Unable to show the secure pages

Similar Questions

• Printer Photosmart 5520 problem:, I have access to the secure page and cannot open a session

  My printer does not print in black. I followed all the instructions to fix it. I can't go down loard that assistance because it is a Vista. I get to the secure page and he asked my name and my password. I am the administrator, but it does not accept my names or passwords and blocking me. What name and password it seeks?

  Hi @arts4pat,

  Welcome to the Forums of HP Support!

  I see that you get a secure page and that you are unable to print black on your HP Photosmart 5520 e-all-in-one printer. I'd be happy to help you with this.

  I like that you get the login screen for the Built-in Web server for the printer. Is this correct? This seems to indicate that someone has put a username and password on the printer, for security reasons. If you don't know what are the connection information, the only way to remove this is to do a factory reset on the device. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  That being said, I would like to start here. Please, try the steps in this guide, the printer prints blank Page or fact not printing black or color ink for HP Photosmart 5520 and Deskjet Ink Advantage 5520 series e-all-in-one printer.

  NOTE: This problem may be caused by problems with the ink cartridge print head or with the printer ink system.

  If you have completed all the above steps and your product still has a problem, the printer service.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to choose your
  contact options»
  Step 4. Scroll down and click on: contact HP options - click Get phone
  number
  File number and phone number are displayed.

  I hope this helps. Good luck!

• Unable to read the security descriptors data stream

  Whenever I start my computer runs CHKDSK - it says checking file system on E: and then he said that it should be checked for consistency. It works until stage 3 when he says 'impossible to read the security descriptors data stream' how to fix this?

  I tried chkdsk e:/r and it runs before step 3 when I get the "unable to read the security descriptors data stream" and it goes no further.

  I also tried fsutil dirty query e:- but it says something about a parameter incorrect and not if the volume is dirty or clean.

  Then I tried chkdsk e:/f/x - that always gives me the same mistake about it being an incorrect setting.

  As far as I know there is absolutely nothing on E:, I didn't even know that there was an additional drive. Right now I have it turned off so that I can use my computer. It seems to work fine without it. I read an article that said that if I can't fix e: with chkdsk which I have to do a low-level format of the reader? What's my next step? And I can do without the XP disc?

  The syntax

  fsutil dirty query e:

  is correct (except, of course, you try to use from the Recovery Console, where the fsutil command is not available).  Are you logged on as a user with administrative rights when you use fsutil?

  Similarly, the switches /f and/x are not available for chkdsk in the Recovery Console.

  See Recovery Console controls.

  Click on desktop then right-click on E: drive icon and select Properties.  What is indicated for:

  • File system
  • Space used
  • Free space
  • Capacity

  Now double click the icon for E: are shown files?  If not, click Tools > Folder Options > view and select the radio button "Show hidden files and folders" and uncheck "Hide protected files (recommended) operating system.  Now that you see all the files?

  Everything you read 'low level of shaped' is nonsense.  Any modern PC drive cannot be low level formatted by end users.  You can read this, but there is really no necessary even to "zero fill" your drive E: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=203931 (I have not checked to see if the WD tools rescuer has similar characteristics to SeaTools for DOS).

  If you are convinced that there is nothing of value on E (for example, installation of backup or restore), you can either format by right-clicking on the drive icon in my computer and selecting "format" or you can start disk management as described previously and use either in electronic format or delete the partition completely.  If you delete the partition, space becomes "unallocated".

  Because I guess C is your system drive (where Windows is), you may be able to use the diskpart tool to extend the partition F to use the unallocated space left if you decide to remove E well it's much easier (and safer) to do with disk management third-party tools such as Easeus Partition Manager free : http://www.partition-tool.com/personal.htm

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• jQuery not made on the secure page

  I have a jquery function in a payment page to switch between two different web forms (paid by check) and pay by credit card.

  It works fine on the page that is not secure...

  Marine girls choir | Payment for the new singer

  But does not work on the secure page...

  Marine girls choir | Payment for the new singer

  Any ideas what is happening here?

  .. .and then you will probably need to add ;return false; to the JS to keep the link jumping to the top of the page. So:

  showonlyone('newboxes1');return false;">

• I am unable to change the links page of the site and unable to see the file manager

  I have my site earlier designed by a guy, now he is not in contact, but I am unable to change the links page of the site and unable to see the file manager, even if I opened a session in Panel. admin help, please

  catalyst for business he did

  Did you get the site built through Muse?

  If this is the case then under settings, there will be an option to enable editing for content you will need to check.

  If this isn't the case, then the person who built the site you put authorized role which has no access to certain things, you can see that if you can go into the settings and roles and change it OR contact this person to give access you.

• Unable to anchor the navigation 'pages' or 'bookmarks' Panel in acrobat v9.5.1

  Hi all

  I'm unable to anchor the navigation 'pages' or 'bookmarks' Panel in acrobat v9.5.1.  The 'signatures' navigation pane is docked but not the other two panels.  I tried to repair Acrobat, re-boot of my 64-bit Windows 7 system and the problem persists.  It worked very well upward until April 2012.

  Try view > Navigation panels > reset panels

• Unable to show the details of audit of page html/OPS in the tables in the access to the tracking page. Technology of OFA stack does not come in the tables.

  Hello

  I activated followed Access Page follow the details of the verification of the users who have accessed HTML pages Web OFA as clients/suppliers, etc. in active Instance.I the profile option JTF_PF_MASTER_ENABLED to true to the level site and other configurations.

  But I can't get the Web pages of the OAF/HTML details AC two front and back end tables after execution of the Page access Tracking Data Migration Program.

  I am able to see the single FORM and VERIFICATION Tech batteries and unable to see the OFA technology stack.

  Help us please how do I get the Audit details OFA pages and what should I do?

  But in the Instance of Vision with the same configuration, I'm able to view the audit details OFA/HTML pages of front end and back end tables. In this case, I am able to view the OAF Tech stack.

  Could you let me know what is missing in the extraction of the OAF technology stack front end as well as put an end to the rear when I tried getting a test?

  Thank you

  Aren

  What is the value that is defined for the profile option, "JTF_PF_ENABLED" where the tracking does not work?

  Thank you

• Only show the first page of the chapters and expandable pages

  I just downloaded a book and its showing only the first page of a large number of chapters. When I arrived at the end of the first chapter (if it is still in the right order) he repeated the same page several times. From there, the next 4 chapters were only the first page of each chapter. Is it possible to fix this? What is the cause? I closed iBooks repeatedly, I restarted my phone several times, whenever it is the same.

  Have you tried to delete the book and it redownloading via the bought? If it's that the same are all recent comments mentioning the same problem? If it's a recent purchase, you could contact iTunes Support: http://reportaproblem.apple.com

• I want a fax confirmation showing the first page of the fax

  When I have something fax above, I get a fax confirmation indicating that the fax was sent.  I'm looking to capture the first page of the image with this fax confirmation.  I was able to do it on my other officejet pro 8600 all in one, but now I am unable to do it with this replaced machine which was covered by my warranty.

  Hi rubenm,

  I understand that you have a 8600 Officejet you wish to turn on the image for the fax confirmation report. I'd be happy to help you with this.

  I must say though, it was frisk me throughout this menu from the printer! What you need to do is:

  1. Press (right arrow) and then press Setup.

  2. press on the Fax Menu (can say Fax Setup)
  3. press on the reports of fax and then touch Fax of Confirmation.
  4. tap on (fax) or we (send and receive).
  5. press on the Fax Confirmation with the image.

  Then when you get a Fax Confirmation it should the page it should have this small image of the first page.

  Hope this helps, have a nice day!

• EventCombMT does not show the security logs

  When I run the EventCombMT it displays system and application logs for the servers of my business very well, but the security logs show gaps. No idea why?

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• C7280 connected wireless is unable to print the test page is in the queue.

  I managed to install my C7280 wireless for my laptop but I can't seem to get anything to acually impression of the laptop.  However, I CAN print from the pc.  Whenever I try to print from the laptop, things simply to sit in the queue.

  To sum up my network; I have a desktop (Vista) connected to a router.  A laptop computer (XP) and the C7280 are connected wireless to the router.  I installed the base driver HP update listed on the Web site on the laptop.  I can ping the printer from the laptop, so I know that the two are properly connected to the router.

  I checked the port on the laptop to the printer, and it is directed to the IP address.  Everything gets a static IP address on my router, so I don't know its correct.  I printed out a page of the network printer, and it is configured on the IP of the right.

  Any ideas?

  Message edited by gatorman on 09/22/2009 10:15

  Well I never needed to dig into the router or the security of the software on the laptop.  Once I got the driver installed and stable (and that was not easy), all that was needed was a fresh printer.  I have reset the default printer and wiped my previous network settings.  Once I have manually reconfigure the network settings on the printer again, he started just feel by far.  A little strange behavior since no settings have been changed.  Anyway, problem solved.  You should consider adding this step in your process walkthroughs.

  Thanks for all the help.

• Back to link documents button shows the security settings pane

  I have a PDF file with many links between documents (links to pages viewed in another PDF format in the same folder). When users have these configured to open in the same window, the planned actions occur: the source document closes (or seems to close) and the destination document opens to display the selected page. However, once that we password protect PDF files, there is a strange behavior. When the back button is used to go back to the source document, it brings back the user appropriately; However, if the user has their pane bookmarks open in the source document, the security settings pane is opened instead when the back is used.

  So, to summarize:

  -Connection of the cross-document doc source to destination doc, preferences set for the latter to open in the same window.

  -Source doc and doc of destination the two password protected.

  -Initial view of these two documents is Panel bookmarks and Page.

  -L' favorite user pane open in the doc from the source, click on the link between documents.

  -Closed source of doc, doc destination opens as you wish.

  -L' user press the 'back' button.

  -Close destination doc, doc source reopens at the appropriate location - but the Bookmarks pane is now replaced by the Security Panel.

  We would really like to find a way to avoid this; It is a pretty useless part for opening and the structure of these docs means that users will often view them with their bookmarks open. Is this a bug? Is there a setting that I can dig? We believe that this is not the case in Acrobat 9 (I can't confirm, but that's what my client says) but is happening in 10 and 11, as well as in the current version of the reader.

  Anyone can shed some light?

  Do not forget that you have here in the community of other end-users. Not the Acrobat team engineering.

  as far as I know - it is built in the behavior. Similar to default to display in the thumbnail pane pages on the navigation when a page "insert" is made.

  There is a certain logic to it, so it may have been deliberate. As an end user, I don't appreciate such. Some "assistance developer user staged" I can do without.

  You can consider an application via:

  Adobe - feature request/Bug Report Form

  Be well...

• Modal Plugin Page showing the blank Page.

  Hi all
  I use modal Skillbuilder page 2.0 4.2 APEX.
  Whenever I open the modal page, blank page opens.
  
  Can someone guide me what could be the problem.
  
  To open the modal page, I did the following steps.
  1 installed the Plugin 2.0
  2. from parent page, I created a button. Set the action to "defined by the dynamic Action. (I also tried to set the id of the button = "CREAT_BUTTON", a dynamic action with jQuery selector etc., as shown in the example video. "But this does not also).
  3 created dynamic action on click, mentioned the button and gave the path of the new page opens.
  4. change make up the Setup for the plugin and set the theme 1.

  Please see my earlier post-
  Your 'integrate in executives' is set to 'Deny', under Edit Application Properties-> security-> security of the browser.
  I put it on "Allow same origin".

  BTW, don't forget to mark the answer as correct!

• User is unable to change the home page when I put one in default mozilla.cfg

  I have this in mozilla.cfg:
  Pref ("browser.startup.homepage", "http://internal.intranet.tld");

  That of our intranet as a default home page. But it is not locked (I don't use lockPref()), so I want to allow a user to change the home page if he wants.

  But it does not work. Change the home page is not saved.

  Hi ohmer, you must use defaultPref() for the parameters that users should be able to change and have full control over - pref() allows to deviate from the default for the current session...