Update CAN´t SRW2024 to firmware 1.2.2 without boot image "runtop_boot - 101.rfb".

Similar Questions

• BSOD flashes for only a microsecond, can not find the way to disable autoreboot without booting properly and may not start successfully

  I get at my wits end here on this one.  This morning my antivirus (AVG) wanted software reboot to continue the installation.  I put it off several times and then finally said ok for her.  Since then, I am not able to boot into Windows (Vista Home Edition, updates are on, it should be whatever the latest version is).  I see a blue microsecond Flash long on my screen after a certain point, each time, but my eyes are not enough fast to handle some error code it gives.

  Safe mode does not load in any of its iterations.  Try to repair it with the installation disc, and he informed me usefully could not find a problem.  Is it possible to either freeze the computer on the error at this point (so I can understand what the underlying problem is?)  Or do I have to have a fancy paperweight?

  Unplug all devices from your PC - printer, USB phone cables, etc.

  Try to repair the operating system using the installation of drives now and see if it detects a problem.

  Do you see an option - "Last good known Configuration" tapped "F8" permanently? If so, try this.

  OR...

  Get your hands on a Ubuntu or any other Linux distro LIVE CD.

  Start the Linux operating system using the Live CD and copy (backup) of all your IMPORTANT data to an external drive.

  Once you have done this, format your hard drive and clean install Vista OS again...

  MRI!

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• After update, can't login, just gear turns

  After that I updated to 10.11.6, I cannot connect to my iMac. The login screen accepts my password, but the gear/turn icon just wirhout everything that happens. Then I rebooted into recovery mode and reinstalled bit El Capitan, the problem persists. I am at a loss total and rather hopeless.  Help, please.

  Thank you

  John

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Impossible to update firmware on mac mini without CD

  I'm unable to update firmware on mac mini without cd-rom.

  I tried to burn iso image to USB via disk utility, but folowwing error:

  "Unable to validate the source - invalid argument.

  Can you provide iso correct or dmg that can be used with the mac disk utility as seems that I don't have a way to upgrade the ssd firmware now?

  P.S. I tried unetbootin on win and mac, tried to copy the iso contents with dd in terminal but mac still do not see my USB stick on the charge.

  After dozens of solutions on I finally took ssd at my mini mac, put it in the HP laptop with cd-rom, update firmware and restore mini. Thank you apple for sucky usb support and sandisk for silence loading...

• Software update of the Cobcern with FirmWare...

  Hello... I just downloaded and updated the installer of the firmware from the sandisk website. (SansaUpdaterInstall.exe)

  Then after I got it and reopen my player (sansa fuze) even once, I can't seen mp3 files that I copied before the Installer update. I open the music folder and it is empty, but in the player, I can see all of the mp3 files. Is - this bacause of the installer? How can I do to see the files?

  And when I re - connect to my computer, I see no internal memory. I see only two letters of SANSA FUZE G: drive and removable drive H: (SD card)

  I think that I have installed the version install evil!

  answer me someone as soon as possible please...

  Looks like you got the player in MTP mode and the update of the firmware he switched to MSC.

  Change it in settings > USB MTP mode & the player will appear as a portable device - Sansa Fuze.

  S

• How can I save BIOS Firmware on G60-243DX

  How can I save BIOS Firmware on G60-243DX

  does anyone know of a tool on the net.

  My G60-243Dx has a F.33 BIOS.  It cannot be that.  latest version of the BIOS is F.32A.

  I think that geek team at best buy, updated with incorrect firmware.

  There is no available tools to save it... and I doubt that they flashed the BIOS of your laptop with the bad because the software will not Flash the BIOS, if it does not.  As well, it probably doesn't work very well if it was the wrong version.  HP site is sometimes behind the posting of updates... service centers probably have the latest versions.

• Can I change password Firmware from another Mac

  Can I change password Firmware from another Mac

  N °

• After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.

  After the Windows 8.1 update, can not access Internet in Firefox or Chrome, but IE 11 OK.
  I reinstalled the latest firefox, still cannot access Internet from Firefox.
  Microsoft is ridiculous?

  1. Run cmd.exe as administrator
  2. Type "netsh winsock reset" and then press enter
  3. Restart the PC

• I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image.

  Hello...

  I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...

  I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...

  Help, please...

  Much thanks

  Lisa

  < re-titled by host >

  The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.

  Where do you see the message your computer?

• Calculator chart 50g. How can I find my firmware version? Thank you, johnnaben

  How can I find my firmware version?

  Thank you

  johnnaben

  I thank very much - the two methods have worked

  johnnaben

• CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  CODE 66 has when the update NET FRAMEWORK 4 with WINDOWS UPDATE can't update more far until the issue is resolved. Help, please... I almost tried everything. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Take a look at this link and see if it helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3adefda0-69f3-4075-96ee-e2c61bd599cc>

• old security updates can be removed without disturbing the system?

  old security updates can be removed without disturbing the system?

  old security updates can be removed

  NO.

  See the Shenan Stanley response to a previous post:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/can-i-safely-delete-old-Windows-security-updates/c63db7fd-bf2a-4179-9d83-981fb41ca823>

  UTC/GMT is 15:43 on Saturday, February 25, 2012

• Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

  Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

  Hi SelenaMR,

  Are you facing any problem to install updates?

  In Windows XP, it is not possible to update Windows without an internet connection.

  Windows Update uses your internet connection to find updates on the Windows Update Web site or on the Microsoft Update Web site that apply to your computer.

  Reference: Windows Update

  Hope the helps of information.
  Please post back and we do know.

• Try to change my key for XP pro, receive the message error "Impossible to update can be due to connectivity problem'

  I have a valid key for xp pro. Using the key update tool gave me a message "Impossible to update can be due to connectivity problem"(?). Now I'm going in circles trying to find a "regional activation phone number" for Orange County, Ca.After 2 hours of trying, the closest I can get is worldwide volume licensing of phone numbers.

  Hi rexstricklin,

  In addition to the post of Carey, please see the following articles on how to change your activation key:

  http://support.Microsoft.com/kb/810892

  and how to enable XP:

  http://support.Microsoft.com/kb/307890

  I hope this helps!