Newbie question: estimate the effort using gen?

Similar Questions

• Sound weird distortion on Export - Newbie question not the Compression

  I'm trying the demo Flash CS3 - OSX. (Using OS x 10.4.10.)
  
  I have a timeline a bit complicated with about 8 layers and some alpha fading things and out and a lot of sound samples used as sound effects timeline (forget the term, but attached to the frames don't not streaming). No script writing.
  
  The sounds are too long most for the amount of time allotted to them in the timeline and cut the previous sounds. I speculate that this could be a possible problem. In other words, I said 5 second sound, which has only 3 seconds of time to play, before another sound, he interrupts in the same layer of the timeline.
  
  There are two distinct layers of the sound at the same time.
  
  All original sounds are imported into the film as erroneous 44.1/16 bits. What are mono files (could be another possible problem).
  
  I'm trying to export with 128 k MP3 quality. I tried different variations:
  
  -the compression setting for audio files in the library/setting film export settings to use the settings of the library
  
  -definition of the audio files in the library to use 'default compression' and specifying the correct setting of MP3 128 k in the export settings
  
  - or both of them (individually defined in the library and then overridden in export settings).
  
  I tried with and without the 'single use' parameter (both in the library files and export settings). (This is a question for me: what should be set properly so that when the original file is already mono?)
  
  Sometimes, everything is great. I have test or export the movie and the sound is fine.
  
  Other times I test or export the movie - with exactly the same audio as the last time when it worked - and now get a hissing/cracking sound unbearably ugly instead of the correct sound.
  
  More dangerously - I think but did not quite convince myself - the same export flash file can sometimes play end and sometimes play with the distortion. So I'm not sure if it's a question of export, Flash player problem or combination of export do something semi-bizarre that the player sometimes only chokes on. A 'bad' export is distorted in the desktop Flash Player that comes with the Flash demo, both in a browser with the Flash 9 r45 (OSX) plugin.
  
  
  GUH!
  
  What is the product of $800 which is little more than a Basic for the script text editor and an animation timeline that did not feature update since 1999.

  For someone else to do this...

  It is looking like it is a bug of Flash CS3 app.

  The app is intermittently lose range of the sound/document library settings or just chokes sometimes MP3 Converter trying to convert AIFF to MP3 files on the export of the film.

  Fortunately, it looks like once a .swf movie is exported, it will be distorted or not and is not a problem of random play or player.

  So you can just export several times until you get a 'good' (!).

  I've only got with export MP3 128 k, never with 64 k MP3 to export. For 128K, it seems that fiddling with the sound settings before trying to export can prevent distortion. My best results seem to be:

  -all the wrong in the library, the value 'default - compression.

  -Publish settings of ' event Audio: MP3, 128kpbs, Mono; Substitute uncontrolled sound settings

• Question about the ports used by subdaemons

  We use a direct access, no client server, with TT 6.0.4. TT is installed with port 16200. We see the subdaemons using ports such as
  
  32814 timestensubd
  timestensubd 32818
  timestensubd 32820
  32822 timestensubd
  
  Is there anyway to configure which ports are in use? SE not in 6.0.4, and then in version 7.0.5 which we will use in the future?
  
  Thank you
  Linda

  I'm afraid that this isn't currently possible. There should be an improvement for this request.

  Chris

• Newbie Question on the use of the size of a table in a schema

  Hi all,
  
  Newbie Alert!
  
  I tried to work on the size of a table in a schema and struggled to get the exact number. Could someone help me please with getting an exact figure.
  
  Thanks to all who responded!

  SELECT sum (blocks) * db_block_size/1024 MB of dba_extents
  where owner = SCHEMA_OWNER and nom_segment = TABLE_NAME;

  http://Waqas-DBA.blogspot.com

• Unable to submit my question to the community using iPhone

  The subject says it all. Its weird, I remember that I was able to submit questions a few years ago.

  There no shipment don't button if I use my iPhone 6 s more.

  Thank you

  Just tried it on iPhone 6 more using Safari - is there another browser you use?

• Question about the photo (using the folders and Photos app)

  Hello

  I am new on the app Photos - aperture used briefly but never really liked. I used to manage/sort all my photos with simple folders on the hard drive. Now, I would like to move the direction of the Photos app.

  A few questions:

  1.) if I add images, are they duplicated on my hard drive when I import them from Photos?

  2.) how to delete images permanently? I need to do a cleanup, which is easier in the Photos. If I delete the images here (and also delete the "recently deleted" album), why they remain in their original on my hard drive folder?

  Any help is appreciated - thanks!

  1 - Yes by default which is highly recommended, as was the case with iPhoto you then delete the photo source since it is safe in the library

  2 - pictures works just like iPhoto - nothing outside the library is not affected by what you do in the application - see 1

  LN

• Newbe question about the network configuration of ESXi 3.5

  I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

  I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

  My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

  X vmnic0 embeeded nic1

  NIC2 integrated vmnic1 used by vswitch1

  I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

  Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

  vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

  Haven't you set up this? If this isn't the case, I would get with one who did.

  Order "the great vSwitch debate" parts 1 and 2 to start.

  http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

• Newbie question for the Oracle application server

  Hi Master,
  a DBA I am interesting to broaden my skill with learning on the application server.
  I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
  Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
  
  Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
  WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
  
  Please enlighten me and thank you for your help
  
  Lie

  Question if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?

  Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.

  What book other than the documentation that you have found the right one for learning.

  Yet to find one, Oracle documentation was OK.

  Is it better to learn the Linux or Windows version?

  Both are very well, choose the operating system you know better.

  Best regards

  mseberg

  I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.

  Beware of pre-installation tasks

  Install the Oracle database
  Linux RCU (repository creation utility)

  Database

  Use an existing database. (And it worked)

  My test was divided into four main parts: (in this order)

  Installation of the regional coordination unit
  WebLogic Server Install
  Install JRocket
  Forms and reports Install

  According to me, it took me two or three times to do things. (or at least work)

  I found myself with these URLs in the end:

  Administration Server Console http://Host/console 7001
  Enterprise Manager Console http://Host/em 7002
  Enterprise Manager Agent http://Host/emd/main
  Oracle Forms http://Host/formes/frmservlet 9001
  Oracle reports http://Host/rapports/rwservlet 9002

  So far, I have only an addition to my Web Page:

  http://www.Visi.com/~mseberg/compile_forms_on_wl.html

  As always this work orders:

  ./opmnctl status
  

  I was able to add PHP after you apply the hotfix 9292625.

  Note of Oracle that I found useful

  854117.1

  Published by: mseberg on May 20, 2011 14:16

• Question about the connection using the "sqlplus / as sysdba.

  Good afternoon
  
  The command:
  

  sqlplus / as sysdba

  worked very well for the Oracle server. When I go to a client, it does not work even if I specify the correct instance. On the client, I can able to connect using one of these two commands:
  

  sqlplus.exe sys/abc123@"orahost.john.local:1521/dbca.john.local" as sysdba
  
  or 
  
  sqlplus.exe sys/abc123@dbca as sysdba
  
  but not
  
  sqlplus / as sysdba
  
  or 
  
  sqlplus /@dbca as sysdba

  The question is: is the form "/ as sysdba" limited to used on the Oracle server and not available for customers?
  
  Thank you for your help,
  
  John.

  is the form "/ as sysdba" limited to use on the Oracle Server

  Yes

  and not available for customers?

  Yes

• Newbie question; Rewind the command?

  What command should I enter to go back to the first picture on "stop" in a setting / enter a certain slice of the sequence?
  This is my first time using Flash, and I'm working on a double menu (menu second has a "Close" button where I want to go back to the first menu).
  
  I'm quite new to the Please keep it as simple as possible ;)
  And thanks to all those who give their time to help this poor fool!
  
  __Edit: _
  And another question:
  If you know of any good NOOB Actionscript-sites that keep things simple, please post a link! ActionScripting for Dummies or something... Thanks a bunch!

  the general approach is to use: gotoAndStop (#);

  where # is a number of image or label image in quotes.

  You might want to look at www.lynda.com

• Simple (hopefully) newbie question on the Export model

  Entirely new to ODM - so please be gentle! - and you would really appreciate to help smart people.
  
  We use ODM (10 g) to make some predictive analytics (SVM). The question I have is:
  
  Once a model is 'built' and trained on historical data, can model that be exported to and used in another environment (external) Oracle (assuming of course that the data columns are equivalent)?
  
  Can you tell me if the model is exported as an ODM object - and so would require an instance of the ODM to the outside environment. Or, if it is exportable in the form of, say, a table of coefficients that may simply be questioned outside without needing an instance of ODM.
  
  I hope it's a clear explanation of what I'm trying to get to. thanks in advance.

  Hello
  Yes, you can export/import a model from an Oracle database to a different Oracle DB using the pl/sql API, documented in the doc PL/SQL Packages and Types.
  DBMS_DATA_MINING. EXPORT_MODEL
  DBMS_DATA_MINING. IMPORT_MODEL
  If you build a SVM model using the linear option, you can extract the coefficients in table form and import them into an Oracle database in some mid-layer service or not.
  Thank you, Mark

• Question about the correct use of the WM_CONCAT

  Hello
  
  I am trying to accomplish the following:
  
  from this
  

       ENAME
       ----------
       ADAMS
       ALLEN
       BLAKE
  ...

  and ends on this
  

       OLD_NAME   NEW_NAME
       ---------- --------
       ADAMS      AADMS
       ALLEN      AELLN
       BLAKE      ABEKL
  ...

  Basically, alphabetically sort the characters within each name. I have an intermediate step that seems promising
  

  select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
    from emp e,
         (select rownum pos from emp) iter
   where iter.pos <= length(e.ename)
   order by e.ename, substr(e.ename, iter.pos, 1);

  Yields above
  

  OLDNAME    NEWCHARPOS
  ---------- --------------------
  ADAMS      A
  ADAMS      A
  ADAMS      D
  ADAMS      M
  ADAMS      S
  ALLEN      A
  ALLEN      E
  ALLEN      L
  ALLEN      L
  ALLEN      N
  BLAKE      A
  BLAKE      B
  BLAKE      E
  BLAKE      K
  BLAKE      L
  ...

  the characters are in the right sequence, I thought that all I had to do was to use WM_CONCAT (and replace the comma it inserts with an empty string) and I would like to make. I thought it would do: (replacement of commas left out for clarity)
  

  select oldname,
         wm_concat(newcharpos) newname
    from (
          select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
            from emp e,
                 (select rownum pos from emp) iter
           where iter.pos <= length(e.ename)
           order by e.ename, substr(e.ename, iter.pos, 1)
         )
    group by oldname;

  but the sequence of the newcharpos is messed up in the process and, rather than the expected result, I get this:
  

  OLDNAME    NEWNAME
  ---------- --------------------
  ADAMS      A,S,M,D,A
  ALLEN      A,N,L,L,E
  BLAKE      A,L,K,E,B
  ...

  My question is, how to structure the last query so that the order of character as calculated in the inner query stays?
  
  Thank you for your help,
  
  John.

  Or

  SQL> select   oldname,
         wm_concat(newcharpos) keep (dense_rank last order by null)  newname
    from (
          select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
            from emp e,
                 (select rownum pos from emp) iter
           where iter.pos <= length(e.ename)
           order by e.ename, substr(e.ename, iter.pos, 1)
         )
    group by oldname
  /
  OLDNAME    NEWNAME
  ---------- ------------------------------
  ADAMS      A,A,D,M,S
  ALLEN      A,E,L,L,N
  BLAKE      A,B,E,K,L
  CLARK      A,C,K,L,R
  FORD       D,F,O,R
  JAMES      A,E,J,M,S
  JONES      E,J,N,O,S
  KING       G,I,K,N
  MARTIN     A,I,M,N,R,T
  MILLER     E,I,L,L,M,R
  SCOTT      C,O,S,T,T
  SMITH      H,I,M,S,T
  TURNER     E,N,R,R,T,U
  WARD       A,D,R,W                       
  
  14 rows selected.
  

  Or (11 GR 2)

  SQL> select ename oldname, column_value newname
    from emp,
         xmltable(('string-join(for $i in (' || rtrim(regexp_replace(ename, '(.)', '"\1",'),',') || ') order by $i return $i, "")'))
  /
  OLDNAME    NEWNAME
  ---------- ------------------------------
  SMITH      HIMST
  ALLEN      AELLN
  WARD       ADRW
  JONES      EJNOS
  MARTIN     AIMNRT
  BLAKE      ABEKL
  CLARK      ACKLR
  SCOTT      COSTT
  KING       GIKN
  TURNER     ENRRTU
  ADAMS      AADMS
  JAMES      AEJMS
  FORD       DFOR
  MILLER     EILLMR                        
  
  14 rows selected.
  

• Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

  I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

  "CVI 9.0 and MSVC 2008 express.

  The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

  There is no hurry to answer...

  JB

  If you have a CVI 9.0 FDS(I'm not sure about the BDS)

  Select Options/Build Options

  Select the Select button to the right of 'compiler active'.

  Click 'new' to create a new configuration of external compiler

  Select MSVC 9.0 as a model.

  Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

  Click OK

  After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

  Kind regards

  Nicolas

• Newbie question: list the Configuration of virtual machines and data warehouses

  Hello

  I'm new on using powercli how to list all virtual machines in a certain data center, their memory, Procs and what data warehouses they are on.

  I know you can use get - vm | Select-object name, NumCPU MemoryMB but if I add DatastoreIdList as well, it doesn't seem to work.  What Miss me

  Thank you very much

  Laurence

  That's right, you could do

  Get-VM MyVM | Select Name,@{N="DS";E={[string]::join(',',($_.datastoreidlist|%{(Get-View -Id $_).Name}))}},Description |
      Export-Csv "C:\test.csv" -NoTypeInformation -UseCulture
  

  Just look at whether the separator for CSV is be a comma in your culture, you probably need to adjust the separator in the Join method!

• Newbie question: place the Illustrator .eps or .ai file in InDesign

  I have an Illustrator file contains text that has been converted to outline text.  When I placed .ai or .eps version of the file in a new InDesign document, the text is composed of pixel blocks that make it not only unsightly but also illegible. My goal is to place that looks like it is in Illustrator and is resizable as vector.  This is my first shot using InDesign so I don't know that I do something wrong, I just don't know what.  I'd appreciate any help.  Thank you!

  You did nothing wrong; not sure that ID displays previews low-resolution images. You can view previews full resolution images placed by going to view-> display performance-> display high quality, or you can right-click on any one image and set its resolution of preview in its own menu of display performance, just that a placed image.