS parameter in the UBBCONFIG file, rebuild the TUXCONFIG file, and then restart the application and try again.

    >

    So try increassing MAXACCESSERS and see if the problem goes away.

    Kind regards
    Todd little
    Chief Architect of Oracle Tuxedo

  • Failed to save the UI resource file...

    Hi all

    I have to pass a CVI 6a 2013 CVI.

    After working the binding DLLS/LIBs now everything compiles and links fine and the exe works as expected.

    But there are some users that I have to edit resource files. As soon as I open one of them (a few seconds) or when I want to change one little thing, and then save the file I get the error message next message (see attachment):

    Unable to save the user interface resource file '... uir ' (the file is not a user interface file or damaged)

    What is the problem and how to solve?

    Any idea is welcome.

    Best regards

    Andreas

    Hi all

    Thanks for your ideas.

    I oversaw that effort to push the standard of the button Save of the cvi after I clicked away the strange error messages.

    Strange but true: If the IUR files are saved now (in the appropriate format) and error messages no longer appear.

    I think that there is a small bug (or format or any change...) in 2013 CVI when overtaking of the UIR of CVI 6 files.

    Good day.

    Andreas

  • Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

    Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

    You are not allowed to write to the specified folder.

    CHEK your access privileges.

    Also: in case you save to a network: do not.

    Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

    If you need additional assistance, please we say system and version of Illustrator and where you want to save.

  • Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

    Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119

    I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show.  When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself.  If I enter the date and click on 'Ok', the date is not recorded.

    I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.

    It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.

  • Can I globally change the names of files and or directory to lowercase to uppercase?

    in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

    A single configuration change probably will not accomplish this.

    Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

    Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

    HTH,
    JW

  • Error message "" unable to save the MP Servic &#62; exe "to windows NT or Services"

    Error message "" unable to save the MP Servic > exe "to windows NT or Services"

    I get this message trying to install a Canon printer

    Jim

    A few quick questions for you:

    • What printer model
    • Have you tried uninstalling and reinstalling the printer
    • You, the drivers are up-to-date

    You can try and run the difficulty he tool and see if that solves your problem

  • Want to copy and paste the names of files only, not the content

    I have organized hundreds of files in several folders of dozens and that you must first create a list or map of all files.  I want only the names of files, not other thing.  I found some freeware that seems designed to do this, but am reluctant to download.  Can it be done without additional software?  If I can't do the regular windows environment, someone suggest what software is the easiest to achieve?

    There are a lot of reliable freeware websites.  What program have you found, and this web site is on?

    To do the work of the normal Windows environment, click Start > all programs > Accessories > command prompt and enter these commands:

    CD /d "" path ".
    dir/b/s >"" file     ".

    where:

    path = full path to the file
       file = name of the file to write

    For example, to create a list of files in My Documents and write it to a file named My Documents.txt :

    CD/d "C:\Documents and Settings\Utilisateur\Mes Documents"
    dir/b/s > "My Documents.txt."

    The /s parameter lists the files in the selected folder and all its subfolders.  The omit if you want just the files in the selected folder. Boulder computer Maven
    Most Microsoft Valuable Professional

Maybe you are looking for

  • Elite X 3: X 3 start the camera

    Hello. Is there a a way to open the unit without connecting it to the lock screen?Is there a button on the camera, which acts as a shutter button?

  • Windows image acquisition

    I can scan is no longer on my canon D480 image class. I get the message "windows could not start Windows Image Acquisition (wia) service on computor local e.» Error 1068 the dependency service or group could start

  • my email blocked

    I am the owner of * address email is removed from the privacy * and blocked now 2 weeks time, plse I want to recover my email address thkxx

  • Problem copy in an email

    When you try to copy it from the body of an email, the usual method of keep the left button of the mouse pressed and covering material!

  • OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??

    OfficeJet 6500 a installation disc will auto does not start on my thinkpad win 7. ??