Unknown points in the text.

Similar Questions

• When typing text cursor suddenly jumps to a point in the text already entered. Use Ctrl Z to recover. How to stop this?

  When you type text, cursor jumps suddenly to a point in the text already entered.  Use Ctrl Z to recover.  How to stop this?

  I use Windows 7 on a Dell Inspiron.

  I recently did a "clean boot" who has cured a problem of high CPU usage, but left me this cursor jumping problem.  I have to look at the screen as I type to be aware of these breaks that often occur at random.

  Hello Malcolm,

  Yours is a laptop? If so, you're probably brushing the touchpad with your Palm or fingers. The easiest way around this problem is with an external mouse with touchpad disabled. To disable the touchpad go to control panel, Manager of devices and look under the mouse or HID for her. Then, right-click on it and select Disable (not uninstall - it will reinstall itself only if you do).

  You can also connect an external mouse and select the option for Notification of Touchpad to disable the touchpad when an external mouse is present. This setting can be found in the mouse properties dialog.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Bullet point in the text box, how the bullet point?

  I would like to have a bullet point in the text box, how do I get the bullet point when I use the Helvetica font?

  I think that it can be done if the box is configured to have Rich Text Formatting.

• Tab Leader points to the text that spans multiple lines

  I have a numbered list with large amounts of information in what is connected by points of the leader.  It's a mush very such as a table of contents or a restaurant menu (for example "name of the dish"... $ price).  My case, however, has a simple shade which breaks everything and is not explained by the conversations or documentation that I could find via search this forum and in the rest of the web.

  What happens if the leader points lead to something that does not fit on a single line?

  Here is an example:

  

  Basically, what I need is for everything between the tab (which generates points of the leader) and the end of the paragraph (when I press Enter) to stay on the right points.  Do not let my small silly example, lists, I care are very long and subject to the order of drastic change.  Certainly, there must be a way to do this, but I'm completely lost.  I considered just it winging and putting things in their own areas of text and force alignment manually through various methods.  But still there are very many content and order him will almost certainly change, so I want to keep everything in a changeable, easy to work with the format.

  Thanks so much to anyone who might have seen or advice on what to do!

  The only thing I can think immediately would be a big left indent on the model numbered with a corresponding left out-tooth of the first line end up with something like this:

  

  But I know when I played, I killed the leader of the dowry, but hey, I was clicking faster that the brain could keep up...

  Mike

• The quarters between a bullet point and the text really

  I'm sure I've done this before, but can't remember how. I have a list of bullete (ul) and would like to leave a wider space between the chip and the beginning of the text. I tried to play with the padding and margins, but which moves the text and bullet point.
  I guess that things thinking it can be done...?
  Andy

  Good read through:
  http://alistapart.com/articles/taminglists/

  --
  Concerning

  John Waller

• How can I align on the decimal point in the text box?

  I am creating a form of order and hold align the price fields in the decimals price column.  Is it possible and if yes, how can I do?

  Thanks in advance,

  Mel

  On field text properties and tab select the menu 'Options', and then set the alignment on the "right". On the tab "Format" in the text box, select it "digital" format and decimal places '2'. "

• How can I get student got points in the text box

  Hello
  
  My problem is
  
  a student has a 5 subject .is there sort of set the text boxes according to these subject.if all have topic 6 then 6 text box should appear.
  is this possible.please suggest me
  
  
  
  
  
  Thank you
  Nisha
  
  Published by: Nisha Rani on September 3, 2009 23:14

  Hello

  There are a number of topics? You can create a form on your table that has all THE topics on it and then use a setting of Condition to hide the ones you don't need.

  Andy

• IntelliSense / auto complete to the point of the text box?

  Hello
  
  How can we incroporate intellisense or full auto in the text box of the Apex?
  
  Kind regards
  Benz

  I have an example here:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:178

  However, it must be tuned in order to work properly.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Why the menu highlights color does not cover the text?

  Hi, for some time now, creating DVD menu highlight color (all that I choose) was not completely covering the text and looks bad. I have attached a screenshot. The menu was created in Photoshop.

  Thanks for any help

  seanw14574285 wrote:

  Hi Neil, I also thank you for the answer. The ratio is 1300 x 720 (I thought it would be 1280 x 720, but that's what he showed me under the size of the image).

  The highest point is the text, if it is the result of doing what I described in my response to Stan. Right click and select the text, then 'object', "convert to button" allows me to import psd. When you talk using an icon instead, can you give me an example? Does that mean that I could have the text in the chart, but create a circle round beside him in photoshop or similar then convert that circle to a button in again?

  Hiya Sean.

  First problem is the size of the beast - 1300 x 720 is not good for the DVD, nor is 1280 x 720 - you need to 720 x 480 (NTSC) pr 720 x 576 (PAL).

  NTSC widescreen turns a pixel aspect ratio (PAR is something different to the resolution of the image) of 1.2121:1, PAL around 1.4: 1 so the pixels are not square to start by - they are stretched (aka "anamorphosée").

  This will distort the text from the beginning, and if the background uses also text with a climax as the overlay so no one will be the same.

  I gave up with the text for the buttons a return long (it will work in Blu - ray the nature of square pixel addition 256 colours allowed for buttons) because the limit of 3 colors of the subpicture select Layer (the image of the button real itself) really means that at best all overlays of text button will be shredded. I often use a pixel 8 by 4 pixels rectangle, drawn in Photoshop. This seems to properly size.

  Your description of the process is approximately correct in yet. It should work.

• predefined text will not apply - it asks me to return, but after that the text is not performed?

  Hi, im a horrible time with text presets.

  I am trying to add a blur text evaporate pre-set to my text layers.

  I dragged and dropped the preset on the text layer, and it seemed that it was necessary to make it as if a change was applied-it. but after that rendered nothing happens to the test, no changes have actually been applied. no error message appears and I can't find an answer to this anywhere.

  any help would be greatly appreciated!

  Ive attached a screenshot of what it looks like. in the screenshot I've dragged him evaporate preset above the layer, that is why this article is not green up, but even after that I return however, the text has no effect as if nothing has been applied.

  

  Edit: ive found if I double click the preset, it sends the white words and I can't make it visible? I'm so confused.

  You might have added the preset to an incorrect point on the text layer?

  The preset adds keyframes for the text in the current-time indicator layer, animating the range selector in a band called "evaporate facilitator" to compensate for the value of the scale/opacity/blur

  Move keyframes to the start & end time desired can give you what you are looking for.

  I don't think that there is no color change in this preset.

• How can I associate with the text in a page, it goes to the top?

  Hi all

  I have two columns; The first lists all links, i.e. delivery information, how to measure, rates, etc.

  I have the second column's answers to these questions.

  I have been using an anchor that will take the user to the point of the text. But now I want every bit of text appears at the top of the page.

  Is this possible?

  Thank you

  Here is a text at the top of a page

  ...

  This is a link that allows to scroll the page to the above paragraph

• Is there a way retroactively copy all the text highlighted?

  I pointed out the text in a pdf document without activating the function "copy the text selected highlight... ». Is there a way retroactively copy all the text highlighted?

  Yes, it is possible to do it with a script (in most cases). I'll send you a PM with more details.

• How to display database records in the text element

  Hello friends,
  I use forms6i...
  I called "username" in the layout of text editor. I created this point in the text of the data block Wizard... I put the number of items displayed = 3 in this wizard...
  In the 'user name' property palette I have following changes
  Number of displayed items = 3;
  
  When I click on the button named "list_user" must watch all the user names in the text element...
  My shutter button pressed when code is:
  
  
  declare
  cursor c1 is
  Select Logid log1 where logout_date is null;
  Start
  Open c1;
  Fetch c1 into: name of user;
  end;
  
  But my problem is when I run the user a single form displayed in the text element... The text elements two remaining are have no data...
  
  The result of the cursor query is:
  
  
  
  SQL > ed
  A written file afiedt.buf
  
  1 Select logid log1 where logout_date is null
  SQL > /.
  
  LOGID
  --------------------
  104
  105
  106
  
  
  Please help me
  
  Published by: Bauer on February 23, 2011 01:45

  1.
  There is no loop in your code, so it stops after the first extraction.

  2.
  with each loop you overwrite the same text field. Add CREATE_RECORD:

  DECLARE
      CURSOR c1 IS
          SELECT logid
          FROM   log1
          WHERE  logout_date IS NULL;
  BEGIN
      OPEN c1;
      LOOP
          IF :username IS NOT NULL THEN
             CREATE_RECORD;
          END IF;
         FETCH c1
         INTO  :username;
         EXIT WHEN c1%NOTFOUND;
      END LOOP;
  END;
  

• Copy the text in the pdf format gives me gobbledygook. Is there a way to OCR to correct?

  I have some documents that are complete gibberish when I select the text and copy. If I open them in Acrobat Pro, select text, copy and "Show clipboard" in the Finder, I see a lot of 'skull characters', and if I open them in the preview and do the same thing, I see strings of points. The text in the Clipboard may not intelligible stuck being in any other program, and I can't find the document.

  Some of these documents were downloaded from commercial sites. One of them is from (I think) OCR'ing has scanned the document using ClearScan. An example of such a document is at https://public.me.com/ix/alanterra/Reynoso%202006%20p%201.pdf?disposition=download+1317001 233647 (small, 55 K).

  It seems to me only one way to do this is to convert the document into a "scanned" pdf, then OCR it. But the only way I can understand how this is the image of each page separately in Photoshop and then assemble the pages into a new document.

  There must be a way to solve this problem.

  Any thoughts?

  A

  PS - If you look at the document linked to above, you will notice that the text in the footer is consistent, but not the text in the body of the document.

  You will be able to use the OCR in Acrobat after you convert the outline type. You will need to add transparency, then use the Flattener Preview to expose your type. Here are the steps (for Acrobat 9):

  1. the document > watermark > Add (add a text watermark, press the SPACEBAR once).

  2 advanced > Print Production > overview of flattening > convert all text to outlines text (box). Record.

  3. the document > OCR text recognition > recognize text using OCR. Select all text with the text tool, copy.

  This method is not perfect, you will need to check the copy to find errors.

• Get the position of the text (inside or outside a nightclub?)

  Hi all

  I use simple Ruby to access the contents of a PDF file. This help PDF Reader of yob of GitHub.

  Now, I've come a long way, but still have a question that remains! How to get the position of a text object (this object area)?

  I read the PDF reference, he told me all sorts of things on the text area, space glyph and user... As English is not my mother tongue, there is a lot to take... I currently have a Community trade mark, a matrix of text and text rendering matrix. I have also all the boxes on the page (media, trim, culture etc..)

  For an Image object, I use the values of e and f CTM as x and y. It works perfectly, but when it comes to text, seems to be missing something...

  Example:

  CTM: Matrix]

  [1, 0, 0].

  [0, -1, 0],

  [-0.0, 640.346, 1]

  ]

  Text matrix = > array]

  [10.0, 0.0, 0].

  [0.0, 10.0, 0].

  [2062769.1732, 42.6732, 1]

  ] == You need to convert the text in user/device space space!

  TRM: Matrix]

  [1000.0, 0.0, 0.0],

  [- 10.0, 0.0, 0.0].

  [2062769.1732, 597.6728, 1.0]

  ]

  I can count the lines and calc a displacement of multipling that number by police in size (e.g. 12 pt), but how can I get the box of you text_object? If I have the box, I can make you whether he fits in a box...

  Please help with what I might hurt, or even better if you can help me to find the position of the text!

  They are NOT the starting point of the text box.   It is the basic position of the pen, taking the place of drawing the text.  The 'box' versus relies on measures of fonts - what you need to get the widths, leader, etc.  There's a picture of this in the ISO 32000-1 standard (section 9.2.4, I think).  In fact, the entire section text will make this clearer.