Unknown problem during the instalation of windows 7. __

Similar Questions

• NTOSKRNL.exe problem during the startup of windows xp on a dv5000i Pavilion

  Hi all!

  I have a Pavillion dv5000i

  I get an error message mentioning a NTOSKRNL. Order EXE corrupt during the startup of windows xp.

  I can't boot from a disc XP system either.

  Could this be a HW problem?

  I've extracted the original HD and put it in a usb interface

  I can read it without problem with another PC (so the HD should not be the problem)

  Thank you all

  Kind regards

  Gino

  NTOSKRNL is a software, and it must be there for the machine to start.  The recovery discs should fix this.

• Problems during the upgrade of Windows 98 Service Release 2 for Windows XP Professional Service Pack 3

  Well, I have an old Dell Dimension that I wanted to use and I decided to upgrade from Win98 to WinXP Pro.

  In the process as soon as I start the upgrade process it gives me an error message"
  " Error 589FF5Ch" I checked around the Web sites and found nothing.

  If no response would be appreciated.

  E-mail * address email is removed from the privacy *.

  Thank you.

  Dear God. I can't believe how much a long time ago, I asked this question. Over 2 years later I see something in my Inbox (right now). Honestly, I know more ask this question.

  And more now, I would say try the upgrade to Windows 2000 if you happen to have a product key. Then go to Windows XP. If not, is it possible to restore Windows 98 updates? Perhaps the latest edition of Service causes a conflict with the upgrade. You be left with a clean cloth. I'm curious, that you still have a machine running Windows 98? What is the material/specs on this platform? I can't believe anyone is still out there running old technology like this to use out of it.

• MY PROBLEMS DURING THE UPGRADE TO WINDOW 10

  I received a notification to upgrade Windows 7 to 10 of the window. In may 2016, I started the process. I followed as a result dialog boxes that Windows 7 and downloaded Update window 10. Beginning of June, my PC me notified to the installation of window 10. When I clicked OK, a dialog box informed me that my PC will reboot several times.

  When he completed the first 100% and continued with another level of installation, to 32% he is static up to 3 hours when I noticed that my laptop batteries becomes excessively hot. I then turned off the batteries. When I powered up the PC again, it began to recover my Windows 7. From there he was showing me that my windows 7 is not genuine.

  Now I couldn't restart the upgrade from window 10.

  The PC is my desktop PC and I can't access the product key of window 7 for use in a revalidation. What should I do to get out of the mess.

  Not wise to interrupt an upgrade

  You even need to create a system image on a removable hard drive?

  Anyway now you will need to contact M$ using the activation of the phone and communicating with the manufacturing of the machine to sort the invalid license.

• Problems during the installation of windows on Satellite L40

  my laptop toshiba satellite L40
  model No. PSL4CL-001001
  series X7061289R

  while I have install windows xp, it says that my hard drive not found...
  for windows vista, I also facing the same problem...
  I know that I have I need of the driver for this laptop...
  but where can I found it?

  I have not the driver or the ultilities... because his second hand trade...
  can anyone giv help me?

  Thank you...

  OK, first, all drivers and utilities you need can be found here: http://eu.computers.toshiba-europe.com (Support & downloads). Choose your laptop computer and operating system.

  Windows tells you, it does not find your HARD drive because of the lack of SATA drivers. They are in the Matrix Storage Manager intel, which can be downloaded on the link above.

  How to use this forum just use search function driver, but you have two options. Put them on floppy or integrate them into your installation via the tool called nlite disc.

• Problem during the upgrade of Windows 10 via Windows Update.

  I am currently using a Genuine Windows 7 Home Basic OS.

  When I was upgrading to Windows 10 via my Windows Update, download of the updates with 99% , then he started again to 1%.  What is the problem?

  Although, I downloaded all the important and optional updates before moving on to Windows 10, then also what why? How to fix it?

  Help, please!

  Thanks in advance.

  Hey,.

  If you get 10 Windows via get windows 10 app, you always can ISO to upgrade.

  Download Windows 10 media creation tool

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• Unknown devices during the upgrade to Windows 8.1 on my Envy 15 t-j000

  I've upgraded to 8.1 Windows, but my Envy 15 t-j000 shows 3 mistakes of devices in the section "other devices."

  They are as follows:

  PCI device (location: bus 9 PCI, device 0, function 0)

  PCI\VEN_10EC & DEV_5227 & SUBSYS_1963103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_1963103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00

  Unknown device (location: on Microsoft ACP-I compatible system)

  ACPI\VEN_HPQ & DEV_6001
  ACPI\HPQ6001
  * HPQ6001

  Unknown device (location: on PCI Express Root Complex)

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  Anyone know how I can udpdate drivers for these devices?

  Thank you

  Hello:

  Here are links to the drivers you need:

  PCI\VEN_10EC & DEV_5227:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123976-1&cc=us&DLC=en&LC=en&OS=4158&product=5388047&sw_lang=

  ACPI\VEN_HPQ & DEV_6001:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=5388047&sw_lang=

  ACPI\VEN_HPQ & DEV_6007:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4158&product=5388047&sw_lang=

• Facing problems during the installation of windows 7 201 err0r

  I'm trying to install the trial of lightroom and facing problems 201 error

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• Blue screen during the installation of windows 7

  Hi guys, this is my first question. I have a problem during the installation of windows. A blue screen saying is displayed "STOP: c000021a {fatal system error}.

  The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 xC0000001 0x001003f0).

  The system stopped"I can't do anything else than the computer shutdown. Please help me

  Could you provide your system specifications?

  Are the upgrade from a previous version of Windows or to do a clean installation?

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Problems with the installation of Windows 7 Home Premium: ask load the driver during installation

  I am currently using Windows XP Professional Version 2002 SP3 with specification of my computer as below:

  Intel Pentium D 3.40 GHz 3.39 GHz

  3.5 GB RAM

  I tried to upgrade to Windows 7 by restarting my computer and boot from the CD. Setup goes as usual, initially, he asked for the language installation during installation, and after I clicked OK, the window titled "Load driver" had appeared with his message as below;

  "To install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK."

  What are the problems really? Because I think I have all the necessary drivers and before that everything works fine. Where can I get the drivers? And how to solve this?

  Help, please. Thank you. :)

  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• When you save the playlist, error - "Windows Media Player has encountered a problem during the creation or recording of the reading list.".

  When I try to save a playlist, I get an error message "Windows Media Player has encountered a problem during the creation or recording of the reading list.".

  Hello

  • Will there be any changes made prior to this issue?
  • What version of Windows are you using?

  Step 1: I recommend to run the Windows Media Player settings Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Step 2: If the problem is to uninstall and reinstall Windows Media Player. Here's how.

  Uninstalling and reinstalling Windows Media Player:

  (A) uninstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find multimedia and uncheck the brand in the face of Windows Media Player.

  d. restart the computer

  (B) reinstall Windows Media Player:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the multimedia functions and place a check mark in front of the Windows Media Player.

  d. restart the computer.

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• Just upgraded PC parts and windows XP home or pro install peripheral not during the installation of windows

  Yesterday, I got a new gigabyte motherboard, ripjaws ddr3 memory and a processor AMD phenom II 1090 t edition.  During the installation of windows, it copies the files and reformat my old hard drive.  35 minutes from devices of the installation each time the blue screen appears and says that windows has been shut down.   I also had another hard disk installed my cousin gave me and I tried formatting and installing windows on that one too and did not work. Tried to install PRO then Home edition and none worked.  I tried out the video card and ram for 1 and 3 of the Bank and all switching leaving Bank 1 and nothing. Only I have the keyboard / mouse USB and video card/RAM/hard disks installed. In total, we have tried to install windows for about 2 hours and a half. .  All I have to b compatible with my motherboard and I have no idea why.  Someone please help!

  A vista 64-bit with sp1 would be ok?

  In fact I just bought windows 7 from newegg so I hope this will work lol. I saw the way to the blue screen a lot and I newegg feedback seen many people having crashes then install with new material that came out, and my computer is a 5 days old now.

• There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  Outlook has been changed from hotmail, my emails say don't link with windows media player, outlook is not their problem, but it happened only when they merged account

  I have to be able to open MP3 files that ae sent emails in my work, it's urgent, please I need to know what settings to correct to sort this please

  It comes to getting the error message

  There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  E-mail address is removed from the privacy *.

  Hello

  Method 1:

  See the article and check if that helps:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Method 2:

  I suggest also refer to the thread with a similar problem and a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-play-media-files-Windows/4abe7be7-b3fe-44eb-b4da-e0848c3c8bd4

  It will be useful.

• I can't sync Windows Media Player with my MP3 player, it says "Player Windows Media has encountered a problem during the synchronization of the file to the device".

  Original title: windows media player

  Whenever I try to download songs on my mps I do not sync my songs. Whenever I click on the button of synk sart on Windows Media Player little pop box saying "Windows Media Player has encountered a problem during the synchronization of the file to the device. For additional assistance, click Web Help. "and when I click web help it does not at all help me please someone help me!

  Hello
   
  1. with the device that you are trying to synchronize?
  2 - is the first time you try to sync Windows media player?
   
  Windows Media Player has encountered a problem during the synchronization of the file to the portable device. Because this error can occur for various reasons, there is no single solution.
  To resolve the problem, try to disconnect and reset. See your device manual for specific instructions on performing this procedure.
   
  In some cases, this error may occur if you try to synchronize a file hidden on a device. To resolve this problem, delete the file in the sync list or change the properties of the file so that the file is not hidden.
   
  For more information, see the article below,
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.6001.7000&ID=C00D1236&ContextId=211&OriginalID=C00D1179