Unequal distribution of the objects around a circle

Similar Questions

• Wrap a dynamic object around a circle?

  It is a detail of a current project for a group challenge.  The image provided is the door and steps, and you can see what theme I'm going with.  The entire guitar was built as illustrations of PS.  The strings are a dynamic object of four layers bent of the nut to the tuning pegs with deformation of the puppet, but I need to bend the strings around the ankles to look at as they were liquidated, and I am struggling to think of a solution?

  

  A dynamic object in a dynamic object in a solution of the dynamic object with polar coordinates also seems possible.

  

• How to position the elements around a circle at 15 deg increment

  Hi, I paint a logo which, to an outside circle with 24 small circles positioned around the edge.  Each of the smaller circle has a letter 't' a point on the circle.  I need to set the small circles at the same distance each and each rotated 15 degrees around the great outer circle.

  Someone at - it a technique it are willing to share?

  Thanks for your help

  • Create a large circle to determine the rotation
  • Create a small circle and place it at the top of the large circle
  • Create the letter T with the text tool and place it inside the small circle
  • Use the alignment tools to center the T in the small circle
  • Select the two layers (T and small circle) and then convert to smart object
  • Press alt-ctrl-t or opt-cmd-t to enter the mode of transformation for duplication
  • move the pivot point at the center of the large circle
  • Place the cursor just next to the small circle, then turn the circle at the location following (use the SHIFT key to constrain in 15 degree increments)
  • Click on the Enter key or return to confirm
  • Hold down the ctrl-alt-t or cmd-opt-t to repeat the rotation, then repeat this step again once and so forth until the small circle is all around the big circle.
  • Change the large circle to taste.

  

• Wrap the object around a path?

  Hello!

  I was wondering if there is a quick way to do it. Watch here: 2015-02-19_0920 - library of losse2010 I am trying to wrap the links in the chain along the "curly" of the text. At first, I thought that I cut and paste the link and then turn them to follow the line but realized it's a lot of your time! I was wondering if there is a way to align the links throughout the text 'lines' of faster way using a path or a brush any?

  THX

  What you want is a brush model.

  https://helpx.Adobe.com/Illustrator/using/brushes.html

  https://helpx.Adobe.com/Illustrator/how-to/Illustrator-create-pattern-brush.html

• Is it possible to move a ramp Gradient along with / to the object?

  I asked here: make a Gradient ramp can Start/Stop when be relative to the object? but it has not generated any answers for me. If someone is in the StackExchange scene and wants to meet here also it would be great.

  What I'm trying to understand, that is if there is a simple way to have a Gradient of the ramp to start and stop positions relative to the object, to which the effect is applied. I guess I could make delicate Pickwhip stuff, but it seems that there should be only a checkbox somewhere for that. Looks like a very obvious thing for me. I select a shape, apply a ramp degraded, if I move this shape I want the gradient ramp to move as well. Otherwise the shape looks radically different if not completely flat.

  Is there a simple way to do this?

  I know, the first time I was, I met like 'what the Devil's going! "

  You dial before the item with the ramp on it - this will be 'rasterize' effect (so to speak), so when you move the object around the screen, the ramp will sit where it should.

• I don't see Smart Guides around all the objects on the artboard even if the guides are checked in view

  Hello

  First of all, I don't pretend to be some illustrator expert but I have a good understanding of the functions of Adobe Illustrator key.

  However, when I went to design a logo yesterday, I don't see smart guides (blue lines, see below with all selected items) around all the objects on the artboard even if the guides are checked in order. I do not expect the controls on each being showing unless they are selected, but I do that I expect to see the blue line itself.

  
  

  
  

  I contacted the Adobe Illustrator Chat but really, they do not seem to have a clue and seemed to be intentionally misunderstanding me despite the fact that I sent this image. They were also quite rude!

  In any case, I'm now desperate so someone here can help me please.

  Thank you very much

  Mike

  PS I looked everywhere online for a solution and tried some of those suggested but without success.

  You may not see an unselected object with no line or fill in preview mode (this is why it is called overview).

  You can select it when you don't have fill and stroke in the tools Panel and choose: select > same > background & contour.

• Grey outline around the objects when exporting to Photoshop

  Hello

  I have a strange issue when exporting with a simple badge that I'm working on Illustrator to Photoshop.

  Everything seems well within the Illustrator, but when I select my creation and copy and paste into Photoshop, then as a "dynamic object" or "pixels", I get a strange gray outline around the objects that should be hidden.

  I use the latest versions of Illustrator and Photoshop 2015 CC and their installation on Mac OSX El Capitan v. 10.11.3

  Edit: I noticed that the compression of the screenshots, it is difficult to see, but it should be very obvious if you download AI and try it yourself.

  I link to the file: http://bit.ly/1QhIi6i

  Best regards

  Rasmus

  

  

  

  

  I think that the problem is more on the side of Photoshop.

  Rasterize the objects in Illustrator; no visible lines.

  Pixelation in Photoshop; the Ant-aliasing artifacts.

  It is easy to reproduce: put a couple of black oval overlaid. Use Pathfinder > divide

  Now you have perfectly fitting distinct forms.

  Copy and paste into Photoshop; lines.

  Rasterize them (or use the pixelation effect) in Illustrator, copy and paste it into Photoshop. no lines.

• My daughter bought InDesign CS5 inscribed at the University of Albany. Since then, she hasn't needed InDesign and I would like to move to my computer but cannot access his old email. Support is a joke (running around in circles). How can I get this on my

  Since then, she hasn't needed InDesign and I would like to move to my computer but cannot access his old email. Support is a joke (running around in circles). How can I get this on my machine? I have all the files download, she had.

  Legally, you can't transfer a teaching license.

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• Don't not wrapping around shape of the object of the text

  Hi all

  This is probably a silly question, but I can't seem to get my wrapping around shape of the object to the text.

  I can see the edges of the object are well identified, but the text wraps around them.

  What I' hurts lm?

  -Images must be in their own framework, or do they need to be in the same frame as the text?

  -Do I need to do first the images with a transparent background in Photoshop? If so, what is the ebst method? Use PNG, Gif, PSD, Alpha channel...

  -Do I need to order my items in ID to set the correct order (sent to the background image or stuff like that..)?

  

  Thanks in advance for your help

  Tom

  PS: I have attached the screenshot as a file as an attachment online apparently gives question; If you can view full size

  It seems that your picture is on the top of text... try to change the by object stacking order > Arrange > Send to back...

• Spinning object around while turning around another object?

  How can these movements at the same time ? (THE ARROWS ARE JUST TO EXPLAIN WHAT IS THE MOVEMENT, THE ONLY OBJECTS ON THE SCREEN ARE THE STARS) The blue arrows represent the movement of all the stars around the center of the circle, and the Red arrows represent the movement of each star around its own Center?

  

  Make the star.  Make a layer; its default anchor point position the exact Center of the model.  Place the star too far from the null value as you like it and that parent to null.  Animate the rotation of the null value.  Animate the rotation of the star.  Fact.

• I want to wrap the text around a transparent sphere

  I want to be able to wrap text around a transparent in illustrator sphere, such as the text of Forefront is darker than the background text.  I followed this tutorial logo 3D (new) - YouTube video, but I can't understand what is happening after expansion to 06:13.  Can someone help me, please and thank you.

  Assuming that you got to the part where the object is expanded (06:10), depending on whether you choose the "direct selection tool" and select only the outline of the circle (invisible, but if you wanted to see go to view > outline) carefully not choose anything else and delete (twice). And then you just object > Dissocier 3 times. as a result your forehead back text will be selectable.

• Test whether the object is Assigned() which means... not null

  In Delphi using the Windows SDK, I can use the Assigned() function to determine if an object has been instantiated... IOW, not null.  How this is done in ActionScript?  I've been going around in circles in the documentation.  I can find every keyword and the operator, but I can't find how to test a null object variable.

  If (MyDataGrid.selectedItem is not null) {.. my... code...}

  Thanks in advance.

  If (MyDataGrid.selectedItem! = null) {.. my... code...}

  or

  If (!.) MyDataGrid.selectedItem) {.. my... code...}

• Reference the object expected found execution

  I have a .NET DLL that has a method that takes a parameter of reference an object of type NationalInstruments.TestStand.Interop.API.Execution. In TestStand 4.2.1 it worked well if I spent it RunState.Execution.

  Now in 2010 TestStand I get an error in TestStand that the method expects an object reference, but found a writ of execution. A performance, that's what I want is what describes the method. Then, why this doesn't work?

  Anyone have any ideas?

  Thank you.

  Skeptical salvation,

  It is a known backwards compatibility problem introduced in 2010 TestStand and will be fixed in a later version.

  That said, is not really meaningful for the parameter as byref (i.e. input/output) in this case, execution is already a type of reference data interface. Thus, passing byref implies that the method has the possibility of replacing the object that points to RunState.Execution with another object of execution that very probably is not something of the method would make ever.

  To work around this problem, you can do the following:

  (1) changing the prototype of the method (or add a new overload) to take the run by value setting (i.e. only), which is probably what that the author of the code really the intention anyway.

  Or

  (2) create a local variable of type object reference and assign RunState.Execution before your call to the method, and then pass the local variable for the byref parameter.

  Please let us know if you have any questions or if workarounds are not enough for you.

  Hope this helps,

  -Doug

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.