Uninstall Cleaner on Windows 10 Slim

Similar Questions

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• How to clean install Windows 7 on Windows 10

  My old laptop packed recently so I had to buy a new one and it came with Windows preinstalled 10.  I'm not a fan of this os, so I want to get rid of 10 windows and install Windows 7.  With work, I found a new drive to install windows 7 to a computer store and now I want to change but I don't want to mess up so I thought I could post it here and see if there's something I should do first, or be aware of.  I have already moved all the files I want to keep it out of the computer to an external hard drive.  The unit is an Asus x552wa.

  I've never done anything like this before so the tips (or step-by-step procedure) would be greatly appreciated!

  Andrew

  Follow these same steps to do a clean reinstall Windows 7 which was used by 2 million consumers without a single complaint.

  Remember to follow the steps on the drivers that are important, they are printed in red.  Windows is quickly updated via Windows Update and driver-complete in Setup.  One or two still missing after installation are easy on the PC or a specific Web downloads of the device Support page.  No modern device would not have pilots who work for Windows 7, which is the operating system that is more prevalent in the world today.

  At any time you can reuse your Windows 10 license and get a facility much better that the bloated factory install make a clean install Windows 10   No one had any complaints from thousands of people who have so far one.

  If you want to give another chance to the installation, you have now, try optimizations available in the Wiki - in particular establishing a clean boot to turn off the bloatware factory starting with Windows that strangles the BONES and is never necessary to all.  Also uninstall all antivirus inflated by default for integrated defender who offers better performance.  If you try these and other steps you decide you like Windows 10 better just like I did even if I was (literally) it is more supporter who helped tens of thousands of consumers seven Forums before install Windows 10 and find faster and more modern even while retaining what I liked the most in Windows 7.

  Do not hesitate to ask questions in return and let us know how it goes.

• Updated my Windows 7 to Windows 10 and then installed AR version for windows 10.  Due to a problem unconnected with returned to Windows 7 and uninstalled AR for Windows 10.  When I try to reinstall AR for Windows 7, I get the following message. "The featu

  
  Updated my Windows 7 to Windows 10 and then installed AR for Windows 10.  Due to a problem, I deleted Windows 10 and returned to Windows 7 and uninstalled AR for Windows 10.  Have tried to reinstall AR for Windows 7 and get the following message.  "The feature you are trying to use is on a network unavailable resource.  Error 1714.  The older version of Acrobat Reader DC may not be withdrawn".  Help!

  Hi michaelw72331164,

  Try this: error 1714. Acrobat, Reader

  If it does not work. Cleaning tool to uninstall all traces of player and then install offline using.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

  Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek

• How do you uninstall Lightroom in Windows 10

  I can't find where to uninstall them in windows 10

  Hi Almeida,

  You can uninstall the software from the Control Panel or Creative Cloud Desktop App.

  Windows:

  To uninstall or change a program. Open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features. Select a program and then click on uninstall

  Creative cloud

  Open Creative Cloud desktop application, go to the section of the application, select the software you want to uninstall, there will be a gear icon, right-click on the icon and click on uninstall.

  

  In addition, you can use the uninstaller of creative cloud as well. Use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. Prva Nice

  Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. I expected more of Firefox as a privacy feature!

  Sorry to hear about this, you should always beware of the pop-ups - never open or install anything, unless it is on the official website. Firefox has built-in features (and extensions that you need to find and install) to protect your privacy and security, but all users must still be careful with their browsing habits. You can report malicious links to the FBI Internet Crime Complaint Center here: http://www.ic3.gov/complaint/default.aspx

  You can also report false web documents by clicking on:

  • Help > report false Web, or
  • 

    >

    

    > Report false Web

  Regarding your malware, please follow this guide:

  • http://malwaretips.com/blogs/zombie-alert-virus/

  After removing your malware, consider extensions such as Adblock Plus.

• Tip: Uninstall QuickTime for Windows

  iTunes has not invoked QuickTime for several versions and in most cases it is unlikely to have contained or visit the websites where it is needed. Ideally, you should uninstall QuickTime without delay. See Uninstall QuickTime 7 for Windows - Apple support for advice of the abduction.

  If you have problems uninstalling QuickTime or iTunes update, see troubleshooting problems with iTunes for Windows updates . Note that, in some cases, Apple Software Update may have ceased to provide you with the latest versions. At the time of the display, the current versions of iTunes are 12.3.3.17 for Windows 7 or later and 12.1.3.6 for Windows XP & Vista.

  TT2

  < published by host >

  There is a very good reason to uninstall QuickTime for Windows. Two vulnerabilities found and Apple stopped updating QuickTime for Windows.

  Note: QuickTime for Mac OS x is still supported and updated.

  http://www.wired.com/2016/04/uninstall-QuickTime-on-Windows/

  http://blog.trendmicro.com/urgent-call-action-uninstall-QuickTime-Windows-today/

• Clean install Windows 7 with UEFI in dv6-7215nr

  Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

  To this end, I have 3 questions to solve some installation issues.

  1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

  I tried to install Win 7 after the pre-requisites following:

  (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

  (b) already installed Windows 8 files with UEFI

  (c) UEFI enabled

  (d) heritage disabled startup

  (e) secure boot disabled

  When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

  I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

  2. where can I download drivers for Windows 7 for my laptop?

  I found this topic:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

  They point to these drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

  I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

  3. is it possible to Secure Boot with Windows 7 SP1?

  I have no research on this so far.

  Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

  Carlos

  (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

  You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

  (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

  (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Envy 17: Clean install Windows 10 without upgrade.

  Hello

  First of all, I am very happy with my new HP laptop first, it's amazing!

  Now my problem. The laptop came with 8.1 Windows preinstalled with a free upgrade to Windows 10, however, I want to do a clean install Windows 10 without going through the process of upgrading (or would defy a 'clean' install), without additional software (I have already downloaded all the drivers and software from HP Web site) and I wanted to make the installation of the driver/software myself.

  Now, I had the key OEM with software, however...

  I read several threads related to this problem, the recommended steps were required to use the creator of media, but that won't install it Windows 8.1? I know that I coud after upgrade, but I wanted to avoid this step

  In any case to create support for Windows 10? If I clean install 10 Windows with a retail key, I'll lose the built in recovery?

  Thank you very much for your kind attention,

  Best regards

  Francisco

  To answer your questions:

  (1) MS media creation tool: Activation in Windows 10 - Windows help offers several options: to upgrade this PC now, create installation media (download the ISO file), create an installation (DVD or USB) media.  Choose the option that suits you - understand that upgrading PC, this option does NOT create an ISO file or installation media.

  (2) lose the built-in recovery.  IF you ask on the resumption of Win8x HP - then Yes.  That no longer works after upgrade Win10.

  (3) retail vs upgrade and recovery: Version does not matter, you will lose HP Win8x recovery without worrying.

  (4) retail key - you get ONLY a touch of detail if you buy a copy at Win10 retail.  The version proposed for the free update does not product keys for activation.  You MUST install a version upgrade on top of an existing installation of Win7/8/8.1 so that it will activate.  If you install directly from media Win10 Upgrade, starting from the media and did an install clean, not only will win 10 then NOT activate, right now, it will NEVER activate.  MS talking about providing an option IN THE FUTURE, to allow people to enter a Win7/8/8.1 existing product key - but this feature is not present today.

• Spectrum xt Touchsmart 4000th 15: laptop back to factory State: clean install Windows 10?

  Tried to upgrade from 8.1 to win to win 10 via Windows Update and got BSOD/reboot cycle with error on page iastorav.sys. Envoy for HP laptop and it has been recreated to win 8.0 State of origin to the 2 years ago. The best way to proceed from here?  My main options appear to be:

  1. download and install updates Windows 188. I don't like that it take ages and a large number of concurrent updates may cause problems (in my experience).

  2. restore the System Image which I saved before you perform the upgrade to win 10 previously. I fear that this may make me just back from the problem that caused the failure in the first place.

  3. update the drivers and do a clean 10 Windows Installer from USB. I think it would probably be the best option. I have all my old documents backed up elsewhere.

  I am especially looking forward to having good drivers Intel rapid storage (iastorav.sys) and also the right drivers and Setup to start quickly in Intel technology.  My laptop has a hybrid SSD/HDD.

  My key to win 8 is integrated on the motherboard. The new Windows 10 threshold Update will automatically validate on my HP laptop? This laptop only has not already been upgraded to Windows 10 (the upgrade failed).

  I would appreciate your help to find good drivers and also advice on installation and activation Windows 10.

  Thanks for your help!

  Hi SDJL,
  Thank you for taking the time to answer for me.
  I was hoping to use the update in the fall for a simple installation and activation, but now MS are removed it their MCT.
  I bit the bullet and started hp updated driver installation and updates of Windows to get to win 8.1.
  It took 9 hours to 254 Windows updates for 8.21 Windows running. I installed the updates of the hp driver 9 such as recommended by hp support assistant. Unfortunately, the Intel driver fast storage SP63642 failed to install twice using the HPSA. What should I do? I'll try the direct download from the hp site. any other suggestions?
  Thank you

• HP Envy spectrum 14 Clean installed Windows 8, no audio signal?

  Hello! Recently I clean installed Windows 8 and now my sound does not work. Beats logo is not turn on like it used to, and by pressing the Control Panel audio side button does nothing. However, the volume scroll still works and the mute button always works.

  My model number is 14-3017NR.

  Edit: Headphones does not work either. According to me, Miss me probably all of my drivers. Is there an easy way to upload everything?

  Thank you!

  Hello

  Please install 'IDT High-Definition Audio Driver' using the following driver:

  FTP://15.192.40.10/pub/SoftPaq/sp58501-59000/sp58746.exe

  Kind regards.

• can I remove the patch uninstall program after Windows Update completed?

  can I remove the patch uninstall program after Windows Update completed?
  are the uninstall program is temporary file? or the update file?

  because my full HARD disk starting with the files

  can I remove the patch uninstall program after Windows Update completed?

  Only if you are sure that you will never need to uninstall the update of 100%.

  my full HARD disk starting with the files

  See this discussion archived instead-online http://aumha.net/viewtopic.php?f=62&t=33827

• You can uninstall and reinstall windows media player with windows XP

  can you uninstall and reinstall windows media player with windows XP and how?

  The following article might be worth a visit:

  (934372) how to uninstall Windows Media Player 11 in Windows XP
  http://support.Microsoft.com/kb/934372/en-us

• Uninstalling and reinstalling Windows XP

  If I uninstall and reinstall Windows XP by using a Windows XP CD I have, which will solve some problems I'm having?  ? They are slow start, slow down access for my ISP to other messaging on the ISP addresses, etc.. ?

  It is not difficult to reinstall Windows when you know the procedure to follow. However, it can be very time consuming saving your files and reinstall them later installation of drivers, reinstall applications and download all the programs you had before etc. Assuming that your hardware is OK Yes your problems will disappear. Try to resolve your problems first. Go here and do scan it is a free service offered by Microsoft, could help.

  http://OneCare.live.com

• How can I remove Windows 7 - &#62; Clean install Windows XP

  Windows 7 do not allow xp reload

  Please see: Clean install Windows XP Carey Frisch