Unable to start my laptop

Similar Questions

• Unable to start my laptop due to c:\windows\system32\config\system

  Unable to start my laptop due to c:\windows\system32\config\system missing or damaged

  Hello

  ·        Remember to make changes to the system?

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start my laptop HP

  When I start my laptop HP pavilion Windows XP I get a black screen with a logo of HP and on the bottom of the screen says
  Press ESC to change boot order
  Press F10 to enter Setup, F12 to boot from LAN

  I tried to do, but nothing happens.
  The noise that makes the fan when I start the computer stops also after 5 seconds.

  Can someone help me please?
  Thanks in advance.

  When I start my laptop HP pavilion Windows XP I get a black screen with a logo of HP and on the bottom of the screen says
  Press ESC to change boot order
  Press F10 to enter Setup, F12 to boot from LAN

  I tried to do, but nothing happens.
  The noise that makes the fan when I start the computer stops also after 5 seconds.

  Can someone help me please?
  Thanks in advance.

  Hé msjr

  Try the xp repair forum in the link below

  It is a vista forum

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads?filter=answered

  Walter, the time zone traveller

• Unable to start my laptop Satellite U400

  Hi all

  After the installation of windows Vista Home Premium in my laptop Satellite U400 series and new partion Recovery created in what, I restarted my laptop and found no screen after the SCREEN TOSHIBA "LOGO". not even access the CD Rom drive, I tried all bootable drives.

  One! Kindly help me.
  The BIOS update will solve this problem?

  Thanks in advance.

  Hello

  You are able to access the BIOS?

  > The BIOS update will solve this problem?
  How you want to update the BIOS if you n t nothing appears on the screen?
  You'll have to start in windows to update the BIOS on this U400!

  Please connect an external monitor to the laptop and check if something wouldn't be visible on the external display!

• computer unable to start pavilion laptop g7

  My latop past "start windows" willnotget screen-it freezes more or less here.i tried each test [restore, recover, repair my computer] but iget nothing. It wont even let me initialize in the course tried modes.i all programs including the hp diagnostic program. can't even get it to start with a data or music cd. When t6he problem started he said he couldn't find a certain file HPPAVILLION boot

  Hi Drtonk,

  I understand that you have a problem with the laptop won't start not passed the Windows logo. You can follow this link to perform a hard reset

  Please note disconnect any external devices to devices such as USB, external displays storage devices and printers.

  You could try a System Restore when Windows 7 cannot start normally

  I hope this helps.

  Thank you.

• Unable to start my laptop Satellite Pro - orange flashing

  I can't boot my laptop Satellite Pro.
  I have an orange light flashes. I tried to remove the battery and hold the power button, but it did not work...

  Help

  I agree with Liam.
  The indicator flashes as a serious hardware problem was detected.
  What you could do is remove the RAM modules and test the device with the new test modules but I guess that is not RAM problem but something wrong with the motherboard.

• Unable to start my laptop Toshiba

  Basically, later yesterday my computer froze so I decided to plant it. I turned the computer back on but I can't actually back into the computer that I start, then a black page appears telling me that the computer could not initialize correctly.

  I am presented with several options. I can't get into Safe Mode or start Windows normally.
  However, Safe Mode does not work, I have a page with errors in all directions.

  When I try to start Windows normally Windows XP logo appears and everything seems normal, until a blue screen appears quickly and then goes almost immediately, then Im back to the original page that explains that the computer failed to boot normally.

  I need serious help. I'm only 17, and not a computer expert!

  Why you n t take a Toshiba recovery disc and reinstall the OS again?
  But the recovery procedure would format the whole HARD drive and you will lose the files stored on the HARD drive.

  But according to your message did not help to boot into windows XP
  To my eyes there so no other solution as a new OS install

• Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  \windows\system32\ntkrnlpa.exe file status: 0xc0000098

  Windows failed to load because the kernel is missing or currupt

  My computer did not come with an installation disc.  Best Buy has it

  I need my laptop, can anyone help.

  You download and make the disks to another computer.

  If you continue to have problems to take your machine to a repair shop.

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

• I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system.

  I tried to install windows vista on my laptop but I m unable to start because of a message error loading operating system. good quick response.

  Hello

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  See you soon.

• Satellite P15-S420: unable to start Windows XP

  I hope that all makes sense... I'm unable to start after the start page of Windows XP. I think I have assumed that the computer turn off when there is no. The battery may have exhausted and when I plugged it back in and tried to start it would not.

  When the Windows start page is in place, it seems that HD works for awhile, but stops and goes no further. I am able to boot in safe mode and have tried to restore with no effect. When I click on Toshiba Manager of power supply in the control panel I get "Policy of NoteBook Load Fail" this could be a problem.

  What do you think???
  Oh, I have a Satellite P15-S420.

  Hello

  In my opinion, this power saver error message occurs because you started the laptop in safe mode. In this case, the OS doesn't use the Toshiba drivers that are required for the use of additional applications.
  You write about the restore procedure. Have you tried to install the laptop with the supplied restore CD? If this isn't the case, then try it.

• ERROR: Unable to start Bluetooth stack service

  I seldome use features wireless to my pc before, but now that I have the wireless router I frequelty use it. Usually, I turn on the wireless switch and turned off to save the battery. I noticed every time I turn on the radio, after a few minutes, that an error message is displayed:

  BTTray

  ERROR: Unable to start Bluetooth stack service

  I don't know if what is wrong with my laptop. Please if anyone can tell me if what is wrong with this thing. Thank you very much!

  HP pavilion dv6820ee

  OS: Windows Vista editions Home premium.

  Message edited by xXxonins on 12/22/2008 05:27

  Access your product download page and reinstall the software for bluetooth under networks:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3716846 & lang = in

  then, under network connections in the network and sharing window - see if you have a bluetooth adapter that is listed.  If you do not use bluetooth, you can turn it off or you should be able to set it up properly.

  If fails it then in Control Panel, under administrative tools, Services - locate service BTtray and disable it.

  HTH

• Windows is unable to start.

  Owner of a Pavilion wa694ua #aba little more than 2 years.  Windows is unable to start.  During windows Startup Manager, I receive a status of: 0xc000000f and info: start the selection has failed because the required device is inaccessible.  What to do next?  I have the recovery disks, but is not no longer works.

  Your hard drive may have failed and must be replaced. Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive.

• Unable to start bluetooth stack service

  I can't not connact my phone to my laptop via bluetooth and get the following ERROR... UNABLE TO START BLUETOOTH STACK SERVICE.

  A large part of the obligation for any help.
  Thank you

  Hello

  Method 1.

  Try these steps and see if it works.
  Step 1: Start the Bluetooth service.
  a. Click Start, type services.msc and press to enter.
  b. in the list of components, double-click Bluetooth support Service.
  c. change the startup type to automatic and click on the Start button to start the service (verification of the d.       d.Dependencies of this service and make sure that they can also be programmed to automatic)
  e. click on apply and then click ok.

  Method 2: Bluetooth device driver update. Steps to update the device driver:

  a. click on start

  b. Select Control Panel

  c. Select system and maintenance

  d. click Device Manager (if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

  e. in the Device Manager, look for the Blue tooth device

  f. click on the driver tab, click Update driver

  Link for reference: updating a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

• Unable to start up normally, or any feature of safe mode

  I am unable to start up normally, and I'm unable to boot in safe mode functions.

  When it does not start normally, I get on the desktop with ICONS No. nor START BUTTON.

  I am operating Windows XP SP2 on a Dell Latitude D610 (Laptop).  "Cannot open Volume for Direct access.

  I need advice on that.  Help, please!

  We got a lot of insight.

  First, you need to get your work desk in order to have room for manoeuvre, then you can solve your problem of potential malware.

  What you describe is a situation where the process explorer.exe does not work (probably due to malware).  Think the explorer.exe process IS your desktop... then you must start it manually for now.  If it does not, you will have only wallpaper.

  Of your background image, press CTRL-ALT-DEL and open Task Manager.

  Look at the processes tab and if the process explorer.exe is not running, start it as follows:

  In Task Manager, click file, new task, and in the Open box, enter:

  %windir%\explorer.exe

  Click OK and see if get you your office.

  So if you are able to get into the Internet, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Restart and see what things look like.

  That alone cannot resolve, but if all goes well with the deleted malware, then PaulAuckNZ can help to mop up any problems.