Unable to scp - r of the local data store a host to another data store local host
Using PuTTY to connect to the host server
Running command to copy VM to a data store to another data store (the two DS hosted locally on 2 different servers)
Error: are different major versions of Protocol: 2 vs 1
-J' tried confirmed that the only protocol on two host servers are defined in Protocol No. 1 and as I use Putty I have the Protocol in 1 also, but the same error occurs.
II
1 - Check the SSH configuration on both sides and compare... (/ etc/ssh/sshd_config)
The remote server will only accept v2 connections and you try to do
a connection v1. So either enable support of the v1 on the remote side. Or use
keys v2 and id_rsa/id_dsa.
2. check the versions ESX & patch level you used on both sides (ESX 3 xx build xxx)
3 - also, you can check ssh version of protocol running rpm - qa | grep openssh.
Good luck!
GM
Tags: VMware
Similar Questions
-
Unable to read / write in the NFS data store
Hi all
I'm having a problem with a NFS datastore in Vcenter. I have an NFS share on a Win2k3 server which I am able to mount. However... I can't write him even though the permissions appear to be correct. This server is connected to an array of training Vault EVA Storage with 2 TB of storage.
Looks like he's not more as when I try to mount ad content, it shows as 0.00 B ability... and I know that there are files in the NFS data store. Same Host, I can mount my other NFS datastore successfully since a 2008 Server, just do not know which cannot be configured correctly here.Help, please... been at this for 2 days banging my head on my desk!
Screenshots are attached. If there are log files that I could post that would help, please let me know and I'll join them as well.Thank you!Woot! It worked. I changed the local article, but then authorized security strategy anonymous access with the 2 GID and UID - 2. Once this is done, it is now properly show in Vcenter and allow me to read and write in the data store. Before that I got the value 0.0 even with security policy, change that did not work. So I hope that this issue helps someone in the future, and they do not have a hair pulling experience like I did.
WHAT A PAIN!
in any case, thank you all for your time.
-
Unable to recover the old data synchronization after reinstalling operating system
Hello
I was using Firefox 26. Recently, I've upgraded to the latest version. A few reasons, I had to reinstall my windows 7 OS.
After I installed Windows 7, I installed the latest Firefox and tried to synchronize data. I was unable to connect because I forgot the password. I tried using the link "password forgotten", but he said there is no such thing as e-mail id. It was surprising to me. I'm still all emails, including the secret key, I used to add new devices earlier, since Firefox in my mail box.
Since I left without another option, if I'm creating a new represent now on Firefox with old email ID. The account is created successfully. Again, it is strange to me. However, my old data are not synchronized.
I need the old data. Help, please.
-
Thank you
RaviSorry, Sync was not intended to be used to backup Firefox data before reinstalling the operating system. Its purpose is to synchronize several separate installations of Firefox, usually on the various devices.
The old version of Firefox 26 uses another version of Sync, the latest version of synchronization happen in Firefox 29. The largest variation in sync had to do with the recovery key ('secret key') - is no longer something to see the user or has to deal.
You should have installed Firefox 28 or earlier and then connected to your account synchronization to recover your data and then put updated for Firefox 32. By creating a new account with the same email address, your data has been wiped out by synchronization servers to allow you to start a new.
-
Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119
Unable to save the 'Release Date' field in iTunes/Windows 12.4.0.119
I've just updated to 12.4.0.119 and can no longer add Release Date for a TV show. When I go to "Get Info" and type the release Date, it allows me to enter a valid date, but as soon as I have the label off the field it emerges by itself. If I enter the date and click on 'Ok', the date is not recorded.
I had this same problem Windows 10. Just tested it on iTunes/Mac 12.4.0.119 - this platform will not yet you allow to select the release Date field to make an entry.
It is a major issue, as AppleTV allow no sorting replacing television programs other than by Release Date.
-
all my data records on the local disk c, how to share the data with the other drive, local drive d.
Hi Jasonbichard,
1. what type of drive is D? Is - this another partition on the same disk?
2 Windows operating system you are using?
You can change the location of the disk to save the data in the d: instead of C: and check if it helps.
a. navigate to the location (username) C:\Users\.
b. right click on the folder that you want to change the location, and then select Properties.
c. click on the location tab and change the location to D: drive.d. click on apply and Ok.
-
Original title: locale data file errors... How can I fix it?
can't the facebook home page and when I search the
"Cannot find the locale data files. Please reinstall"pop box.
Hi kjkin,
1 did you change on your computer before this problem?
2 are you able to access other Web sites correctly?
3. what browser do you use?
If you are using Internet Explorer, follow these methods & check if the problem persists:
Method 1You can follow this link & check if the problem occurs:
Can't access some Web sites in Internet Explorer
Method 2You can also follow this link:
How to delete the contents of the temporary Internet files folder?
Reference: Internet Explorer does not start or stops respondingHope the helps of information.
-
Cannot find the locale data files. Please reinstall
I had a problem with Google Chrome, so I uninstalled via the control panel. I then reinstalled and I have this problem. I always present in my programs in the watched folder, but when I select to demolished, he said ' wait until the current program has finished install or changing.» I have no other program install or change. If I try to open Google, anywhere Progams, taskbar, all programs or directly from the .exe LocalApps it gives me the "could not find the locale data files. Please reinstall.
I found the answer to my question. It seems that you can build processes, I don't understand why. For example I had a problem with my windows Explorer crashing. I disabled all the startup process of msconfig.
In my view, there must be something in there that closes a completed process.Then I had, unknown to me, when I posted this problem, six or seven cases Google chrome showing the the Task Manager process tab. When I quit all instances of Google, I was able to finish the removal process and re - install Google Chrome.I just checked right now and I have six Google shown 3 rundll32.exe and two taskeng.exe bodies. I've never seen no more than one instance of anything in this tab before today.Disabling all startup stuff does not solve my problem to explore some way so I'll allow them once again.Thank you for helping me and I hope that someone can get useful information from my travels. -
I received an email indicating that HP does not show me as having all printers which explains why I have not received information of driver update I guess. But when I typed in HP4500 G510, I received the following error message:
Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.
And since I don't know beans about computers, I don't have any idea what it means.
Because I had to pick a topic, I chose the one above, but no other choices were nowhere near cover.
Hi mac64.
I understand you are trying to register for updates for your Officejet 4500. I can certainly help you with this.I'll give you a link to try to register for driver updates. Please let me know if it's the same link you used and if this works differently for you, simply click on the following link: the HP driver updates.
Hope to hear from you soon
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Federated back cached data are saved to disk on the local cluster?
With the new feature Federated consistent caching, 12.2.x, is the internal cache containing rear replication data saved to the local drive?
What happens if the local cluster goes down, when there is great in waiting for data of backlog waiting to be replicated (probably due to remote cluster being down for an extended period)
Can this back then recovered and reread cluster remote automatically when we have cold restart the local cluster?
Any pointers to documentation of coherence on the above issues would be useful.
To persist a Federated Cache, including arrears, all you need to do is configure
on your diagram of federated, as you would for a distributed system. Why? Federated Caches are in fact increased distributed Caches, which basically means that all of the features available for distributed Caches are also available to Federated Caches!
Basically just add the following to your Federated plan
active by default For more information on the new features of persistence, take a look at:
http://docs.Oracle.com/middleware/1221/coherence/administer/persistence.htm#COHAG5327
I hope this helps.
-Brian
-
404 error when viewing the data on the local file
Hello
In the www of the project folder I have file app.xml with some data deserialized when the application starts. I use jQuery GET to read the parameters as in the example:
$.get ("app.xml", {function (data)})
$("#mac").val ($(data) .find ('macAddress') [0] .innerHTML);
});
The question starts with trying to serialize the new data in the file. The easiest way is to use the POST method (I tried also to XMLHttpRequest and FileWriter):
$.post ("app.xml", {function (data)} ")
.find('files').Append $(this) (data);
});
When I run this function, console responds with a kind of access problem (while get works very well):
POST http://192.168.1.11:3000 / App.xml 404 (not found) send @ jquery - 2.1.4.js:8630ajax
I've read about similar problems, the solution was always plugin whitelist cordova. In my case it did not work, in the browser, or the android app.
config.XML:
< plugin name = "cordova-plugin-whitelist" source = "MNP" spec="~1.2.1"/ >
(...)
< access origin = "*" / >
< allow intention href = "" * "/ >"
< allow navigation href = "" * "/ >"
< platform name = "android" >
< allow intention href = "*" / >
< / platform >
It seems to me that I miss some privileges to write data, but it's weird for me that it does not work even in the browser. How should I properly store the parameters of the program?
You are not allowed to write in this directory. You can watch using the plugin file to write parameters to the eligible repertoire, or seek a solution as Local storage for you.
Chris
-
Extremely high latency during the migration of the local data store to data store shared.
Hi guys I hope you help me. Sorry for my English btw, I'm not native.
Let's start!
I have:
1 vCenter
1 host
1 Distributed Switch (with a pg for managing network/IPstorage the esxi)
1 standard switch (empty)
1 FreeNAS to provide iSCSI LUNS
1 Microsoft to provide iSCSI LUNSWhen I try to migrate virtual machines between the warehouses of shared data or data shared at local store, all right. The problem has become when I try to migrate virtual machines from the local to the shared data store. All data stores down (all paths down) and back up and I get this error:
"Error caused by the /vmfs/volumes/volumenID/VMDirectory/Disk.vmdk file.
When I try to migrate virtual machines from the local to the FreeNAS iSCSI data store it fails immediately.
When I do the same local Microsoft iSCSI datastore that it takes a time loooooong to migrate the virtual computer, give it to me even all the paths downwards and uplinks down error but not lacking in migration.I'll give you some screenshots to see the errors.
Thank you very much!
EDIT: I have extremely high latency notice when I try to migrate from the premises of warehouses of shared data. average 2000ms with peaks of 50,000 (see my response below for more information)
Finally, I found the solution! The problem is that I have been using E1000E vmnic instead of vmxnet3. I have configured an adapter vmxnet3 and boom! 20 ms in all migration!
Thank you to all for help, especially Nick_Andreev !
-
Hello
I have an ESX 4.1 with only a data store local (RAID5) on virtual machines on a DELL Server
I want to enlarge the data store, I don't have enough free space to create multiple virtual machines.
To do:
-Install a new hard drive (with vmware powered)
-Add the new hardisk to Raid5 with DELL Open manage
-wait finally extend raid 5
-Power Off Vmware machines? or continue started?
-Develop with local Vshpere the data store vmware (what time must expand?)
I want to know if I can do an extension with the new space unpartitioned on local existing datastore without losing my virtual machines? I have only the local data store with esxi when I develop the esxi continue to work?
Can someone help me?
Concerning
Yes, it's quite OK.
If this solved your problem, please mark it as answered.
See you soon,.
Adil Arif
-
Deployment uses the local data store
The deployment of VIO works without problem, but one of the virtual machines (VIO-DB-0) is now in a local data store. I never chose this data store in the installation process.
Is it possible to manually move the virtual machine? Is it possible to define the data store used for the management of virtual machines somewhere?
Concerning
Daniel
Hi Daniel,.
Take a look at VMware integrated OpenStack 1.0 Release Notes:
- Installer gives priority to local storage by default
When you set up the data for the database stores three virtual machines, VMware OpenStack Setup integrated automatically gives priority to a local storage to improve IO performance. For resilience, users might prefer a shared storage, but the installer does not clear how to change this setting. - Workaround: Before completing the installation process, the installer of VMware OpenStack integrated allows you to examine and change the configuration. You can use this opportunity to change the configuration of the data to the database store three virtual machines.
If you have already installed VIO, AFAIR you should be able to manually move between data warehouses as long as you do not change VM itself.
Note that there is rule anti-affinite, so you may not be able to move that VM in the same data store when no other VIO - DB resides.
Another note is that if you turn off VIO-DB-0, mysql service will not appear automatically. you have to turn on manually by running "service mysql start" on the node itself, or run 'vioconfig start' of the SGD server.
Best regards
Karol
- Installer gives priority to local storage by default
-
Unable to connect Adobe cloud after update the expiration date of credit card
Unable to connect Adobe cloud after update the expiration date of credit card.
The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.
The best option will be to contact Adobe support for this.
Concerning
Stéphane
Maybe you are looking for
-
VGA voltage error message is out motherboard safe voltage 12,0
I turned on my computer after a few days and received a message flashing in red on the advice of doctors from Asus. saying: VGA tension is off safe bound motherboard 12.0? I have no idea what it means that someone can tell me how to solve this proble
-
Not found PRODUCT HP2000 EOP72UA #ABL in your HP product registration
How can I find the information on the computer on WINDOWS 8
-
Microsoft Comfort wireless keyboard
Why don't the bottom row of the keyboard work? The letter z by the question mark do not appear on my document. All other letters work well.
-
I ned help make my MAGICJACK PHONE USB compatible with widows 7. Does anyone with procedue
-
Black glitter and LED monitor S2440L screen
I have a new LED monitor from Dell which flickers to a black screen during market for a few seconds and then turns back on. I can't understand why this happens. It happened when my monitor has been connected to the slot built in HDMI on my motherboar