Unable to submit my question to the community using iPhone
The subject says it all. Its weird, I remember that I was able to submit questions a few years ago.
There no shipment don't button if I use my iPhone 6 s more.
Thank you
Just tried it on iPhone 6 more using Safari - is there another browser you use?
Tags: iPhone
Similar Questions
-
A general question to the community
I have a general question to the forum community. I noticed that many contributors have more than 100,000 points. I'm a contributor forum for several years, I consider myself to be a casual user and offer contributions to daily or occasionally and then my answer is chosen as the solution. Not that it's really important to me because I love just to help others. However, unless a person is right in front of their computer constantly on the communities of Apple I for the life of me see how a person could possibly reach more than 100 000 points. Y at - it a secret that I don't know?
No, I think you worked which is the secret.
TT2
-
Question about the ports used by subdaemons
We use a direct access, no client server, with TT 6.0.4. TT is installed with port 16200. We see the subdaemons using ports such as
32814 timestensubd
timestensubd 32818
timestensubd 32820
32822 timestensubd
Is there anyway to configure which ports are in use? SE not in 6.0.4, and then in version 7.0.5 which we will use in the future?
Thank you
LindaI'm afraid that this isn't currently possible. There should be an improvement for this request.
Chris
-
How to remove the question from the community?
For some reason, one of my previous questions has been published twice, I was wondering how I might be able to delete one of them?
You can not remove them on your own. I will report to the second question and ask the hosts to remove.
-
ISE - unable to get SNMP information with the community
This is the output of the switch when clicking on a switch in authentications followed in ise interface
test2#sh snmp
Chassis: FOC1330W1K0
112 SNMP packets input
0 Bad SNMP version errors
4 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
44 Number of requested variables
0 Number of altered variables
44 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 Input queue packet drops (Maximum queue size 1000)
143 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
108 Response PDUs
35 Trap PDUs
SNMP global trap: enabled
SNMP logging: enabled
Logging to xxx.xxx.yyy.5.162, 0/10, 7 sent, 0 dropped. (admin/monitoring)
SNMP agent enabled
configuration of snmp:
snmp-server community snmp-com.public RO 33
access-list 3 permit xxx.xxx.kk.0 0.0.0.255
access-list 3 permit xxx.xxx.zz.0 0.0.0.255
access-list 3 permit xxx.xxx.yyy.0 0.0.0.255 (admin/monitoring)
The unknown community name keeps growing when I click on the name of interface switch in ise... any suggestions?
SNMP is configured for the switch added to ise with the name of Community law (v2c - snmp - com.public)
ISE ver 1.1.2.145
Thank you for your help
Currently, Yes, this is a limitation
'public' solves it. So my advice: 'public' set with an ACL restricting EHT nodes only.
-
Two questions for the community
Question #1:So I have a laptop ASUS. And whenever he wakes up from his sleep (back cover), the image appears, however, that I had to wait a few seconds before I can drag up from the lock screen (2-3 seconds). So I wonder what he's slowing down
Question #2:After the laptop awakens from his sleep, cmd.exe empty one/two pop-up windows or it seems to be empty since he came and close so quickly. So I was wondering what the cause.Notes:- Since it is an Asus laptop, there is the program "now we.
- I also Kaspersky Internet Security 2013, if it even matters
- I have 8 GB of ram
- I brought the laptop 3 months ago and don't have a windows reinstall a month before (using the function of resettlement in "PC settings"
Hello
I'm just guessing, but I think the delay is probably Kaspersky Internet Security 2013.
Displays the command prompt you see may be related to Kaspersky, commissioning, or possibly some drivers reload after sleep... Internet connection possible.
There may be also some Asus features back on.
What happened before the reinstall?
-
Question about the photo (using the folders and Photos app)
Hello
I am new on the app Photos - aperture used briefly but never really liked. I used to manage/sort all my photos with simple folders on the hard drive. Now, I would like to move the direction of the Photos app.
A few questions:
1.) if I add images, are they duplicated on my hard drive when I import them from Photos?
2.) how to delete images permanently? I need to do a cleanup, which is easier in the Photos. If I delete the images here (and also delete the "recently deleted" album), why they remain in their original on my hard drive folder?
Any help is appreciated - thanks!
1 - Yes by default which is highly recommended, as was the case with iPhoto you then delete the photo source since it is safe in the library
2 - pictures works just like iPhoto - nothing outside the library is not affected by what you do in the application - see 1
LN
-
Unable to see "Tags panel" under the Navigation using Acrobata 8 Standard Panel
Hello
Never work with adobe acrobat. However, now all PDFs must be 508 compliance. I've done a few tutorials and it seems simple, however, I'm unable to see the sign tags in the Navigation panel. I use Acrobata 8 and Windows XP. Any suggestion on why I can't see the tags panel.
Best regards
Bernd is correct.
Usiing version 8, you'll need Acrobat 8 Professional or Acrobat 3D version 8.
Be well...
-
Question about the connection using the "sqlplus / as sysdba.
Good afternoon
The command:
worked very well for the Oracle server. When I go to a client, it does not work even if I specify the correct instance. On the client, I can able to connect using one of these two commands:sqlplus / as sysdba
The question is: is the form "/ as sysdba" limited to used on the Oracle server and not available for customers?sqlplus.exe sys/abc123@"orahost.john.local:1521/dbca.john.local" as sysdba or sqlplus.exe sys/abc123@dbca as sysdba but not sqlplus / as sysdba or sqlplus /@dbca as sysdba
Thank you for your help,
John.is the form "/ as sysdba" limited to use on the Oracle Server
Yes
and not available for customers?
Yes
-
Question about the correct use of the WM_CONCAT
Hello
I am trying to accomplish the following:
from this
and ends on thisENAME ---------- ADAMS ALLEN BLAKE ...
Basically, alphabetically sort the characters within each name. I have an intermediate step that seems promisingOLD_NAME NEW_NAME ---------- -------- ADAMS AADMS ALLEN AELLN BLAKE ABEKL ...
Yields aboveselect e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos from emp e, (select rownum pos from emp) iter where iter.pos <= length(e.ename) order by e.ename, substr(e.ename, iter.pos, 1);
the characters are in the right sequence, I thought that all I had to do was to use WM_CONCAT (and replace the comma it inserts with an empty string) and I would like to make. I thought it would do: (replacement of commas left out for clarity)OLDNAME NEWCHARPOS ---------- -------------------- ADAMS A ADAMS A ADAMS D ADAMS M ADAMS S ALLEN A ALLEN E ALLEN L ALLEN L ALLEN N BLAKE A BLAKE B BLAKE E BLAKE K BLAKE L ...
but the sequence of the newcharpos is messed up in the process and, rather than the expected result, I get this:select oldname, wm_concat(newcharpos) newname from ( select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos from emp e, (select rownum pos from emp) iter where iter.pos <= length(e.ename) order by e.ename, substr(e.ename, iter.pos, 1) ) group by oldname;
My question is, how to structure the last query so that the order of character as calculated in the inner query stays?OLDNAME NEWNAME ---------- -------------------- ADAMS A,S,M,D,A ALLEN A,N,L,L,E BLAKE A,L,K,E,B ...
Thank you for your help,
John.Or
SQL> select oldname, wm_concat(newcharpos) keep (dense_rank last order by null) newname from ( select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos from emp e, (select rownum pos from emp) iter where iter.pos <= length(e.ename) order by e.ename, substr(e.ename, iter.pos, 1) ) group by oldname / OLDNAME NEWNAME ---------- ------------------------------ ADAMS A,A,D,M,S ALLEN A,E,L,L,N BLAKE A,B,E,K,L CLARK A,C,K,L,R FORD D,F,O,R JAMES A,E,J,M,S JONES E,J,N,O,S KING G,I,K,N MARTIN A,I,M,N,R,T MILLER E,I,L,L,M,R SCOTT C,O,S,T,T SMITH H,I,M,S,T TURNER E,N,R,R,T,U WARD A,D,R,W 14 rows selected.
Or (11 GR 2)
SQL> select ename oldname, column_value newname from emp, xmltable(('string-join(for $i in (' || rtrim(regexp_replace(ename, '(.)', '"\1",'),',') || ') order by $i return $i, "")')) / OLDNAME NEWNAME ---------- ------------------------------ SMITH HIMST ALLEN AELLN WARD ADRW JONES EJNOS MARTIN AIMNRT BLAKE ABEKL CLARK ACKLR SCOTT COSTT KING GIKN TURNER ENRRTU ADAMS AADMS JAMES AEJMS FORD DFOR MILLER EILLMR 14 rows selected.
-
HP7612: Unable to print double-sided of the ipad or iphone to HP 7612
Buy new HP 7612 large format printer and connected to the WiFi network at home. Discovered that I can print two-sided PC, but cannot print two-sided to devices on the same network (iPad and iPhone). Printing with printer device iOS is located and double faces and black only options are available. When I select print alone. When I select double-sided is it print the device but the printer does nothing. I wish I could print the iOS devices double-sided forms to save paper. Please notify.
Understand this myself. Had to go to printing on the screen of the printer and update the software of the printer. Printer downloaded the new software and rebooted and one that he reconnected to the network that I could print in double face of ipad and iphone.
-
Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0
I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:
"CVI 9.0 and MSVC 2008 express.
The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details. But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well. Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense. I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows. Or does change with the release of MSVC 2008 Express?
There is no hurry to answer...
JB
If you have a CVI 9.0 FDS(I'm not sure about the BDS)
Select Options/Build Options
Select the Select button to the right of 'compiler active'.
Click 'new' to create a new configuration of external compiler
Select MSVC 9.0 as a model.
Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).
Click OK
After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.
Kind regards
Nicolas
-
My computer has suddenly decided to stop loading programs. As it happened, my mouse in the right hand by clicking the ability disappeared. The toolbar at the top of the screen works differently and will not help load, the dropdown under FILE no longer exists, the drop-down list under TOOLS decreased by only 2 items, (POP UP BLOCKER AND SMART SCREEN FILTER) and INTERNET OPTIONS no longer appears. The internet is a mess, especially with whatever it is when dealing with photos. I used to be able to click on many photos and expand in doing so. No longer. I used to be able to right click on a photo that has produced a menu drop down includes SAVE AS but no more. If I can get a web page to the top at all, it cannot be browsed. Although the web page shows "life" nothing cannot be engaged on the screen by clicking on its characteristics. Earlier this week, I could load games like SOLITAIRE, but even the game features were incomplete. That game normally has some features TIP link in the upper left of the page of the game but who went and now it will not load even upward. One of the last messages that I had was the one who said, "AN ERROR IS PREVENTING the STARTING PHOTO GALLERY VIEWER WINOWS." A message that I had before I told him, ' COULD NOT CREATE THE SCHEDULED TASK for THE FOLLOWING REASON: THE REQUEST IS NOT supported 0 X 80070032.» I recently tried to load OPEN OFFICE.ORG and it could not load the displayed computer ERROR 1935. He also says, "HRESULT 0 X 80070091". I don't think that I will be able to access the Microsoft Forum for any answers that might come my way so I would be VERY VERY happy if someone could answer my e-mail address that, for now, still works: * e-mail address is removed from the privacy *. Thank you for taking the time. Best regards, CharlieChanFan
Hi CharlieChanFan,1. from when are you facing this problem?
2. any recent change in software/hardware on your computer?
3. What is the full error message about solitaire game?Scenario 1: Operating system won't load does not have the following features.a. toolbar running differently (do not load file menu, the Help window, tools)
b. games such as Solitaire features do not appearTo resolve this issue I suggest you to follow these methods provided below.Method 1:Try the SFC scan on the computer.Reference:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833See also:How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Method 2: Try to solve this problem with boot.See the following Microsoft KB article:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Scenario 2: Troubleshooting problem of Internet explorer.Step 1: I suggest to perform an optimization of Internet Explorer on your computer and find the number.
How to optimize Internet Explorer
http://support.Microsoft.com/default.aspx/KB/936213
Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settingsStep 2: Visit it below mentioned link and follow the instructions to solve the problem of Internet Explorer:Tips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-ExplorerScenario 3: To solve the problem of the Windows Photo Gallery, I suggest you follow the steps inScenario 1.Scenario 4: Error code 80070091 means "the directory is not empty.I suggest to run the application as administrator and check for the issue.a. right-click right the program and select Properties
b. on the Compatibility tab, select run this program as an administrator
c. click on apply and OKNote: If none of these methods provided and steps resolve the issue, then I suggest to create a new user account, try to fix the damaged user account and control the issuance.For this you need to follow the link below.Create a user accountFollow the link provided below to fix the damaged user profile.Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileIf the problem persists then I recommend you to run online Virus Scan to remove any infections, as appropriate.
Follow the link below to start the free online scan:
http://OneCare.live.com/site/en-us/default.htm
Also, follow this link below:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Newbie question: estimate the effort using gen?
Hello! I'm new to Robohelp; much more familiar with Doc-to-Help!
If I have an existing Word document (say 100 pages), which is the process and the effort required to apply a Robohelp template and adjust if necessary to generate Webhelp based?
1. apply the model
2. update the styles of the content, if necessary
3. generating help
4. any other thing?
Any estimate or guidance will be greatly appreciated!
Thank you!
K
Kathy
Yes, both versions can produce webhelp but HR HTML allows you to present the things you can't do in HR for Word. See Twisties on my site for example.
You will also better get HTML HTML HR who, while you are a beginner can bother you, it will probably be later.
Another reason to go with HR HTML is that it is more popular and better supported in these forums. If you hit a problem with HR for Word, you can not get responses too these days.
Now let's look at your work scenario. As Colum as said, you can generate a printed document HR HTML for your small business. Any document that you give them, you do not want to import. Instead you're going to make the changes yourself then what version you use becomes academic.
Output print suggests not HR for Word. See the section on my site about printed Documentation. Which is written for RH HTML and yet once again, control is better, yes the better.
Given your knowledge of Word, I understand your desire to remain in his comfort zone. I was even initially but Rick Stone (Robowizard on these forums) have convinced me that this was not the best way. Of course, you're in for a few sorrows, but everyone here will help you. With some effort on your part, it is not so difficult that you probably fear.
-
Hi all
I have a question for the community? We had the following API libraries in JavaFX 1.2.x and 1.3.x:
However, since the creation of JavaFX 2.x.x that we do not seem these libraries, have we lost now this featureimport javafx.io.http.HttpRequest; import javafx.data.pull.PullParser; import javafx.data.xml.QName;
get the RSS feeds through JavaFX natively? It doesn't seem to be any documentation / tutorials on this subject since the
release of JavaFX 2.x.x I can find Google search? If there is another mechanism on how to do it now I would be grateful
some tips or advice on how to approach this topic.
Kind regardsHello. We do not have this feature more in javafx2.0. Instead, in javafx 2.0, you can use the java REST API.
You can do an HTTP (get, post, put, delete) using this API.
Maybe you are looking for
-
applications on the iphone 4s are not transferred to pc
I am trying to transfer all my purchased apps from my Iphone 4s to my PC via Itunes by selecting the file and this thing and then "transfer purchases from Iphone" but his does not work How this issue Solver. Please someone help me I want to spend at
-
I imported the images into the pictures and they are clearly there when I go into the photos, but when I go into an email and select last import of files th does not appear also I can not select the photo that I have to join - it's as it is not updat
-
iPhone does not backup on iCloud despite the library on
My iPhone is not backup, despite the option is on. He used to work very well with my iPhone 6 and Macboo pro. Now when I get the pictures on my laptop I don't see the new photos.
-
Button / stop does not not how to start my mobile
Hello I have the Motorola Milestone A853. I use the GSM of Auntie DOCOMO network. This is the second time I had a problem with the power/unlock button. (Last time I replaced him in the warranty is always there until December) Last night my phone batt
-
LaserJet M604: M604 connection series
The HP LaserJet M604 is possible to work on a network that sends jobs through connections series? How? I have connected via ethernet cable to the box of series without success. I bought a USB dongle to series, which the printer immediately asking