Windows image acquisition

Similar Questions

• Problems to import pictures from my Canon Powershot A580 - Windows Image Acquisition?

  All the photos I import into Adobe transfer in a .tiff because of a TWAIN link images?  What I have read that I need Windows Image acquisition.  Can I download this?  If yes where?

  I used to do this with this camera without problems until a recent virus, now I can't it to work.
  Any help much appreciated!

  All the photos I import into Adobe transfer in a .tiff because of a TWAIN link images?  What I have read that I need Windows Image acquisition.  Can I download this?  If yes where?

  I used to do this with this camera without problems until a recent virus, now I can't it to work.
  Any help much appreciated!

  ==================================
  I have a Canon and everything I do is just copy the pictures
  of the memory card. I never install of the
  proprietary software.

  Have you tried to upload photos to a folder on
  your hard drive before import you them into an image
  editing program?

  If you insert the memory card from the camera into a USB port
  media player and go to... My computer... the media
  drive is listed as one or more removable disks...
  If you right click on the removable disk that corresponds
  You can see it with the location of your card is located in the files and
  copy and paste or drag and drop in a folder on your
  hard drive.

  If you don't have a media player... you can connect
  the USB camera and it should show in my computer. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• How do you get the Windows Image Acquisition (stisvc) service to restart?

  HP Pavilion DV6-2088dx running Win 7.0 64 Bit Ultimate

  When I try to restart the Windows Image Acquisition Service I get a message access denied (Services tab in the Task Manager) or an "error 1068: the dependency service or group could start" (in the Services window).

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• Windows Image Acquisition (WIA) is not listed in Services.msc

  I bought a new printer (HP Envy 4502) and it connected wireless to my PC. It prints and copies fine but when I try to scan (the printer and PC), nothing happens - message on printer says "computer does not.

  I tried with my firewall off and still nothing. (Use Bullguard security, windows firewall is disabled).

  After some research more advice is to check if Windows Image Acquisition is on, but when I look in the list of services there is no Windows Image Acquisition - in alphabetical order, he jumps 'Police Windows Cache Service' to 'Windows Installer' (accessible via the command Services.msc)

  I also tried to run sfc/scannow, but who doesn't.

  CHKDSK found no errors.

  I tried to download "Windows_Image_Acquisition.reg" and "RestoreWindowsImageAcquisitionWIAWindows7.bat" without success.

  What can I do to return WIA?

  How can I check what are the other missing services?

  Thanks in advance for any help

  Hello Jeff,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  'Windows Image Acquisition' service provides image acquisition services for scanners and cameras.

  This problem may occur because of damaged or missing Windows files. This can also occur due to incorrect registry settings.

  Please refer to the suggestions marked as answer by Dale Qiao on June 16, 2010 and check if it helps.
  https://social.technet.Microsoft.com/forums/Windows/en-us/6b0e4eb7-3505-443a-9DCC-faf711743faa/has-anyone-seen-WIA-Statup-problems-in-Windows-7-ultimate-x64?Forum=w7itproinstall

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• ERROR POPS UP EVERYTIME I OPEN AND IT SAYS WINDOWS IMAGE ACQUISITION SERVICE IS MISSING

  MISTAKE TO REPLACE ON VISTA

  Hello

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. do you have a printer or a scanner connected to the computer?

  Method 1

  Check and make sure that theAcquisition of Image Windows (WIA) service is running on the computer.

  one), click Start-Run, type "services.msc", click on OK.

  (b) when loading the Services window, go to the "Service Acquisition of Image Windows (WIA), double click on it to open it,

  (c) make sure that the "Startup Type" says "automatic". " If it isn't, use the drop down menu to change.

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  Method 2

  If the previous step fails, see if any third-party program installed on the computer is causing the error message.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIA.dll; Windows image acquisition

  Tech support said Canon I can't install a printer driver, because a file is missing in my system Windows XP (service pack 3), specifically: wia.dll.

  How can I get the file or otherwise remedy the situation?

  Tech support said Canon I can't install a printer driver, because a file is missing in my system Windows XP (service pack 3), specifically: wia.dll.

  How can I get the file or otherwise remedy the situation?

  Are you sure you got the file name correctly?  WIA.dll is not a standard Windows XP file.  If your Canon printer to a file with this name, it must be included with your Canon printer software.

• Windows Image Acquisition Service

  Since the latest service pack of windows has been installed, I get an error message. His readings there is no application registered for this event. The error reappears if try to close. How can I get rid of this error?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• 'Windows Image Acquisition' does not work

  This message has been appearing whenever I start my Windows 7 Professional 64 bit OS PC.

  I get a dialog box with the option of sending information to Microsoft, but nothing else to give an indication of what the error occurred or what action I might be able to take to correct the situation.

  Since I got this message at the start that I was also see a very slow page on some Web sites load.

  Is it possible to repair this problem of "reloading" WIA... If so where can I find the right software to download.

  Any suggestions are welcome.

  To complete this thread, I have a confession to make!

  It seems that the source of the problem was my scanner Canon LiDE 500F omitting "initializing" when starting. The scanner "purrs and snoring" as it initializes during the boot-up... something that I am so used to what I hear is really it... so I didn't notice that this was not the case, doh!

  Where the 'pilot' for the scanner does not load when starting because presumably the system failed because it could not 'see' the scanner.

  A violin with wired usb on the scanner seems to have solved the problem... much to my embarrassment!

  I hope you don't think that I've wasted your time auggy, because tips have led me to the scanner LiDE 500F as the source of the problem, but a physical connection instead of overflow of software problem. Thanks again.

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Blocks the execution of the user Image Acquisition interface

  I am currently trying to create a user interface that displays images from a camera attached to a microscope with a mobile table.  The user is able to interact with the images and can click on them, which causes the table to move to a new location.  Acquisition is made by calling a DLL, the DLL grey flycapture point camera, using a call library function node.

  When I acquire images at 15 frames per second, it has no problem with user input.  However, when I drop the acquisition at 2 frames / second (necessary if you need to have the exposure time), labview seems to take a break from the user interface while the image acquisition is underway.  Interaction of the UI seems possible in the holes between the image acquisitions.

  I'm sure that this is happening because there is a kind of blocking going on here.  The program is waiting for the new image to be returned and will not not something else happen while he waits.  I have image acquisition running in a separate, called function from a higher level, VI, which puts the image data in a global variable (I know I know... global variables).  When I need to display the image, I read of the global variable and display it on my form of user interface.

  I think I need to run things in separate threads to avoid the problems that I have because I have a dependency that is the cause of blocking.  I'm looking for any suggestions on how I can the architect this.  I have thought about using a VI server to launch the acquisition of the camera and will try to implement this, but I wonder if there is another method that I'm missing here.

  Any suggestions would be greatly appreciated!  I use LabVIEW 8.6 on a Windows 7 machine indeed.  I do not use LabVIEW image acquisition module.

  Thank you

  Hey Gerry,.

  It's Paul in Ministry here at National Instruments engineering applications. What Paul was referring to a call library function node configuration properties. If you right-click on the node library function call you can click on configure and you should see a window that looks like the image below.

  

  As you can see, you have the option to select run this library in the UI thread or any thread. This is important because there is only a single user interface thread. Therefore, deadlocks can occur when the code is written in parallel, but operations are both occurring in the UI thread. What results is a part of the code has to wait that the other part at the end and so the lock upwards in the user interface. The reason why the call library function node is set to run in the default UI thread is now, because only the security thread functions can be performed in any thread. So before you change this configuration it is strongly recommended that you check that the functions you call are thread-safe. You can also check which configuration, the node library function call is in the color of the node itself. If it is an orange color which means that it is set to run in the UI thread. If it is a pale yellow color, it is set to run in any thread. Let me know if you have any other questions!

  Paul M

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• Vision image acquisition

  I have image acquisition via a USB camera to a 12 speed.  The problem I have is to save these images.  If I save these images while acquiring data, the program cannot keep up at this rate.  I need a way to get images to 120 and then save them once the acquisition completed.  I tried to build a table, but it doesn't seem to work (the issue is when I have the array index, I do not get out images).  Any suggestions on this approach or maybe a different approach to achieve this.

  Thank you.

  Hey, gene,

  Guess IMAQ Vision + IMAQ USB was used.

  The typical error is grouping table of images IMAQ. Do not forget, that the IMAQ image passed as reference, not the image itself. This means, the following code will not work as you expect:

  

  What you need is the following. You must create your buffers before acquisition, then acquire each image in the own buffer:

  

  It will be useful,

  Andrey.

• Where can I download the 64-bit version of the Windows Imaging Component (wic_x64_enu.exe) of?

  I need the 64-bit version of the Windows Imaging Component as a sine qua non for .net 4.0 but I can't seem to find a download for it.

  The link that I keep finding is no longer available:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=F64654AC-6E26-41D9-A90A-0E7783B864EE&display
  If however, I go to the download page for 32-bit, I can download the 32-bit version without problem.
  Anyone know where I can find this download?
  Thank you.

  Hello

  If found the wic_x64 on this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1385

  Now my. NET.4.0 install works

  TWSS

• The appication or DELL is not a valid windows image

  Whenever I try to open a an application like outlook or Dellcenter pops up a window with the notification as follows "the application or the Dell...". is not a valid windows image. Who can toresolve this problem closer. I did everythink

  Hello

  ·         Did you the latest changes on the computer?

  ·         You have security software installed on the computer?

  ·         The problem occurs with all programs on the computer?

  ·         What is the full error message that you receive?

  Method 1:

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this helps