Update does not open
I download the correct update for my platform. He unzips and I click on the icon to launch the update, but it does not open. The icon bounces just in my dock for long time and then finally moved there, but there is no program window to talk about. Help, please.
La - 4 indicates that you have downloaded the file several times. Follow these steps:
-Launch the disk utility (/ Applications/Utilities/Disk Utility.app) and disassemble everything Flash Player installation programs that have been mounted. If you do not have the ability to remove an element, by restarting the computer will remove it automatically.
-Delete all the files in Flash Player installer you downloaded, empty the trash as well
-Download the installer of get.adobe.com/flashplayer
-Launch the installation program - it works?
If there is the same, please try the installation program offline posted at the bottom of the problems Installation | Flash Player | Mac page in the section "problems".
Tags: Flash Player
Similar Questions
-
Windows Update does not open, no message error, just will not open.
New and wonderful things abound, I can't open windows update at all (running Windows Vista Home Premium). It shows that I have an update available with the icon in the toolbar, but it does not open, also cannot open it via the control panel. I went to safe MODE and tried unsuccessfully there, Defendor Windows can't find anything extraordinary, SPY-BOT Search and Destroy finds nothing AVAST can't find anything interesting (last full scan) 26/06/2011. I am now at a total loss. Any help would be greatly appreciated
Hi dancingbear.
1 did you change on your computer before the show?
Perform the following troubleshooting methods.
Method: 1
Configure the computer to start in minimum mode and then try to install the updates manually at boot.
To configure the computer clean boot, follow the steps in the below link:
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
You can download updates manually from the following link.
Method: 2
Also I suggest that reset you the windows update components.
-
My computer will not install the important updates Service Pack. Support.Microsoft recommend safe, but in view Mode Setup without failure, you can not open the program update of Windows (from all programs). If I left click or right click and open nothing happens except that I immediately back to the Safe Mode screen.
Hello- What is the antivirus installed on the computer program?
- You receive an error message?
I want to say that windows update does not work in safe mode.I suggest you follow the below methods that can help you solve your problem.Method 1: You can download Service pack 1 in normal mode and install in safe mode.Method 2: If above does not work, follow the procedure below:
Step 1:I suggest you to disable any program of security on your computer and check if it solves the problem.After reviewing the question you must reactivate the security on your computer program.Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.Step 2:I suggest that you put your computer in a clean boot, try to install service pack 1 and control.See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.Reference:Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1See also: -
Creative cloud Updater does not open
The Creative cloud update presents 3 new updates (in the OS X toolbar), but when I click it, the popup window opens and the wheel of progress will run until the end of time, if I click there to close. The creative application of the Cloud itself is displayed as disabled, but if I click on it, the same popup appears with the same behavior. Option to open as window opens a window. Also, I can't leave, that is nothing I do has no effect on one of these 2 apps.
It's relatively new behavior, i.e. Since the last update to creative cloud. I did not bring any changes to the system (OS X 10.10.4) so I guess there is a problem with the latest version of creative cloud.
So much for the update controls were not to build in the applications themselves, so that I could run Photoshop, for example, and check the updates from there instead of being dependent on these programs of buggie (why do we need these two anyway?).
Hi Gary,.
This link might be useful: App does not open. Wheel of progress turn continuously
Kind regards
Sheena
-
Acrobat 10.1.7 update does not open
Acrobat X was purchased as part of the suite CS6. I installed it on my desktop Dell and Samsung laptop computer. Both machines are running Windows 7-64 bit and Internet Explorer 9. Version 10.1.6 worked fine on both machines. I installed the 10.1.7 update yesterday, 5/15.
Today Acrobat 10.1.7 works well on Dell desktop computer
It does not open on the Samsung laptop. When I click on the Acrobat icon desktop or try to run from the Start Menu, nothing happens. There is no error message.
I also have a click with the right button on a PDF file, choose open with sailed to Acrobat X in my Program Files folder and tells to use this program as the default. Yet once again, the problem has not been corrected.
I went into the control panel and repair installing Acrobat 10.1.7. This has not fixed the problem.
Finally, I uninstalled Acrobat and reinstalled the whole Creative Suite, get back version 10.1.1. Works without problems, including Add on IE for the conversion of web pages.
Hello
Please go ahead and update your program. You have installed Acrobat with CS6, we face problems of launch.
After release of the program, if you are having problems launching, try to run Acrobat Patch.
Refer to this link,
Kind regards
Yuvraj.
-
Despite having tried two deperate downloads, the LR4 upgrade downloaded does not open. Any thoughts?
Plug Adobe claim 10.6.8 or 10.7
-
Updates to auto (windows Update) using. Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall. However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up. Then it is impossible to load windows. Just went to a blank screen. Rebooted several times and were able to start it in safe mode. Tried system restore but the same thing happens. Obviously there was something to this update that 'changed' my computer and I'm not happy about it! Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it. Tried online and he tells me that I have never downloaded updates and that none are available.
I use Windows Ultimate x 86. I hope someone can help me!
Got a response from Ms. Good all who have this problem - you have an ATI Radeon graphics card? Driver is causing the conflict. Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '. Reboot and then you can download and install other fancy programs that come with your graphics card.
-
Windows Update does not open a few hot flashes
I click on windows update it looks like will open then just closes
(1) how long updated this issue took place?
(2) what is the suite of security/antivirus installed; is it's subscription and current definitions; has whatever it is detected the last time that the system has been scanned with it?
You can reset the Windows Update components, but If the malware is present on the system update will still be blocked by the malware.
(When was the last time you checked your system for malicious programs?)
Suggest you try to have the system scanned both of the following in this order - do not jump...
In addition to using an anti-virus, as Malware/spyware scan:
http://www.Malwarebytes.org/products/malwarebytes_free>
(MBAM) Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
In addition, scan with the free Version of (SAS)
http://SUPERAntiSpyware.com/superantispywarefreevspro.html >
How to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>
ESET Online Scanner
http://www.eset.EU/ESET-online-scanner>
Access the article KB971058 via Internet Explorer (only)
If no malware is present - How to reset components Windows Updates?
http://support.Microsoft.com/kb/971058>
Download and Save the 50202 Fixit of the above page.
Close all the open programs and browsers prior to running the Fixit.
Given that the downloads fail, when you run the Fixit choose it is the default mode when you run it the first time.
When he finished, check if download updates now.
If the updates are still not download after you run it, then run it again and choose his Aggressive mode.
Then reboot and see if the download updates now.
UTC/GMT is 18:46 on Monday, January 30, 2012
-
After update, does not open Lightroom CC (2015)...
Hello, I've updated Lightroom CC (2015), tonight, after which it will not be open. I tried clicking the button Open several times - no go:
Anyone have any suggestions for what I might try? I would be grateful
Thanks in advance - so,.
Best,
MichaelIt's working now, Geoff - but thank you very much for the follow-up!
Best,
Michael -
Windows Update does not open.
When I click on [START] or on a url, this is what I get: Internet Explorer cannot display this webpage
«what you can try: diagnose connection problems.»
When I click on diagnose connection problems, I get this response: "windows doesn't detect any problems with your internet connection."
XP pro sp3, computer laptop lenovo x 201, windows internet Explorer 8, comcast cable modem w/netgear router, 2.25 ghz, 2.92 GB of Ram, disk hard of 320 mg, automatic updates enabled for downloads, but not automatic installation running.
everyone here has encountered this, and is there a solution?
Thank you very much.
Hello
Visit this link in Forum Internet Explorer
Internet Explorer cannot display this webpage
http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/c8a0b157-820a-4a14-80f3-806ab51717faI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:
Firefox Pei
"C:\Program Files (x 86) \Mozilla" PEINothing happens with every order.
I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "
If you have any ideas, I had appreaciate that your expertise!
Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers. -
OX 10.6.8 2.66 Ghz IntelCore MacBook! 7, memory 8 GB 1067 Mhz DDR3, Safari 5.1.10 (653459.10).
Recent issue. Many Web sites does not open. "Obsolete Safari browser" message. Checking for updates using Apple icon on the toolbar and software up to date.
Not sure how to fix. I could open up many of the same sites 4 days a go. Thanks for any help.
Banks and other sites recently moved to exclude the browsers which do not support the latest encryption methods. The old ways seem too precarious.
Safari 5 is not supported because it only provides this outdated encryption method. 10.6.8 the version of Safari is related to MacOS capabilities and cannot be upgraded separately.
If it's your Mac:
It can be upgraded to the latest version of MacOS, ElCapitan 10.11. ElCapitan is currently available as a download, on sale for $0.
Alternatively, you can put the latest Mozilla Firefox browser, which does not require a Mac OS more later to support it, but won't be available until August.
-
Updated for Firefox 30.0 now Citrix Receiver does not open
I am to discover that anyone who has updated recent firefox 30.0 is not able to open the Citrix Receiver. Opens the window of the application, she will not open the citrix receiver to open FM. I have several people that has updated and can not open FM. Me too, has just updated today to 30.0 and now does not open FM earlier in the morning, I was able to open and use Firefox 29,0/FM.
I disabled all plugins... He's going to open a pop window to 'Open with' Citrix Receiver (default). And yes - it will open our applications now.
So now...
Firefox or citrix must adapt. Please fix so that I don't have to disable plugins app of 200 users. Thank you -
IPhoto does not open or update in the UK store
Hello
My Iphoto has decided that it does not open or update.
When I click on update it says "the object you requested is not available in the UK store.
I followed the instructions on a similar problem, but when I go to purchased apps to remove it, it does not appear. When I then go to 'Show', this option is not available for me.
I am currently using OS X El Capitan version 10.11.5, I think it is a recent update and could be a problem cause (but I don't really know)
Please help me
Thank you
I followed the instructions on a similar problem, but when I go to purchased apps to remove it, it does not appear. When I then go to 'Show', this option is not available for me.
You need iPhoto 9.6.1 on El Capitan. But you can only upgrade to iPhoto, if the version you are using a version installed from the AppStore or associated at least your AppleID on the AppStore. If iPhoto came on installer DVD and you have not purchased it from the AppStore or he did not come preinstalled on your Mac with OS X Lion or newer, then you can is no longer up-to-date. Apple has stopped the development of iPhoto, and update is no longer supported. You can only reinstall versions of iPhoto you already own. It is too late now to convert the DVD of iPhoto versions versions AppStore.
You can open your libraries in Photos for Mac iPhoto library, however. It is the successor to Apple iPhoto. See this support document, how your iPhoto library will appear in Photos: How Photos handles content and metadata for iPhoto and Aperture - Apple Support
Also: Notes on the migration of an iPhoto for iPhoto to Photos for Mac library
-
I downloaded the update for 25.0.1 and he ran. Instead of restarting, I stop the laptop (Vista Home SP2, 64-bit).
When I started the laptop again, I tried to open Firefox, but Norton Internet Security leader Insight could not check the update as a reliable file and did not allow for Firefox open.
I tried to disable file Insight but got the same results.
I ran Live Update to update Norton Internet Security and then tried to open Firefox again.
This time this Norton Internet Security displays a message saying that updater.exe wasn't careful and eliminated.
When I try to open Firefox, Norton now detects Updater 25.0.0.5046, said he trusted, but Firefox does not open.
I want to save the history if possible.
How can I get Firefox to work with recorded history again?
Thank you!Hi iamjayakumars - I was not able to create a new profile, because the Profile Manager does not open. A message from Norton seems "Updater.exe is sure.", but nothing else would happen.
But - the links you sent were very helpful, and I was able to solve the problem by making a UN-installing and then re - install Firefox:
1. backup of the profile.
2. download the installer of Firefox from Mozilla.org with another browser.
3. un-install Firefox from the control panel (ensuring "Delete my personal Firefox and customizations data" was NOT selected.)
4 reinstall Firefox.
Firefox starts successfully with all my old settings and all the tabs I had open the last time it was used appeared as I had hoped.
Thanks a lot for your help!
Maybe you are looking for
-
New password bt doesn't let me access thunderbird mail
I had to change my password for bt as there has been fraudulent activity on email. Now, I don't seem to be able to access my e-mail from Mozilla and it is said that it does not connect until I use the new password, so I put in the password, but she r
-
original title: Vista settings will not save. Why? I have a problem. When you use this computer (and this computer has Windows Vista), I noticed from lately, when I change my settings on the 2 online games, I play, I can disconnect turn it back on an
-
E.mail originatine or transfer of problems.
May not come or e-mail forwards.Email received OK. ZoomTown support determined that the problem is in my computer. ???
-
Installation driver for CM 1015 for Windows 7
I downloaded the driver for printer 1015 CM on my new Acer with Windows 7. I've saved the file, but cannot find a way to install it. All of the suggestions. but I can't install it.
-
BlackBerry 8350i Smartphone settings
Hey everybody very new on the forum but everyone seems useful. Just the new 8350i and I am looking to change ringtones for incoming emails but can find the parameters. My wifes storm had no problem, that goes for incomming tex, emai l voicemail. I co