uncaugh:IllegalArgumentException When I pop a Popupscreen custom?

Similar Questions

• When a pop-up window opens in a new tab, do NOT pass it immediately

  Hello.
  I changed the value of browser.link.open_newwindow.restriction from 2 to 0. Now pop-ups will open in a new tab instead of new window, which is cool.
  But still firefox goes immediately to the ToolTip that gets opened in a new tab.
  I want to have firefox in a way that, when a pop-up window is opened in a new tab, do NOT pass it immediately.

  Note: The option "when I open a link in a new tab, switch to it immediately" in the menu Options-> tabs, is already disabled.

  Try to set the pref browser.tabs.loadDivertedInBackground to true on the topic: config page.

  • http://KB.mozillazine.org/about:config

• When it pops up in my comp. Skype contact is online, does that mean he's talking on Skype?

  When it pops up in my computer as a Skype contact is online, does mean that the person talking on Skype or the person is just in the internet?

  N ° it simply means that it is online and may be engaged in conversation.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• How can I get Firefox to display the information bar when a pop-up is blocked

  I clicked on "don't show this message when pop-ups are blocked" when a popup has been blocked. How can I get this message to reappear again when a pop-up is blocked?

  I find generally pop ups boring, but sometimes they are needed to use some Web sites correctly. Now I can not get the information bar to return when a pop-up is blocked. How can I get that back?

  Operating system

  Windows XP

  You can see a pop-up block icon in the right corner of the status bar if you have chosen to hide the information bar at the top.
  You can click on this icon of pop - up block on the status bar and remove the check mark from «do not show an information message when pop-ups are blocked»

  You can watch these prefs the topic: config page and reset them using the context menu:
  Status bar icon: browser.popups.showPopupBlocker
  The InfoBar at the top: privacy.popups.showBrowserMessage

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• Why this site did charge my account with two renewals auto when I'm not a customer

  Why did take 2 automatic renewals annual my account when I am not a customer

  What site? If you're referring to MS Answers, you're wrong. This site is totally free. Maybe your credit/identity card information was stolen as a result of malware on your computer...

• WebService response is null in the code, but when I check in the customer REMAINS at this moment where I get the response ok

  Hi all

  Today, I try to call post webservice at this point, I get an answer anywhere via the webservice code I mentioned below, but when I try via the customer REMAINS this time that I get the right answer, so let me know what the problem?

  WebService code: -.

  QString ApplicationUI::postByWebUrl(QString qStrUrl, NetworkMethod method, QVariant data)
  {
      QNetworkRequest request = QNetworkRequest();
  
      QNetworkAccessManager *networkAccessManager = new QNetworkAccessManager(this);
      QNetworkReply* reply;
      QString qStrReply;
      request.setUrl(QUrl(qStrUrl));
      request.setRawHeader("Content-Type", "application/x-www-form-urlencoded");
      request.setRawHeader("Accept", "application/json");
      QByteArray *byteArray = new QByteArray();
  
      JsonDataAccess jda;
      jda.saveToBuffer(data, byteArray);
      QBuffer buffer(byteArray);
      buffer.open(QIODevice::ReadOnly);
      QEventLoop loop;
      reply = networkAccessManager->post(request, QString(buffer.readAll()).toAscii());
      connect(reply, SIGNAL(finished()), &loop, SLOT(quit()));
      loop.exit();
      if (!loop.isRunning()) {
          loop.exec();
      }
  
      qStrReply = reply->readAll();
      delete (byteArray);
      buffer.deleteLater();
  
      reply->deleteLater();
      networkAccessManager->deleteLater();
      return qStrReply;
  }
  

  I'm waiting for your positive response.

  There are a number of problems with the code you have posted.  Take a look at this class, which accesses a REST web service and issues the response as a signal.  ForumRequest.cpp

• Need for a method to be called when the pop-up screen

  Hello

  I have a requirement in my application. I have a screen from which I'm moving to screen B. When I Pop the screen B, I need a method that must be called in the screen has. Looks same as onActivityResult() in Android.

  I am currently using onExpose(). But this method is called for all in the screen has. In the menu click or button also. Is there another way to do this?

  Help, please...

  You have two options I can think immediately, which do not have to change anything in screen B.

  (1) use pushModal when you call B screen.  The statement immediately after the pushModal will be executed as soon as B screen is popped.  In general, I try to avoid the modal screens, but in this case, it's probably what I would do.

  (2) set an indicator immediately before you tap screen B.  Test the flag in onExposed().  If the flag is not set, then the onExposed was called for another reason and you can ignore it.  If the flag is set, then turn him off and process you want, knowing that the screen that has been exposed as screen B jumped.

  Either should work for you.

• '400 bad Request nginx/0.8.55' appears when I'm on E - bay. What it means. It seams to slow down my computer when it pops up.

  This appears when I'm on E - bay.  What it means.  It seams to slow down my computer when it pops up.  How can I fix it.

  Thank you
  Bill

  Hello

  1. is this problem limited to the ebay site?

  2 have you made changes on the computer before this problem?

  3. What is the error message or an exact error code?

  4. what version of Internet Explorer is installed on your computer?

  If you are facing this problem while browsing with Internet Explorer, then I suggest you to try the steps in the following Microsoft article and check if this may help.

  Can't access some Web sites in Internet Explorer:

  http://support.Microsoft.com/kb/967897

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope the information is useful.

• When I click on Define Custom Shape, I get an error message: "could not complete your request because of a program error."

  I use Photoshop CC 2014. When I click on Define Custom shape, there is an error box that says: "could not complete your request because of a program error."  How can I fix it or work around it? I have looked on the internet for answers, but could not find any solution to this. The custom shape tool is 99% of what I use!

  Well, now it works. It was a particular path that generated the message. Other forms custom records.

• When the Manager of the custom function in a configuration of link file gets error?

  The question she get error when the Manager of the custom function in a config file in the plan to include the link.
  When she went to join the custom function Manager in the debugger, everything is OK.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < configuration >
  < custom function platform = "DotNet".
  library-path="G:\RB1\Include\CustomFunctions.dll".
  Class="Viking.CustomFunctions.CustomFunctions"/ >
  < / configuration >
  
  THS, category and path is correct.
  So is there any problem for < custom function platform = "DotNet"?
  
  OPA version 10.2
  
  OPA error message translated from the Germany into English: Exception has been thrown by the target of a call

  In general, you should not give the full path of the custom function, it should be rather in relation to the project include file.

  for example:
  

  and then make sure that the CustomFunctions.dll file is copied into the project folder until the project is built.

  In addition, if you use 10.2 for a new project, the mechanism that you use is now replaced. An extension of the custom function is the new thing, and it will look much nicer when it is used in the rules. Refer to the section 'Write a Custom function Extension' in aid of developer for more information.

• How to find and pop a screen custom battery Global display

  I pushed a form customized to a global stack by using pushGlobalScreen, when a call disconnected.

  is it possible to control this form exists in the Global display stack and how I pop this screen?

  No, you need a reference to the screen

• Online games, when they pop up, they are so small, you can barely see them. I just downloaded Win 7. And I tried to adjust the themes Aero back to basics. But it does not work. any ideas?

  Yet once, when I go to online games and most of those who pop up a new window, the game is so small, that I can barely see it. How to fix this. Tried to compensate for the Aero themes, but it does not work. What I missed... Any ideas how to change these sizes?

  Hi MaureenAnn,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your issue, please provide additional information;

  1. What is the game you are trying to play?
  2. Faced with this problem while playing games?
  3. It works correctly when you play a game stored on a computer?
  4. Was there any recent changes/updates / drivers installed on your computer?

  If you are facing this problem, only with online games, suggest to enlarge the page by clicking on the icon zoom on the lower right of the browser.

  Allows you to change the screen resolution by clicking Customize desktop by right-clicking on the desktop.

  In addition, we suggest you to optimize internet Explorer and check if it solves your problem. To optimize internet Explorer, I suggest you visit the below mentioned link.

  http://support.Microsoft.com/kb/936213/

  I hope this helps solve your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Why a strange menu appears when I pop a screen

  After I pop a screen (the one that allows users to add a contact pre-populated from my code) a small menu will appear which has the following menuitems: save the contact (my addition), hide the keyboard, Application Switch, full Menu.  Contact 'save' is my addition to the menu of the screen being burst.

  This strange menu does not appear when I use the key standard exhaust or menuitem "save the contacts' point, only when I use the Save method or cancel button on my screen.

  All three use the same code - MainUi.popScreen (MainUi.getActiveScreen ());

  Here is the

  Why does this menu appear?

  I use JDE 5.0 in eclipse 3.5.2 with plugin 1.1 and a 9530 Simulator.

  Thanks in advance.

  If your buttons are the ButtonFields standard, you can create them with the style bit ButtonField.CONSUME_CLICK (possibly in addition to other bits of style, you already specified).

• java.lang.IllegalArgumentException When pass RMCS to proc

  Hello
  
  the use case is to call the 2-argument procedure defined in AMImpl
  When you click on the button get
  < Utils > < buildFacesMessage > ADF: addition of the JSF error message: java.lang.IllegalArgumentException
  java.lang.IllegalArgumentException
  
  
  What does take to succeed guys?
  I can pass it directly to #{bindings.register_id_var2} or only viewScope vars should be used?
  
  < af:commandButton text = "invertRegisterLines" id = "cb6' partialSubmit = 'true' actionListener =" #{bindings.invertRegisterLines.execute} ">
  < af:setPropertyListener from = "#{bindings." RegisterId.inputValue}"to =" #{bindings.register_id_var2} "type ="launch"/ >"
  "< af:setPropertyListener from =" #{securityContext.userName} "to =" #{bindings.user_name_var2} "type ="launch"/ >
  < / af:commandButton >
  
  in pagedef:
  
  < attributeValues IterBinding = "DcaRegisterLinesV1Iterator" id = "RegisterId" >
  < AttrNames >
  < point Value = "RegisterId" / >
  < / AttrNames >
  < / attributeValues >
  < methodAction id = "invertRegisterLines" RequiresUpdateModel = "true" Action = 'invokeMethod '.
  MethodName = "invertRegisterLines" IsViewObjectMethod = "false" DataControl = "AppModuleDataControl."
  InstanceName = "data. AppModuleDataControl.dataProvider">
  < NamedData NDName = "register_id_var" NDType = "int" NDValue = "${bindings.invertRegisterLines_register_id_var}" / >
  < NamedData NDName = "user_name_var" NDType = "java.lang.String"
  NDValue = "${bindings.invertRegisterLines_user_name_var}" / >
  < / methodAction >
  < attributeValues IterBinding = 'variables' id = 'register_id_var2' >
  < AttrNames >
  < item Value = "invertRegisterLines_register_id_var" / >
  < / AttrNames >
  < / attributeValues >
  < attributeValues IterBinding = 'variables' id = 'user_name_var2' >
  < AttrNames >
  < item Value = "invertRegisterLines_user_name_var" / >
  < / AttrNames >
  < / attributeValues >

  Grodno, she so help us if you tell us your jdev version and format the code you post here. Please read the FAQ (https://forums.oracle.com/forums/help.jspa) to know how to format the code you post here!

  Your problem is that you try to write directly to the valiable that represents your setting. You must use the link which is accessible from the GUI.

  And you need to use the action as the event type.

  Timo

  Published by: Timo Hahn on 05.02.2013 10:33

• How to add values by default when you add a component customized for fashion design?

  I have a set of custom (in general) components that extends spark components. But when you add our custom mode component creation, how can I set defult (in AS3) values.

  For example, s:Button default = "Button" label when adding application, or mx:DataGrid has 3 predefined columns, but when you use custom components there are no presets like this.

  I can put these values in the constructor, but they are not visible at the time of the design, only run time.

  Any ideas? Thank you

  Esmin

  Yes. Either way, I found the solution. Someone might find this useful.

  In the light of the design.xml

  Use this

         

     

  so when you add this component to the design mode, it will be the text value ("ExtendedTextInput" in this case).