uninstalled old, impossible to reinstall silverlight does not have a valid windows packet

Similar Questions

• When itunes download get the error, does not have a valid digital signature that verifies the publication server

  I can not download itunes. I have windows vista.  I get the error message: does not have a valid digital signature that verifies the publication server

  Hi klofcc,

  1. are you able to download and install other applications without any problem?

  2. What is the full error message?

  I suggest that you try the steps from the following links to the article and check if it helps:

  Problem installing iTunes or QuickTime for Windows

  I hope this helps.

• Partition table does not have a valid system partition

  I am working on a Dell XPS 420 computer for a customer.  She has Windows Vista installed on it (not sure what version of Vista).

  He's doing a loop, wherever it loads to the point where I can see the bottom and the mouse, but it stops there.  After 5 minutes of him sitting on this screen, it restarts, I can't access one of the Advanced menu F8.  I tried Safe Mode, and after that it loads the crcdisk it restarts, it does with Safe Mode, Mode safe mode with networking Mode and safe mode with command prompt.  I can't use the last known configuration because it will just try to load and eventually restart.

  Things I've tried is that I ran a diagnosis of hard drive and memory, and they both pass.

  I tried the repair with the regedit option and load the system hive in the registry.

  I tried the bootrec command.

  Well I put in a disk for Installation of Vista and choose the repair option.  I did the auto diagnosis and repair option (first choice I think) and I checked the report after he finished saying that it fixes itself and needed to restart (which he did not in fact)

  Well the result that came was that the Partition Table does not have a valid System Partition.

  I tried the bootrec command, and they all said it has repaired but it did not, when I tried to do the bootrec /rebuild he gave me the message "element not found".

  I ran a test diagnosis system and I received the following message

  System test
  error code 0146
  Msg error code 2000-0146
  MSG HDD 0 - self-test log contains previous errors. Given the code and can be used by the support message technology guide to help diagnose the problem.

  be honest, I just need to know if I need to replace the hard drive or not, it's for a customer.

  I did not see if the HDD is set to AHCI or SATA in the bios again, but I will when I get home today, but I would like some answers backup.

  Hi countryboyofal,

  I suggest that you contact Dell support for the outcome of the diagnostic system.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I unlock an executable of mcafee, who does not have a valid digital signature.

  Whenever I have download their software on their Web site, the installation does not complete because windows detects and blocks the executable of Mcafee, because it doesn't have a valid digital signature to verify the Publisher.   Is it possible that I can temporarily disable on my PC and then proceed with the installation of mcafee.

  Whenever I have download their software on their Web site, the installation does not complete because windows detects and blocks the executable of Mcafee, because it doesn't have a valid digital signature to verify the Publisher.   Is it possible that I can temporarily disable on my PC and then proceed with the installation of mcafee.

  Frankly - uninstall McAfee and use something else.  There are several free options that are as good, if not better.
   
  My suggestion:

  Get rid of McAfee. Anything and everything that made by McAfee.
  Get something else for free (not some manufacturers of ISP/computer getting a rebound) and probably less resource intensive with better results all around.

  Regarding AntiVirus - free are very good: Avira, AVG, Avast

  You could spend ~ 60USD during two years of eSET NOD32 AntiVirus (not more - just product AntiVirus) and which would be more worthwhile.

  In your case, here is what I propose...

  Choose one product other than McAfee or Norton. Get it.

  Uninstall McAfee stuff (use their removal there tool.)

  After a reboot - install your new product and update after the installation.

  Run a full scan with it.

  Then - just to make sure you started on the right foot...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

• Windows7-USB-DVD-tool does not have a Microsoft Windows XP/SP3 ISO

  I am trying to create a bootable USB key to reinstall Windows XP with Service Pack 3 on my laptop Dell Latitude D820 that seems to have a CD player fault. I used a Microsoft technet subscription to download the ISO of Windows XP with SP3. I downloaded and installed Windows XP with SP3 Windows7-USB-DVD-tool but when I select the ISO file, Windows7-USB-DVD-tool tells me that this is not a valid ISO file. I'm guessing that Windows7-USB-DVD-tool is designed to install only the ISO files that have been purchased via the Microsoft Store, which is the case, I downloaded Windows7-USB-DVD-tool of.

  I've tried other tools and programs to create a bootable USB key with the ISO image, but the USB resulting either don't start completely or the tool used a format boot of Linux which does not the Windows Installer to run.

  Hello

  The tool seems to work only with some ISOs, so I suggest you try to download a Windows ISO from one different location other than TechNet.

  Hope this information helps.

• Entering the serial number for Adobe PS 7.0 does not have a valid serial number

  I installed Adobe Photoshop 7.0. I just want to register the product. When I go to the plans and products and add the serial number I have, it tells me that the serial number is not valid. How can I register Adobe PS 7.0?

  The oldest inscription in my account is for Photoshop CS2. I bought Photoshop since 5.0.2 and when Adobe converted the registration page, CS2 (2005) is cut off.

  If something as old as 7, they do not take recordings more.

  Gene

• How to install updates that does not have install for Windows vista

  Update KB 3178034, KB3167679, KB3177725, KB3175443, tried to install, but failed. It is a windows Vista Home Premium 64-bit operating system. These updates can be installed and how?

  Windows Vista is still a usable operating system?  I'd appreciate any help.

  Try the following: KB3185911 to install it manually.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53697

  The preinstallation is required for Windows Update works correctly in September. KB3177725 has been replaced and will not be offered again. If others should fail this time, there are options available to install manually, too.

  Best regards, VZ

• Not having does not have access to Windows Update online...

  So, I had an empty shell and a spare hard drive. I installed windows on a 30 GB FAT32 partition. I have restart it, install the network driver after looking on the net for a few hours by another machine. Go to intel, download the chipset drivers and those install and reboot.

  When the computer is fully booted, I access "Windows Update" link on the start menu, and it brings me to this support page.

  Well, when I installed windows it was SP2, so I download the SP3 from another part of the Microsoft Web site and installed.  Now, the computer will download the recommended updates, but I still can't access the Windows Update, or Microsoft Update page page. That's why I can't install optional updates or update driver audio microsoft provides for this motherboard.

  Is there anyway to access one of these sites, so I can download optional updates?

  After researching the web once again, I found that the windows update agent here.  After installing it, I could once more access to Windows update and install Microsoft Update.

• My CS3 does not correctly install on Windows 10.  Is there a solution?

  My CS3 does not correctly install on Windows 10.  Is there a solution?

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

  HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

  Please return to the message sent to you.

• Update for Silverlight does not install like Silverlight is corrupted and I can't uninstall it

  Original title:

  Hello
  I tried to update Microsoft Silverlight from Windows Update is showing this update "KB2690729". The problem seems to be that Silverlight is damaged on my computer and no updates can be installed correctly. I tried to uninstall silverlight, but even once the uninstall is altered.

  If someone did a solution on how to do a clean uninstall so I can reinstall Silverlight or how to fix this problem situation, that would be greatly appreciated.

  Thank you.
  Matt

  Hello

  1. What is the exact error message?
  2. are you aware of any changes made to the computer, before the show?

  Refer to the link below.
  How to clean a facility damaged Silverlight and then reinstall Silverlight
  http://support.Microsoft.com/kb/2608523

• Microsoft Silverlight does not work

  Microsoft Silverlight does not. I tried to uninstall and reinstall it but the screen is always black without any control of player on my netflix account when I try to press play. Help?

  Hello

  1. what operating system is installed on the computer?

  2. what version of Internet Explore do you use?

  3 have there been recent changes to the computer before the show?

  Method 1:

  I suggest you follow these steps to turn on ActiveX of Netflix and check if it works.

  (a) double-click the Internet Explorer desktop icon to start the browser. Click on the Tools menu option
  (b) click on the Security tab in the Internet Options window. Click the Internet icon, and then on customize the level to start the security settings - Internet Zone window.
  (c) scroll down to the section ActiveX controls and plug-ins.
  (d) check enable for download signed ActiveX controls and run ActiveX controls and plug-ins check fast to download unsigned ActiveX controls.
  (e) click on OK to close the window and then security settings on OK in the Internet Options window.

  Method 2:

  How to clean a facility damaged Silverlight and then reinstall Silverlight:

  http://support.Microsoft.com/kb/2608523

  Method 3: If the problem persists, try to optimize Internet Explorer by following the steps mentioned in this link.

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  Hope this information is useful.

• Impossible to reinstall silverlight

  Original title: installation of silverlight

  Impossible to reinstall silverlight after uninstalling it. Tried to solve the problem through Microsoft's Web site (they offer to fix it automatically). Did not work.

  Ivonne salvation,

  1 have. what measures you taken to uninstall Silverlight?

  2. do you have a code error message when you try to install Silverlight?

  This problem may occur if an existing installation or uninstall has become corrupt.

  I suggest for the link and follow the steps in the Microsoft KB article:

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523/en-us

  Registry warning: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• Silverlight does not work in Internet Explorer 8, when I try to install it, it says the application is already installed.

  What can I do to fix this?

  Silverlight does not work in Internet Explorer 8, when I try to install it it says, the application is already installed, but it does not appear in the Add/Remove Programs dialog box. What can I do to fix this?

  Thank you for your help

  JH

  I was able to install it, I downloaded again the installation of Silverlight and it took.

  Thanks for your help

  JH