Uninstall does not work for system update in Vista

Similar Questions

• Windows Update does not work for five updates to Vista x 64.

  Updates are identified as KB2378111 KB967723, KB235886, KB970430, KB972145.  I am running Vista Ultimate Edition with service pack 2.  Whenever I tried to load updates 'failure '.  This happens on a daily basis.  The error code is 80070490.  Assuming that these updates are important, what should I do to load?  Assuming that these updates are not important, what should I do to "erase" the queue of the Windows Update?

  ERROR_NOT_FOUND 80070490
  Windows could not search for new updates

  Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2 under the resolution on this page - see
  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Don't forget to download and record the version of readiness (CheckSUR) system update tool corresponding to your system architecture.
  If you don't know what it is, click on the link under "If you are not sure which edition of Windows is installed, follow these steps:"for "
  Method 2: download the update directly system preparation tool from Microsoft Download Center .

  Once the download is complete, configure the computer to start in minimum mode - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  Restart the clean boot state and run CheckSUR with the system connected to the internet, you will need to download files.

  NOTE: in the Clean boot state all the 3rd party firewall will be disabled.
  Click on the round to start, in the Start Search field type in the firewall.
  Click on the link to the State of the firewall Check to verify that the native now on Vista firewall.

  After that end run CheckSUR, cancel the clean boot procedure, and then restart.
  If a 3rd party firewall is used, ensure that it is now and the native Vista firewall isnot.
  See if the system can update now.

  If it still cannot be updated, please post the contents of one of the newspapers that CheckSUR created when he ran.
  They are in

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheclSUR.persist.log

  And, please copy & paste lines for 50 or so of WindowsUpdate.log as well as one of the CheckSUR newspapers, too.
  How to read the Windowsupdate.log file

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Quick setting does not work for the update of the BIOS.

  I have dell Inspiron 5559, I updated my bios to the current version, but apparently my quick adjustment does not work. I tried to uninstall, but it says "the Bios in your computer is obsolete. Update your bios firmware to the current version. "I can't update the quickset too! What should I do?

  Thanks to avd. ...

  But the thing is, after using it for a few days, pls, make sure the bios or driver quickset issues are resolved on the next update, on their compatibility. Quick setting works fine now, but the bios updated makes driver it is unnecessary because DellPowerManagement does not work amd icons quick adjustment of the numeric keypad and fn key doesn't happen. Aparently, the powermanagememt can be woroed in the menu of the bios and quickset icon doesn't show, but guess on the behavior, you can see if the keypad lock and fnlock is enabled or disabled. So I would say users do not use bios 1.2.4 update, better, use 1.2.3 that works smoothly and with all the features.

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore

  A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore. How can I get a new one

  Skip, enter the product key, and then complete the installation.

  Try the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

  I want to uninstall the application, because it does not stay charged and want more on my computer and not perform the steps for removing it, but none does not work for me.

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• My creative cloud crashed trying to update; There is no option to quit or even force them to leave; and try to reinstall or uninstall does not work as it considers its still running. Please advise?

  My creative cloud crashed trying to update; There is no option to quit or even force them to leave; and try to reinstall or uninstall does not work as it considers its still running. Please advise?

  Please see I get an error code 81 when I try to install creative cloud.  Help!

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• Recently closed tabs does not work for me

  Recently closed tabs does not work for me. When I go to history-> recently closed tabs is not available and the shortcut does not work. It happened a few weeks ago, and when it happened first, the shortcut would open the tabs in the weeks earlier. I can't find any information on this and would like to see it fixed.

  There are other things that need your attention on the updated the prefs that shows in your list of details of the system.

  Reset the general.useragent.compatMode.firefox to false, and all prefs network.http on the topic: config page.

  • http://KB.mozillazine.org/about:config

  What is the value of the browser.sessionstore.max_tabs_undo pref?

  • http://KB.mozillazine.org/browser.sessionstore.max_tabs_undo
  • http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• Firefox Sync does not work for Tablet Android Nexus 10.

  Firefox Sync works for 2 PCs, but does not work for an Android tablet. It is said, that the tablet was connected successfully, I checked the bookmarks and history options to be synchronized and or bookmarks, or history of the browser has not been updated on my tablet.
  No errors. Anything not came to the Android device.
  I tried with 2 different synchronization profiles - same story for the second profile.

  Please note that we are currently living with Sync server issues. Our technicians are working around the clock to the question of setting and ensure that it works at its best. The current option is to try to keep synchronized and if you are able to synchronize properly, we recommend to not not to sync more than once every 2 hours.

  Thank you and sorry for the inconvenience.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

  I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
   
  2991 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  1:34:27.0000 03/01/2016 Z ServerTime
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
   
  2943 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  16:52:38.0000 02/01/2016 Z ServerTime

  
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  This issue is beyond the scope of this site which is for the consumer to related issues.

  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

  http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

  http://social.msdn.Microsoft.com/Forum