Unable to set Windows Mail as the pop-up keeps asking the same question for comcast username, etc.

Similar Questions

• Changed in Windows Mail - is the same for all e-mails in the folder

  using version 6.0 of Windows Mail.

  all emails in a few files changed identical to the same text thought that the subject lines are correct. When I open each email text is the same in all of them.

  This is probably due to database corruption that often occurs if antivirus software is installed (see www.oehelp.com/OETips.aspx#3).  What you can do is to try compacting and repairing the database using my Windows Mail utility (www.oehelp.com/WMUtil/) and see if that fixes the problem.

  Steve

• can I use a serial key to install two windows 8 in the same system

  If I double boot windows 8 on the same system. for activation, I use the same key for the two installation.
  is this possible?

  Hello

  Windows 8 comes with only on product key (license) that can be activated on a computer at the same time. If you want to enable another computer with him, then he must be uninstalled from any other computer first.
  The fact above, as I know, the installed on another partition of Windows 8 will become the second computer and unfortunately you can not use the same key.
  Hope this helps, good luck :)

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• Unable to get Windows Mail Server error: ox8CCC7D

  All of a sudden, I am unable to send "Windows Mail. I have "Vista Home Premium". I tried a "System Restore" twice, but he said he did not restore.

  I have AT & T as my ISP. My number out to SMTP is 25 and incoming is 110. On these boxes, I have not checked "requires authentication. I checked 'Requires authentication' in the box under "outgoing under"Servers"server. Any help would be appreciated.

  Thanks, ptfitzy

  Thank you. I discovered an E Mail I sent that went in my "Outbox". When I deleted it, I sent it and now Windows Mail works now. He was watching me in the face all the time.

  Thank you very much for answering.

  ptfitzy

• Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server

  Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.

  Thank you all.

  John Hayes

  Hello

  The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you

• Windows Mail wants to open all attachments with Word rather than Word, Adobe, pad etc. How can I get the attachments to open properly?

  Windows Mail wants to open all attachments with Word rather than Word, Adobe, pad etc. How can I get the attachments to open properly?

  Hello

  1. Click the "Start" menu in the bottom left of Windows. Then select "Default programs".
  2. Click on the option "Associate any type of file or Protocol with a program."
  3. Select the file type you want to change the types of files listed. For example, if you want the text (.txt) file to open it in Microsoft Word instead of WordPad, choose '.txt '.
  4. Click on the "Change Program" button in the upper right window.
  5. In the list of programs, select "Microsoft Word". If Microsoft Word does not appear in the list, click on the button 'Browse' in the bottom right and choose Microsoft Word on your computer.
  6. Click on the button 'OK' and then 'close '. The next time you open this type of file, it will open it in Microsoft Word. Repeat this procedure for any other type of file you want to open in Word.

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  It will be useful.

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  I've been locked out of my email for a month! I remember the answer to my secret question and the default e-mail is the same address!

  Looks like you're talking about Hotmail? If so, please ask here.

  Windows Live Solution Center Forum Hotmail Portal
  http://windowslivehelp.com/product.aspx?ProductID=1

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• Status: 0xc0000428 Windows cannot verify the digital signature for this file.

  This is the message that appears:

  Windows Boot Manager
  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.
  If you have a Windows installation disc, insert the disc and restart your computer. Click 'Repair your computer' and choose a recovery tool.
  Otherwise, to start windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Startup Options, then select last known good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  * So what the hell is happening? Sorry, but am getting very frustrated by that. I noticed that windows creates a file called windows.old. Avoid the old windows, it's an empty hard disk, and it was an installation of full version. NOT an upgrade. As to why my product key does not work... not even me angry by publishing what I've seen elsewhere in these forums. I DO not pay another $200 for a different product key. This one should work. I just opened this "thing" to do the installation. So if this key was stolen, it was stolen that microsoft has packaged discs.

  Can I safely delete this file called windows.old (assuming that I can always go back to windows 7)? Do you think this has nothing to do with the problem? Or should I do what ppl do upgrades mean that they have to do... Reinstall win 7?
  * He let me use F8 for advanced options to disable the driver signature.

  Thank you! Got the product key problem is resolved. I saw on another post, you stated

  
  "The start menu with EasyBCD by NeoSmart Technologies edition should solve your problem, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new window manager.

  http://NeoSmart.NET/DL.php?id=1   "

  Now that address my other question as much as me have allowed difficulty delivers windows boot is seen? I see that windows 7 is a file boot.ini as previous versions of windows. I would like to see the "command-line" some win 7 has instead of boot.ini file uses. I suspect something may be there that causes the driver signature error... and tried the 'bootrec' methods above doesn't solve anything for me.

  Thanks a lot for your help in this matter. (Once I get the verify signature driver disabled it goes straight in win 7 and win 7 works fine.) It just will not be disabled whenever I start my pc. I always have to fight to get the window that gives me the ability to disable.)

• If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer?

  Packed HARD drive

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  If my HARD drive crashes and I have to replace, can I reinstall Windows 7 on the same computer? How the product key is affected? He still believes that I am still on the old HDD?

  Yes.

  Not at all.

  N °

  If you have Windows 7 with an OEM license agreement (it came pre-installed on the computer is the most likely scenario for this, but you can buy OEM copies so) or you have a license to retail (upgrade or full version) - the way your question is worded is very specific - you * can * install Windows 7 costs/clean on this same system as much as you wish.  A new hard drive won't stop you activation - well that at some point, you need to activate by phone, as opposed to over the Internet.

  Now - if the motherboard is replaced and it's licensed OEM and replacement was not that of the OEM that probably set up your computer...  Then you have a problem.

  Unless you happen to have a license of Windows 7 retail sales, so it is not related to the computer (motherboard).

• install two copies of windows oem on the same computer

  Installation of two separate copies of OEM windows 7 on the same computer (an ultimate, a home premium, the two 64 bit) the problem is that I can't hide (do it completely unavailable - mask not only) the first installed OS of each from the second partition (identified as "oem partition") when it is started in the second operating system.

  I would like to do to use the ultimate as a main working OS operating system (be able to load up with various applications, databases of workers etc. etc., that once everything is loaded tends to emphasize the system a little (it does not as effectively as I would like).) I would then use the partition Home premium for latency sensitive things. boot between the two and other work is managed by linux (grub 2)

  the disks are defined as readers of ahci uefi (couple of ssd for boot/apps/pagefile)

  Is it still possible? (even with me having to buy the commercial versions of the os (non - oem), or microsoft is trying to wrest a sort of copy protection scheme

  the two disks (main) are set up as follows
  / dev/sda1 to fat32 (for gpt disks) startup (resized to 500 MB of 128)
  / dev/sda2 unknown ms reserved (this is set here as part of microsofts uefi partitioning installation sequence)
  / dev/sda3 ntfs first installation (7 ultimate) operating system

  dev/sdb1 unknown ms reserved (see above)
  dev/sdb2 ntfs second os install - he actually complains during installation that it cannot install on the partition, but he does it anyway

  Thanks in advance for any help

  I forgot to add the second installed operating system know the partition indicator 'hide '.

  Microsoft has never designed a version of Windows that can hide another version of Windows.  You will need to use a boot improved as Manager:

  http://www.terabyteunlimited.com/BootIt-bare-metal.htm

• Siri is disabled but the pop-up keeps asking if I want to activate.

  After update to Sierra I activated the Siri, but it kept open without prompting, which has been a nuisance. For the next, I disabled Siri in system preferences. Now, a pop up keeps asking if I want to activate Siri. Happen every minute or two and sometimes every few seconds.  How can I stop this?

  

  FWIW, I had installed since the first Sierra developer beta and it is never once opened without asking for confirmation. If accidentally you press command + space bar which will open Siri. I have no idea why, if disabled it keeps asking if you want to activate it unless you are pressing and by now the command + SPACEBAR.