unknown user may have reset my administrator and password of the user access.

Similar Questions

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  I have reset my laptop and I don't have the set up cd, I have the license key for vista ultimate can I download

  Hello

  "I reset my laptop."

  What do you mean by that?

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have reset my iphone5c and now its FIR asking former owners find my iphone id is all played in ways it HELP

  I have reset my iphone5c and now its FIR asking former owners find my iphone id is all played in ways it HELP

  It's the lock of activation.  Only the original owner can unlock with their account.

  Apple will only unlock it fo the original owner WITH an original receipt of purchase

• Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?

  You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:

  Check these items and follow the instructions.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• Does not Muse and BC set? I have reset my Adobe ID password, but still I can not connect to BC.

  I can't find a solution to my problem. When I was to connect to BC, I got a message the same every time. I finished my temporary site on Muse and publised in British Colombia. I wan't to publish on the Web site online, but I can't do anything because I can't connect to the home page of BC. I have reset my Adobe ID password, but it still does not work. I'm waiting for solution almost 1 week and ask each one, but I don't have any resolve. Help, please.

  There was an error processing your last request.

  Please go back , and then try again.

  
  

  Hello

  in case you still experience the problem, please check your Inbox, I sent you some instruction.

• I can't publish my web site with Muse 'unknown error. I have my Adobe ID and password. But I have an error message 'error' unknown business catalyst tell me as my word ID and pass are ok. wath so?

  I have my Adobe ID and password.

  But I have an unknown 'error' error message when I want to publish my web site.

  Catalyst Adobe and business told me that my ID and pass word are ok.

  wath can I do?

  Thank you

  The dialog in English says:

  Please enter your Adobe Business Catalyst password to upgrade your account to use Adobe ID. Once upgraded, future interactions with Adobe Business Catalyst will be your Adobe ID credentials.

  You have an old account Business Catalyst that you publish to. old accounts BC used a different connection system. Before you can post on this old site of BC of Muse, you must convert your old site BC to use the newer style connection AdobeID. You must enter your password for your old login BC, then the Muse will convert your old site BC for use AdobeID connection and you will be able to publish on your site of Muse.

• How can I add user name and password in the target of the shortcut

  I have several shortcuts that require different from the username and passwords then my logon credentials.
  I know that there should be a way to add the username and password in the target of the shortcut.

  I found several online orders, but none of them does not seem to work.

  following commands were tested:
  / u: Administrator /p:P@ssw0rd!
  u user_name-p password
  -l votre_nom_utilisateur - pw votre_mot_de_passe
  UserID = user/password
  / User UserName /pwd password
  / username username /pwd password

  Hello

  1. Your computer is on the field?
  2. What application do you need to save your id and passwords?
  3. Are you referring to online applications?

  If the computer on the domain, I suggest you contact the technet forum, where we have some support professionals who are well equipped with the knowledge on area issues, to do that please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP envy 5530: hp envy 5530 administrator and password

  HP envy 5530 administrator and password

  Hello

  Please can someone help me.
  How to reset the password for administrators
  link below shows the web page out of Im lock.

  How to reset the password for administrators

  http://h30434.www3.HP.com/T5/image/serverpage/image-ID/123490i6312F91B84AC8FE7/image-size/original?v...

  Hi @leggoman,

  I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  To reset the settings of the admin in the printers Web server shipped as shown in the screenshot you have validated, you need restore the network printer. Once restored, you must give the printer on the network.

  To restore the network settings, you will need to access the menu/wireless network on the front panel of the printer and look for the default network.

  Please do not forget to keep me informed of the result, so I can keep up with you. Thanks, I look forward to hear from you.

• I'm administrator, but do messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator

  original title: administrator problem

  I am the administrator with a password (in fact the only user of my computor) but continue to receive messages telling me that what I want to do is forbidden by the administrator and verify with the system administrator. How to work around this problem? My os is Vista Home Premium.This happens more frequently when I try to remove a program

  According to what "program", you tried to 'delete '.

  If one of these programs to the system, you will get the message.

  If it's one of those programs that you have installed from the web, try one of these programs to "Uninstall" part 3:

  Revo Uninstaller 1.91
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  IObit Uninstaller 1.1
  http://download.CNET.com/advanced-uninstaller-free/3000-2096_4-75157230.HTML?tag=mncol

  Advanced Uninstaller Free 10.1.1
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.HTML?tag=mncol

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why do I get the message "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to s?

  I have 3 windows firefox with several tabs in each, but the main (and sometimes others) gel and prevent navigation showing a box indicating
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends.

  "Script: chrome://fctoolbar841468a1d7f44bd384e6bb0f13a06c64/content/fctoolbar.js:1.
  To stop the script? I think it's not to do with Google Chrome but FF model internal to web pages. Thus, a deficiency in the FF, inability to cope, but with what? As far as I KNOW, all software is up-to-date. I have restarted FF, restarted the laptop, but has not changed the FF problem. What is the cause?

  This is probably caused by a toolbar that installs on your version of Firefox. Most of the scripts that begin with chrome:// are extensions.
  I think that this is very probably the Nectar Search Toolbar , which raises the question, because it seems to be the only toolbar installed on your computer.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• Is it possible for Firefox to remember multiple combinations of name and password of the user to a Web site?

  My husband and I use Yahoo! Mail, but each has our own account. We are constantly put in front and in back. Enter the full name of the user and the password by hand each time it's boring, but it's not fair for one of us to have Mozilla to remember the user name and password. It would be great if there was a way for Mozilla to memorize our usernames and passwords. No idea if there is a way to do something like that? Thank you!

  30 Firefox should be able to store more than one name and password to the Yahoo site.
  Firefox should offer to store the name and the password for the other institutions.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

  There are other things that need your attention.

  Note that your system details list shows several Flash plugins.

  • Shockwave Flash 13.0 r0
  • Shockwave Flash 12.0 r0

  You can find the installation path of the plugins on the topic: plugins page.

  • http://KB.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

  You can view the installation folder of Flash player for multiple Flash player plugins and delete older versions of the plugin (NPSWF32) and possibly (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

• How can I reset my "authentication required" username and password? The fields are always filled with my old information.

  How can I reset my "authentication required" username and password? The fields are always filled with my old information.

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

  You may need to clear cookies from this site, so if you checked a box to remember you.

• Select Fire FTP script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends. Script: chrome://fireftp/content/js/local/localTree.js:134

  After the last update on Firefox FTP fire does not open easily. I get this message more than once. First time I had problems with the selection of FTP
  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://fireftp/content/js/local/localTree.js:134

  Try to update your module:

  • Look for new versions of your modules

  Check and tell if its working.