Universal time and dynamic data record

Similar Questions

• shut computer down, restarted my time and the date has changed

  shut computer down, restarted my time and the date has changed.  My date always gose for December 31, 4001.  Goin whats?

  Hello
  Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue.

• How to save a calendar I created with the photo and the dates recorded on separate pages?

  How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages?  When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page.  This is causing problems when I print.

  Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.

  (1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.

  Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.

  

  (2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.

  

  (3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".

  

  (4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.

  

  

  (5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.

  

  

  

  Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.

  I hope this helps!

• How to record a fixed time of dynamic data interval when acquiring continues?

  Hi, maybe someone has an idea how to solve this problem:

  I do the continuous acquisition of dynamic data and when I see something interesting, I would like to save some data (i.e. the last 90 seconds). I guess the first step is written data in a table? I can set up the table so that it always contains just the last N seconds (or last N points, discard the rest as the measure of the loin) so I can then save this data, for example by pressing a button (possibly without stopping the .vi, or maybe just a break it.) This last step is not necessary)?

  Thanks for all the suggestions!

  Hi Tomaz79,

  You can generate as a black box on an airplane. You can initialize an array with the size of your 90 s write all data in this table by crushing at the specified index. With Quotient & rest, you will get the correct index for the next value. If you find your compelling value, you can be sure you'll get the last dry 90.

  Mike

• build a dynamic array to an array of 1 D of waveforms 4 graphics, including time and all data information

  Hallo!

  I tried to put entries generated in a table with the current value of the time stamp in the first column and the data of a table 1 d of waveforms of 4 cards in the other 4 columns.

  I have some difficulties to match the data in the table. I ve simulated the code I've written and I see that the time stamp but I ve got none of the values of data in my table. I want to ask you what you think of my code and how can I achieve my goal?

  Corresponding VI is attached below.

  Thanks in advance for the answer.

  I think you're looking for it.

• Connection of door AND dynamic data

  The program compares a thermocouple readings to a constant. The superiors are introduced into a door AND exits. However, if one of the inputs can be connected in dynamic data at the port of entry of the door AND. When the same data of the other DAQ is sent, it gives an error. Interchanging the ports also gives the same error.

  Can I use a Boolean Dynamics to the converter so to counteract this? The output of the gate AND then entered the port of exit DAQ.

  Thank you.

  Hello

  try something like the logic shown in the attached photo.

  Let us know if that's what you're looking for.

• Ice, liquid and dynamic data (modules and applications) - just a suggestion

  Hello!

  It is a position of more suggestion rather than a discussion message. I'm not sure that having placed in the right area, so excuse me if I don't.

  1. I was very happy to work with liquid to display things when a user is logged on and stuff so that it was not. Until I realized that my site in full could not be editable through the ice, because I used all liquid through the site. Liquid is amazing, but it would be more surprising if it can work with ICE. Is this something BC have in mind for future versions?

  2. it would be so great that ICE would allow my clients to edit blog, products, applications, and data FAQ. I think you must have a glance, that Webflow people do with their CMS. Their CMS allows people to change static and dynamic content with an interface similar to ice BC plans to implement a similar feature in the future?

  Thanks for reading this,

  Diego.

  While BC is working better and more recent versions of ice and I'm sure will better work with the new features of British Colombia as a liquid, due to the nature of the liquid and the coding side Server with conditional statements and complex solutions, you can create - with ice you can pretty well bet that he used to be able to support what your specifically ask in all cases. Keep this in mind.

  With more capacity edit on other things - I am course will be in future versions.

• set timing on (just need time and no data)

  is anyway to get the time from a sql instructions for how long it works... just the time data only... not... I know using "set"timing"on" on sqlplus... it gives me data + time... but I'm looking for only sometimes... need that data... which option to use? As the use of SET AUTOTRACE ON STATISTICS it gives me the stats with no plans to explain... I need something where I just need time... and not data... . How is that possible?

  SET ON TIME
  SET TIMING ON
  SET TRACEONLY AUTOTRACE

• Generate reports of problem: Long time and no data

  Hi all

  Please, I have a problem when generating a report. My report has 22 views and dashboards. Before I could generate without waiting too. Now it takes so long, and the content of all of the dashboards that isn't shawing (no data).

  You have an idea why is it like that? For more information, all the values in the vROPs VM are genrally good. Just the IOPS virtual disk are up to 362,63 IOPS / s.

  What I have to restart the virtual machine?

  Thank you in advance.

  Only slowness is the generation of reports. I tried everything, as to uncheck CSV format, excluding the dashboard... it takes too long until I restarted the master node and data nodes, while everything was ok.

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• My date and time to start going backwards in time and years. I have change and new commissioning the same thing happens. __ __

  I have a windows xp program. I did a reinstall System Saturday and it does again. My anitvirus and spy programs are up to date. I did a full scan on my computer at the same time and nothing came. I recently added explore 8 - does this have something to do with the problem. I installed today... but the problem of the time and the date has been going on for two weeks. How can I fix this problem?

  Replace the small battery on the motherboard. If you have a desktop computer, it's very easy to do. If you have a laptop, take the machine to a competent local computer technology, not a BigComputerStore/GeekSquad type of place.

  How to replace the CMOS in your PC battery - http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
  How to replace the CMOS battery - http://www.computerhope.com/issues/ch000239.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• How can I get rid of the square with the time and date in which pops out all the time and also the thing aside

  Would like to know if there is a way to get this huge place with date and time to turn off my computer and also the side thingy that comes out all the time and the date and time... it is frustrating to do something on my laptop and all of a sudden here they come out and I can not do a thing until I get them to go back whence they came there at - it a path to delete or if they are not all the time I don't really care for windows 8... Windows 7 was fine with me... not sure what to do thank you for your help frustrated

  What a kind screensaver which is scheduled to start after one minute of inactivity?

  What has happened since the first day?

  Another program or process is causing the problem, what happens if check you mode safe and a clean boot to see if you can find the cause?

  How to start Windows 8 in Mode safe
  http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, rather than your current user, you have the same problem?

  Any chance of linking to, or provide a screenshot of what you see?

  How i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/feedback/forum/feedback_other-na/how-to-insert-images-in-MS-answers/94a5cb36-A21F-4A6A-B266-611cf6c910c8

  How can I insert a picture in a reply to a message
  http://answers.Microsoft.com/en-us/feedback/forum/user/how-do-i-insert-a-photo-into-a-reply-to-a-post/17a15382-c587-44BB-9594-c0673c8402af

• Update of "last Web site visit Date and time" in the Contact record

  Hello world.  I want to see if I can find a way to write a program that will automatically update the field "last website visit Date and Time" in the contact record Eloqua and if they have a SFDC ID drive, push this stamp to SFDC.  I do not make a rule to update or something that will allow me to transmit the data of visitor correlated in good contact record.  Any suggestions?

  Thanks to Pierre in customer support, we now have a solution for this.  The User Guide for the database management (page 28) has a way of creating a progressive input signal to a program that will update web visitor info cross-object of the contact record.  My program is running and works perfectly!

• dynamic date and time

  Hello
  
  I want to display the current time and date on the homepage of my application. I used the method to_char(), but time is not updated dynamically. Any help
  
  Thank you
  Kumar

  Hello
  If you want to display a clock ticking, I would use a flash animation that does that, I guess that if you search the web for 'flash digital clock' or "javascript digital clock" it will return results dozen...

  for example, the first one I found:

  http://www.ricocheting.com/JS/digiclock.html

  Flavio

  ---------------------------------------
  http://oraclequirks.blogspot.com

• Dynamic Data in Array - time values

  Hello

  It's me again.

  I have read the lines of a lvm-file and save it in a table by using dynamic data type conversion. The first column, I have in the file is at the same time; I wish I had the time as the first column of the table too, but I couldn't find how to do this. I found this thread , but I think that I can not use this way because I read the unique lines and treat...

  The attached picture should show how I mean this. So, is it possible to get the time (from file) as a column in the table?

  Thank you

  mkrtwo

  Hello

  I'm afraid, because most of us never use screws express, you can have a hard time finding someone willing to get acquainted with them to analyze your code.

  My advice is to get rid of the express vi (not just because you'll get more responses ).

  Using the palette file I/O, and then something like string from picture to picture the range of string to convert your data into a 2D array can give just the output that you want.

  Best regards Florian