predefined text will not apply - it asks me to return, but after that the text is not performed?
Hi, im a horrible time with text presets.
I am trying to add a blur text evaporate pre-set to my text layers.
I dragged and dropped the preset on the text layer, and it seemed that it was necessary to make it as if a change was applied-it. but after that rendered nothing happens to the test, no changes have actually been applied. no error message appears and I can't find an answer to this anywhere.
any help would be greatly appreciated!
Ive attached a screenshot of what it looks like. in the screenshot I've dragged him evaporate preset above the layer, that is why this article is not green up, but even after that I return however, the text has no effect as if nothing has been applied.
Edit: ive found if I double click the preset, it sends the white words and I can't make it visible? I'm so confused.
You might have added the preset to an incorrect point on the text layer?
The preset adds keyframes for the text in the current-time indicator layer, animating the range selector in a band called "evaporate facilitator" to compensate for the value of the scale/opacity/blur
Move keyframes to the start & end time desired can give you what you are looking for.
I don't think that there is no color change in this preset.
Tags: After Effects
Similar Questions
-
Original title: user profile
My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button. I ran a virus scan and spyware scan in my user admin profile and he has not found anything. I don't know what to check.
Hello rhunter15,
There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.
First of all, we run System File Checker to see if you have a corrupt file system.
- Click Start
- Click on all programs
- Click Accessories, and then right-click on the command prompt.
- Select the Security tab and choose "Run as Administrator"
- Click on command prompt
- Type SFC/scannow.
It will scan and repair any damaged operating system files.
To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem. For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.
KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
http://support.Microsoft.com/kb/929135Once you have finished the clean boot, check again and see if you get the error of parental control.
If please post again and let us know if that helped pinpoint the problem or if you still need help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10
Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support
-
Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages
the printer is not the shades of grey even print cartridge is not yet empty
y at - it software for hauler color printing?
Thanks for your comments
Hello Nilsvolkel,
Thanks for the reply.
I'm sorry for the late reply.
I appreciate your patience and time.
Do not require any special software.
However, you can use the steps in the following articles and check.
Reference:
http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7
Please keep us informed.
Thank you
-
After that the upgrade of os josemite cs4 applications will not work. Message that I need to install the legacy java SE 6 runtime. Is it necessary to set the loading application?
Found the answer:
Java for OS X 2014-001 includes improvements to the installation and replaces all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.
installed above and it works now
Blessings
-
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
-
IR remote stops working after that the system will switch to standby
IR remote no longer works after that the computer goes to sleep. I use Windows Media Center (Vista) to the TV and use the remote a lot. The ONLY way to make it work is to restart the machine, which is a PITA.
In the device, here is what is displayed Manager...
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works. It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.
Any ideas? Help, please.
BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.
Here is the official Microsoft fix for error code 38:
Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspxHave you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?
You can ask your question to the Media Center experts at the green button forum:
Have a Word with the help of HP to see if they have a fix for the same.
-
I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac
Hello
Please see connect and disconnect activate Cloud Creative applications
Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors
Concerning
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
I am a new Member of the CC. When I downloaded the CC installer asks me to connect, but following that there is no icon 'Apps '? I can't find so one of the applications that I signed up for download. I spent three hours with a representative of working by remote customer support, but still no advance. No display software in the laucher CC if anyone else had this? And how it was settled? -cheers - Philip
-
Satellite L305D-S5934 Pro - keyboard will not perform a double click
Hello
I have Satellite L305D-S5934 and the keyboard does not work properly. I can use the keyapad to point but it wll not perform a double click. Left click will not work... I think it's a hardware problem, I have tried resetting everything and downloaded synaptics at least 3 times.
Anyone have any suggestions?
It does not work with a USB mouse. It is still under warranty, but the agent wants to keep my laptop for 6 weeks to fix while they get a part starting from the United States. and they don't test it for me for free so I'm not even sure this is harware related to 100%?Hope someone can help me, thanks
Hello!
Do you mean before the touchpad mouse left button or tap on the touchpad function?
The listen function must be activated first. This means click on the left button of the mouse TouchPad.
Go to control panel > mouse > device settings > settings > Tapping. There you can check if the function is enabled or not.Good bye
-
After that the cc2015 effects will not link to bridge cs6
Ive just downloaded the demo version after effects cc2015, but it will not be a link to Bridge CS6, he tells me his is not installed.
However I can use Adobe Bridge as a standalone and use also go in Photoshop, can you please help... Thank you
That should pretty well. This kind of thing is always dependent on version.
Mylenium
-
G72-250us: will not perform the system recovery
After completing the formatting and by copying all the files on the three disks that I made, the recovery program sees no bootable device when restarting. The original hard disk drive (320 gb) cooked and I replaced it with a 250 GB ssd. Ant help or explanation would be appreciated.
Hi there @caper84,
Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the system recovery. I'll be happy to help you.I found a lot of documents for this problem. Here are some help.
Troubleshooting problems of recovery HP System (Windows 7)
System recovery can fail or display error messages (Windows 7 or Vista)
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
Service Pack 1 will not install after that the pc has been reset to the factory settings
At my pc reset due to problems of crashing and freezing factory settings, when turned on after resetting received masses of updates Service Pack 1 has not been installed, but it shows in the story as being successful. He reappears in the form of waiting for update installation, but when the terms & Condtions accepted the installation takes a few seconds, history shows successful but it has not yet installed. So I can't install SP2 to update Internet Explorer 9
Hello.
Thanks for the reply. I found a previous question with a similar problem as mine, there was a solution that I followed and was able to install SP1. I should have done this before my question!I also installed SP2. Resetting to the factory settings was a last resort due to a problem I was experiencing, but after installation of SP2 my original problem reappears. The problem is now in terminal phase and looks like a new pc.In any case, once again thanks for your help, I know where to go with future questions I have.John -
Title: Computer Reset of origin?
I just bought my computer a few weeks ago. I ended up buying a virus protection. which was a virus itself. I spoke to a support Member and he used the microsoft safety scanner. now, when I click on a link on my desktop, it pulls up a window saying I need to choose a program to open it. Anyway is to restart my computer to its original settings, it was when I bought it?
Hello
In the two next messages are methods to further check for malware that should be (and I mean
which) and methods to protect the system.Check with your system manufacturer support, their drivers and documentation online and ask for their
Forums (if any). The system can be restored to the rear out of the box state that eliminates course
all programs and data so data first. Each manufacturer has its own methods, although it is
usually not a complx process.=============================================================================
Try this first:
To run a program use start - search and type the name of the program such as iexplore.exe
to run Internet Explorer - Explore.exe runs Windows Explorer - you may need to use the path to
those - If yes type the full path and name in the search box.InterNet Explorer
C:\Program may Explorer\iexplore.exeWindows Explorer
C:\Windows\explorer.exeYou can use Windows Explorer to access any program and double-click it to run until you get
This problem is corrected.--------------------------------------------------------
To restore the ability to run any .exe programs.
1 make a Restore Point so that you can come back if necessary back although probably not required.
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html
2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
Click on it and FUSION - REBOOTDO NOT COPY THE LINES
-----------------------------------------------------------------Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\. [EXE]
@= "exefile".
"Content Type"="application/x-msdownload".[HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
@= "{098f2470-bae0-11cd-b579-08002b30bfeb}".[HKEY_CLASSES_ROOT\exefile]
@= "Application".
"EditFlags" = hex: 38, 07, 00, 00
"FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\DefaultIcon]
@="%1"[HKEY_CLASSES_ROOT\exefile\shell]
[HKEY_CLASSES_ROOT\exefile\shell\open]
"EditFlags" = hex: 00, 00, 00, 00[HKEY_CLASSES_ROOT\exefile\shell\open\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shell\runas]
[HKEY_CLASSES_ROOT\exefile\shell\runas\command]
@="\"%1\" %*"
""IsolatedCommand"="\"%1\" %. "[HKEY_CLASSES_ROOT\exefile\shellex]
[HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
@= "{86C86720-42A0-1069-A2E8-08002B30309D}".[- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]
--------------------------------------------------------------
DO NOT COPY THE LINESIf necessary:
Check the fix of exe here
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.htmlOr here:
http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/Also check this one if it applies
http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.htmlHow to set default Associations for a program in Windows 7
http://www.SevenForums.com/tutorials/2630-default-programs-set-programs-default-associations.htmlHow to change the default program opens a file Type in Windows 7 http://www.sevenforums.com/tutorials/12196-open-change-default-program.html
===========================================================
If necessary after the foregoing:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlIf necessary, you can try a repair Installation that allows to maintain the programs and data, although redundant
backups are always a good idea. (This will not help if you have not done the above.)How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Maybe you are looking for
-
Photosmart C7250 AIO: Fax number in the fax header change
How can I CHANGE the fax number in the header of the HP Photosmart C7250? When I go to settings and select Fax header Configuration, I get the screen to enter the text for my name, and then click OK and the fax number is displayed, but there is no wa
-
HP pavilion 1106er g6: hp pavilion g6 1106er error
After reinstalling the operating system after installing the drivers for the video card out a bug, AMD driver nepodhodit, 3 months can not solve this problem, pereustanovuka older version of the driver does not work, ask for help)
-
My sustain pedal works exclusively with B3 organ sounds. (Neither X Pro Logic and GarageBand). Thanks for the help
-
Order of execution within the fieldChanged()
In the following code example, the EditLead() function is executed at the same time as a dialog box that displays above it. However, I want the dialog box to appear only after that I left the EditLead() function. Any help will be greatly appreciated
-
BlackBerry Smartphones Yahoo email
I just upgraded from the BB Pearl to curve... am about to make all upwards... I was wondering if there is anyway that I can set up e-mail on request? I don't want all my Inbox from my PC sent to the BB... only if necessary. I could understand this (?