Update is under Firewall started

Similar Questions

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Firewall started

  At startup, comp displays error message "due to a problem not identified, Windows cannot display Windows Firewall settings.

  From time to time, firewall start shows as OFF, and go in the Security Center, we get the above error message.

  Any ideas on what causes this and what to do about it?

  THX

  Dave

  WinXP SP3 and MSE, all current updates

  Thanks TM

  Can't that occasionally, the Windows Firewall is the only one on the system.  No recent changes.

  I have SP3, then I'll study the link that you point out.

  I'll call him he responds and thx

  D

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• Was previously able to play trump stings on the Internet, but now I can't, under Microsoft Starter 2010

  Was previously able to play trump stings on the Internet, but now I can't, under Microsoft Starter 2010

  What happens exactly?

  Try a system restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Windows could not update the Configuration to start the computer. Installation cannot continue.

  Trying to move from XP to Vista Ultimate.  During installation, the installation gets to 21% on the files and then closes and I get the error "Windows could not update the configuration to start the computer. Installation cannot continue.  Can someone help me with this?

  the problem has been fixed. I started on the dvd to see if I could install it outside of windows. I discovered that I could just install from windows. When I came out, I came across a repair button.  Who find startup errors and fixed them.  I then rebooted and went into windows and was able to install.

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• "Windows could not update the configuration to start the computer" error during the upgrade of Vista in Windows XP

  I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.

  I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.

  In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.

  Hello

  Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software.  Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• cannot receive a third beacase of the updates of the firewall program "I guess"

  cannot receive a third beacase of the updates of the firewall program "I guess"

  What can I do?

  Oren Ben Am Hello,

  Which firewall do you use?

  How could you identify what the firewall prevents the application of updated?

  If you use a third-party firewall, you can disable it and enable the Windows Firewall. It should automatically identify the programs that need to access the Internet and will prompt you for permission.

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error: "Windows could not update the configuration to start the computer. Installation cannot move forward"during the installation of Windows 8 64-bit OEM System Builder on Macbook Pro for help using Boot Camp

  Hello

  I have a brand new Macbook pro and I bought the OEM System Builder of 64-bit Windows 8 driver in a store. My problem is that I have not only not able to install it using Boot Camp. At the end of the installation, a message appears with the following text "Windows could not update the configuration to start the computer. Installation cannot continue.

  I'm not really a tech guy but I also tried to download virtual box and the same error comes back.

  Can someone help me please?

  Thank you!

  Original title: Windows 8 64-bit English OEM System Builder

  The thread is old now, but it is for those who always have this problem.

  When I got the error, I cancelled and restarted the machine. I pressed the 'option' button when starting upwards and he grew the boot partitions. You should see a 'EFI Boot' partition. Choose that and you restart the installation process, but this time it works.

  Supposedly the boot EFI and WinInstall partition should do the same thing. Manually, select one or the other.

• After update, I can't start PS error is 213:5. Anyone know what it is?

  After update, I can't start PS error is 213:5. Anyone know what it is?

  Hello

  Please see the links below for help:

  Solve the 213:xx question and error Acrobat X and XI Acrobat license

  213:5 configuration error

  Adobe Photoshop elements 12-error 213:5

  Hope this helps!

• Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to make a bet to

  Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. Comment do?, Hello plug-in currently creative cloud and asked me to do an update, it will not start because there is an error code of 2. make a comment?

  Error code 2: Creative Cloud Desktop app update failed:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.htmload

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• try to install Medal of Honor Airborne on 32-bit vista, and problems with the windows firewall starts do not.

  OK, im losing my mind.

  I bought a copy of airborne for my 32 bit vista system and found initially that I had to do a few tricks to install and play it like UN-installing ageia phys-x, it was simple enough. Well I have had since stopped playing it and would try to uninstall without result. I tried to fix it and using "C-cleaner.

  I went down some of the files, but I think that my registry is a little buggy so I tried blocking it with c cleaner, he sure found several errors and fixesd them.

  Well, I'm trying now to re - install MOHA and when I put the disc and click autorun the pre-start games window appears with the usual options, play, upgrade, site Web etc... I hit play, it does nothing. I tried to uninstall it from the disk and to halfway through she said "MOHA has not stopped the Installation Wizard prematurely try again later". I can't repair or uninstall or install. I read somewhere that it is a firewall with windows problem and if I run my firewall victory "which I have never on", this should work if the software is added to the 'green' list on the firewall.

  now I find that I can not get my firewall to start. I researched and found a few forums where people explained to the services command prompt and tried to 'start' several 'order' in there and firewall programs will not start giving me this error-windows cannot start service windows firewall. and the code of error-6801.

  I am a novice to tooling autour under the 'software' hood of PCs. I know a bit about the material and that's it. anyone has any ideas for me? otherwise I'm looking to another disorder vista install, I had a moment difficult, installation of the 1st hour and im not not looking forward to try it again...

  Thanks in advance, has soon - a fool lose his mind...

  Hi rocknerd,.

  You can try to download the Windows Installer Cleanup utility and try to remove the game, and then reinstall it.

  You can read the following article to download the Windows Installer Cleanup utility:

  http://support.Microsoft.com/kb/290301

  1. click on Start , then select all programs

  2. in all programs , click Windows Installer Cleanup; the Windows Installer Clean Up Utility window appears, listing the software currently installed on your computer.

  3. Select the game in the list, then click on Remove. If you have multiple files, delete all the.

  After you run the Windows Installer Cleanup utility try to re install the game and check if it works on your computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.