Unicode mode for planning applications

Similar Questions

• Speakers stereo mod for ALL applications and sounds

  Sony Hi community,

  I want to ask you if there is a mod without root using the speakers of my Xperia Z2 on stereo for all applications, calls and sounds (System and not system).

  I found very bad that Sony didn't optimize Android 5 this feature because speakers of the Xperia Z2 are beautiful and functional, better than the Z3, but without stereo output are very limited and potential of this smartphone!

  The stereo speakers of Xperia are one of the design features LARGE and the BEST against all THE Samsung and Apple devices, so I don't understand why they use stereo Sony to give us a powerful and especially audio output COMPLETE

  I hope in a future implementation of this setting in the next firmware update, but now I haapy even if there is a mod sostitutive to force them to use stereo speakers for ALL o.

  All responses are welcome for me!

  See you soon

  Alessio_84

  The mod that I use currently uses two speakers for everything except the speaker, but that's because I use an older version (the mod has since been updated to include the speaker, but since I got back from vacation early this morning, I got a chance to further improve). I intend to give it a try later tonight.

  Unfortunately, it requires root. The good thing is that you do not need to unlock your bootloader to root the device, so don't lose your drm keys.

  Here is a link to the thread:
  http://Forum.xda-developers.com/showthread.php?p=60337177

• LCM for planning applications: is - this process all or nothing?

  When I LCM some of my planning applications, my immigration status reports show "Failed" and I see errors.  In a scenario, there are users and security permissions for users who are no longer in the MSAD repository (terminated employees).  Does that mean that these users and ACL is "jumped" and everything else is good to go?  Or migration 'stops' at a time when there are enough errors determined at some (coonfigurable? threshold?)

  This is 11.1.2.3.500 btw.

  Thanks in advance,

  -Vince

  The Migration status report should show what has been missing, the rest must have been imported.

  See you soon

  John

• Display Manager keeps Dell mode multimedia for Windows applications like settings, Mail, etc..

  Can't understand why my display Manager continues to change the media color profile when I go in settings or by mail (Windows 10 apps).  In my Auto Mode settings, everything I have is Standard as default values except for the game mode for games full screen.  Yet whenever I go to the application settings or mail it keeps switching media.  I use the U3415W display in Windows 10 and I have the latest drivers.

  

  It is a conflict between the new and old versions of the MDD. If you are comfortable with the Windows registry, go to HKCU\Software\EnTech\DDM\Apps and simply delete the values that begin with 'Metro '. Then restart DDM and the default mode for Win10 applications will be everything you select to 'by default for universal Windows applications'.

• Read access to planning applications.

  Hi gurus

  Is it possible to give read access for planning through HSS applications? similar to 'Read' access to essbase applications? I m in 11.1.2.1 and commissioning Options, we are Analytic Services write, Cube creator, Director, interactive user access, manage models, distribution of mass, Planner, Provisioning Manager, user of the view. Single user view sounds just for read access I need. If I select a read access, it seems that I need to give access to all forms, dimensions (members) access in reading in every app plannign etc... Is there a default role for all the read access for planning applications?

  Thank you

  rrK

  Planning security is different from security Essbase. You must provide a read access to your secured dimensions to him visualize the dimensions. same thing applies to forms.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Maximum number of user defined dimensions for Hyperion application with several types of plan

  Dear,

  I know that the maximum number of dimensions is 20 for an application and for better performance, we shouldn't have more than 12 years, but if we plan different types? I found the below in the psb user guide:

  "Applications are supported up to 20 dimensions. However, optimal performance, not more than 12 dimensions must be attributed to each Type of Plan. »

  I have therefore 20 dimensions by plan type, or application? and that optimal performance it should be 12 dimensions by plan type, not by the application?

  Any advice, please?

  Thank you

  Hello

  The limit is for a planning application for a type of plan... You can add dimension to choose to exist for a type of plan in particular.

  All members of custom dimension that there will be for only this type of regime...

  Kind regards

  Sourabh

• Oracle schema for planning an Application

  Salvation by the Expert,

  What is the advantage of having a new scheme for a new planning application? It is advisable to use an existing scheme that already contains two planning application? What are the benefits of using the same schema for a new application plannign?

  Kind regards

  SG

  You must have a separate scheme by planning request otherwise that demand will be replaced each time.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Financial reporting for Hyperion Planning Application error

  I get this error when you try to run a HFR report in the workspace, which connects to a planning application:
  
  Query execution error: error: internal error Essbase JAPI: [cannot run the report. [Essbase Error (1012709): virtual time series, the last period of time set [period] is not a time dimension member level 0]
  
  My question is: where I put the last time period in the planning application?
  
  I googled like crazy, but I can't seem to find anything like that, but the period start and end parameters. When I go in the settings of SDRS to the planning application, there is no option to set the 'last period of time."
  
  Thanks in advance for your time.

  Seems that you won't put perspective preview so you can not choose a period, in the workspace, go to file > Preferences > Financial Reporting, set an excerpt to it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Unity Mode - icons in the taskbar on the host do not work as expected for some applications

  In Unity mode, the icons in the taskbar on the host computer do not work as expected for some applications. The following problems may occur:

  1. several icons for a single application.

  2 aero Peek does not work if the application is reduced.

  3 icon moves to the end of the task bar after restoration of the collapsed state.

  These problems make it difficult to work in Unity mode. Here are some details about my setup:

  VMware Workstations Version: 7.0.1 build 227600

  Host: Windows 7 64-bit (all updates applied)

  Client: Windows XP (all updates applied)

  Steps on how to reproduce the issue n ° 1:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3. minimize and optimize Visual Studio 2003. Finally, you should see several icons, each with a different air look.

  When this happens, you can maximize is more than a simple click (as there are a stacked icons). Sometimes, only one of the icons to display Visual Studio 2003 (when testing this now, the other icon displays a portion of the Office of comments). If multiple copies of Visual Studio 2003 are launched, it is difficult to know who is who.

  Procedure reproduce problem 2:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3 minimize Visual Studio 2003.

  4. place the cursor on the icon. You should see the icon in Aero Peek (similar to the Aero Peek look when you use Microsoft Windows XP Mode).

  Aero Peek works great for other applications reduced, such as Windows Explorer.

  Steps on how to reproduce the issue n ° 3:

  1. start the mode of the unit for Windows XP clients.

  2. launch Visual Studio 2003 on the start menu of the unit.

  3. start Windows Explorer in the start menu of the unit.

  4 to minimize Visual Studio 2003.

  5 optimize Visual Studio 2003. The icon disappears briefly and then displayed in a different location (to the right of the icon in Windows Explorer).

  I guess that these issues will eventually with the similar Microsoft products such as SQL Server Management Studio, newer versions of Visual Studio, Microsoft Office (I guess just--I have not tried other programs).

  These questions, it is very difficult to use Visual Studio 2003 in Unity Mode, which is the main application, I need to use the virtual machine. I would love to see these issue fixed.

  Kind regards

  Tim

  Hi Tim, this behavior all boils down to the fact that when you reduce the VS, is not to minimize as windows normally do. VS hides the main window, and then returns to the window in the reduced state.  When the host sees the window becomes hidden, she removes the button from the taskbar to the window of the unit; There is no way of knowing that the window will be re-shown again later.  The thumbnail Aero does not work for the reduced window because the host never saw this window in its normal state, so that the host knows not what are the contents of the window.

  The good news is that you can work around the button behavior of taskbar in Workstation 7.1 by pinning the window VS. In this way, the taskbar button will always be there no matter how many times the window of the unit is shown/hidden. It will not solve the problem of thumb nail, however.

• How to migrate filters essbase for a managed EPMA planning application?

  Hello
  
  How can I migrate the essbase filters I created on the environment from dev to QA environment.
  I created these filters on the essbase for 11.1.1.3 EMPA managed planning application. and it's shared services based application.
  
  I need to migrate:
  1. the filters with their association with groups.
  
  Please suggest.
  
  Thank you
  Ankit

  You could look at using LCM to migrate objects.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to find the user oracle for a planning application search

  Hello
  I know how to take backup but I dnt seem to remember the user that I created in oracle to the planning application and there are many users that there are many applications on the sytem, how to know which is the user for a particular planning application
  Thanks in advance

  I would of thought you would name a name of data source with the same name as the planning application, it makes it a lot easier, the naming scheme of names with the same name also keeps everything the same.
  If you can not link the name of the data source for the name planning then you will need to look at the system of planning and HSPSYS_DATASOURCE and HSPSYS_APPLICATION tables, this allows linking by ID.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Accounts for plan 1 dense and sparse for plan 2 to a Hyperion Planning application

  Nice day
  
  I have two cubes in Hyperion Planning Application only, I wish that both have a Dense accounts cubes and for the second sparse accounts.
  
  The cube that I have held with sparse accounts is mainly because I like the accounts of 600 to 800 and I need to have several attributes (with Dimensions of attributes to accounts).
  
  As far as I know the Dimension type of "Accounts" allow attributes dimensions when is sparse, but in Hyperion planning if the second cube accounts is Dense it me does not have this feature. Anyone know if this is an expected behavior? A bug? Or my mistake?
  
  Kind regards

  Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/attr_man.html

  * "The account dimension is usually defined as dense, thus impossible to assign attributes to it unless it is replaced by sparse for all types of plan. If you replace a sparse dense dimension, all attributes and the values of the attributes of this dimension are deleted. » *

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• SS for external Applications 11 g - log mode of contribution

  Hi all
  
  I followed all the steps in the "Guide to the developer for Site Studio for external Applications" Chapter 4...
  
  When I try to enter input mode, the connection to weblogic page appears... when I enter login and password, nothing happens...
  the page posts but returns to connect again with the following error:
  
  [Security: 090304] Authentication Failed: User weblogic
  javax.security.auth.login.FailedLoginException:
  [Security: 090302] Authentication Failed: User denied weblogic
  
  
  
  I already checked web.xml:
  
  < security constraint >
  < web-resource-collection >
  < name-resource-web > ContributionMode < / web-resource-name >
  <>url-pattern / wcm-contrib / * < / url-pattern >
  < / web-resource-collection >
  <>auth-constraint
  < Role name > WCMContributor < / role name >
  < / auth-constraint >
  < / security constraint >
  <>login-config
  FORM < auth-method > < / auth-method >
  < form-login-config >
  /WCM/Support/login/WCM-login.jsp < form-login-page > < / form-login-page >
  /WCM/Support/login/WCM-login.jsp < form-error-page > < / form-error-page >
  < / form-login-config >
  < / login-config >
  <-security role >
  < Role name > WCMContributor < / role name >
  < / security role >
  
  
  In weblogic.xml I have:
  
  < security-role-assignment >
  < Role name > WCMContributor < / role name >
  WebLogic < SPN > < / main-name >
  < / security role assignment >
  
  
  
  Can someone point me the way?
  
  Thanks in advance,
  
  Nuno Pestana

  Hello

  There are two possibilities are there that can be causing this.

  1. bad password used. If you are deploying outside the site on IntegratedWLS (JDev internal weblogic) then the user id / pwd comobination is: weblogic/weblogic1

  2. check the tab of assignment of security role for weblogic.xml and check if the security role assignment is configured properly.

  Hope this helps

  Thank you
  Srinath

• Balls for planning and working space application

  Hello
  
  where can I find the logs of the planning application and the workspace.
  
  Hyperion is installed in the folder dir HYP_Home - please tell me where I can find the logs
  
  Thank you
  RAM

  Hello

  Newspapers are all under hyperion\logs

  For the workspace:-\Hyperion\logs\BIPlus
  Planning your best bet will be \Hyperion\logs\services\HyS9Planning-sysout.log

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/